saw ari used for sale

Butterfly valve, butterfly valve, ball valve, butterfly valve, globe valve, gate valve, gate valve, wafer type butterfly valve -Manufacturer: ARI, butterfly valve ZIVA-Z without drive -Type: DN125 PN16 JS1030 -Dimensions: 180/90/H335 mm -Weight: 6.5 kg

Dirt trap, flange dirt trap, filter, coarse or fine sieve -Manufacturer: ARI, mud flaps -Slanted seat with flanges -Type: JL1040 DN32 PN16 -Connection: DN32 -Nominal pressure: PN16 -Quantity: 4 pieces -Price per piece -Transport dimensions: 190/140/H175 mm -Weight: 6.6 kg/pc.

Flap valve, butterfly valve, shut-off valve, gate valve, gate valve, control valve, actuator -Manufacturer: ARI, thrust drive ARI-PREMIO type 2.2 kN -Voltage: 230V -Protection rating: IP65 -Dimensions: 380/180/160 mm -Weight: 4.2 kg

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN16 -Quantity: 1x valve available -Dimension: 180/140/H280 mm -Weight: 7.2 kg

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN20 PN16 -Quantity: 1x valve available -Dimension: 150/130/H260 mm -Weight: 4.4 kg

Steam trap, ball float, steam trap ARI Cona, ball float steam waste -Manufacturer: ARI, float steam trap with flanges -Type: CNU R4 -Connection: DN50 PN16 -Dimension: 275/230/H365 mm -Weight: 23.2 kg/pc.

Key data: 20 t, 600 mm, 600 mm

We offer our reliable Amada Aries-222 punching machine for sale here. The machine is fully functional. The associated tool kit is complete and the machine is fully equipped.

1 ARIOLI continuous washing machine type V21, year 2001, roller width 200 cm, working width 180 cm, 5 washing boxes, inside fabric capacity 30 m each box = 150 m

1 ARIOLI continuous steamer / ager type Mini G, year 2001, roller width 220 cm, working width 200 cm, inside fabric capacity 130 m

Inv. Num. : 7488 Type: Aries 245 II Producer: AMADA Generated: Parameters: Compressive force: 200 kN Machine height: 1963 mm Machine length: 3814 mm Machine width: 2560 mm Machine weight: 11600 kg

Robopac Ariane 6050/2TA Lsealer shrink tunnel Serial: KN055476 L sealer sealing bars 600mm x 500mm, into shrink tunnel aperture 450mm x 200mm, adjustable controls, mobile, 3Ph

ARISA S-2-630-240-120-LD mechanical press was built in 2005 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, such as precise punching and stamping of metal parts. In addition to its standard purpose, depending on the tooling and material feed systems used, the machine can also be used as a transfer press or progressive press. All machining processes are performed with a high press force of 630 tonnes. The drive system, in the form of a flywheel and an eccentric gear, cooperating with two connecting rods, ensures even torque transmission and smooth control of the slider movement. The slider, on the other hand, is guided at eight points using roller guides, which increas ...

NIDEC ARISA S-2-500-240-120-FD mechanical press was built in 2006 in Spain by Nidec Press & Automation Co. (NP&A). It is an extremely versatile press that is used in the series production of components for the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, i.e. precise punching and stamping of metal parts. In addition to its standard purpose, with the appropriate tooling and material feeding systems, the machine can also be used as a transfer press or progressive press. All processes are performed with a high press force of 500 tonnes. The drive system of the NIDEC ARISA S-2-500-240-120-FD press is based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution guarantees even torque transmission and a smooth working cycle. The slider, on the other hand, is guided in multiple points by rolle ...

Surplus/Never used or installed, High suction pressure compression unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!

Code: N0022 Brand: ARIATECH Model: ATB 2 - CE Standard Professional wheeled dust collector with 2 filter bags for dust and chips from carpentries, machine shops and various - CE Standard Structure in sturdy galvanized sheet metal Wheeled base to be able to be moved around the workshop and be connected to more machines Can be mounted indifferently either with the suction mouth facing upward or downward Motor Hp 4 ( Kw 3) Diameter of nylon bags mm 500 Diameter of plastic collection bags mm 500 Overall dimensions of assembled machine mm 1700 x 600 x 2500 h Overall dimensions of disassembled and packed machine mm 1750 x 800 x 800 h Weight kg 130

Steaming Machine Capacity 150 m Width 2200 mm

Used Robopack Ariane 4535ZT foil wrapper. "L" type sealer with integrated shrink tunnel.

A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible.

An Aristo plotter equipped for solid and corrugated board with Multihead OT.T.M.P. II-2 is available. Working width: 2000mm, working length: 3200mm, static repeat accuracy: +/-0.08mm, max. speed: 2.3m/s, max. acceleration: 2G, max. material passage height: 55mm, vacuum pump power: 5.5kW. Machine dimensions X/Y/Z: approx. 2700mm/4250mm/1100mm. Documentation available. On-site inspection is possible.

Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 2TM Year 2010 - Serial-No. KN 096776 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition

TIG and Electric Welding Machine / Inverter ESAB Type LTN 160WIG Welding Machine for TIG and ElectrodeFabr. No. 405-423-0479 Year of construction approx. 2010Power TIG 160 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDL power electrode 140 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDNetz connection 230 Volt, 50 Hz, Schuko plug- stepless power adjustment- 2 stroke and 4 stroke operation- Operating mode rod electrode- 12 meter TIG hose package with hand torch- only DC = DC- HF ignition-

Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...

GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

Key data: 2647 KW, 1000 1/min

Surplus/Never used or installed, High suction pressure compression set unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!

Technical details Number of Ink Cartridges:8 Color Channels:8 Number of printheads:16 Type of input current: Alternating current (AC) Total weight:1,410 kg

General SKU252W329 MakeGea Niro Soavi TypeAriete NS2006P No.8210 Year of construction2010 LocationBarneveld Pressure Working pressure700 Bar Main Features Capacity60 Ltr./Hr. Motor4 KW Pressure700 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogenisercheck Capacity60L/h Single stagecheck Number of pistons:2 InletDN40 OutletDN40 Motor4.0 kW, 400 volt With variable speed drivecheck With frequence controllercheck Information With switchcheck Floorspace0,90x1,30 m Total height1,14 m CEcheckPiston homogenisersGEA NiroMills > Piston homogenisersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

Sale CLAAS ARION 510 CIS with front loader and pallet fork, hydraulically adjustable tines, 115 BST. All tires 100 %, 91 KW, curb weight 5.8 t - total weight 10.2 t, sprung cab, automatic powershift, air conditioning. Front linkage, without FZW, all-round lighting, warning lamp, car towbar. Sale from location 82396 Pähl as seen without warranty and guarantee. Immediately available. 69900 Euro net plus 19 % VAT

Size: 1250 x 2500 mm Impression: 5118 Mio. Equipments: Number of ink cartridges: 8 Color channels: 8 Number of printheads: 16 Type of input current: Alternating current (AC) Total weight: 1,410 kg

Used piston homogenizer from GEA type Ariete NS 3075. Maximum working pressure 20 MPa. Capacity 10,000 litres/h. Control.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN 25 PN 6 -Quantity: 8x valve available -Price per piece -Dimension: 125/99/H233 mm / 125/110/H230 -Weight: 3.9 kg/St.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: ARI Foxboro, Pneumatic Control Valve -Control valve: type ARI-Stevi 451 -Spring accumulator: ARI Type 100403429-216 -Positioner: Foxboro, Schneider Type SRI986-BIDS7ZZZNA -Connection: DN50 PN16-25 -Number: 3x control valve available -Price: per piece -Dimensions: 710/300/H270 mm -Weight: 31 kg

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 30E7 -Connection: DN50 PN6 -Quantity: 5x valve available -Price per piece -Dimension: 150/140/H295 mm -Weight: 7.4 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 180/140/H250 mm -Weight: 5.9 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve type JL1040 without drive -Connection: DN50 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 230/165/H200 mm -Weight: 10.4 kg/pc.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN50 PN16 -Quantity: 2x valve available -Price per piece -Dimension: 230/170/H305 mm -Weight: 10.3 kg/pc.

· diesel engine: 130 HP, · Electric motor: 55 kW, · Maximum lifting capacity: 3,000 kg, · Production capacity: approx. 10–12 tons/hour, · Fuel Consumption: approx. 6–7 liters/hour, · Year of manufacture: 2005, · Operating hours: 3,300 h

Auction-ID: A1-42012-65

Water-cooled. Please note! Without hose package and torch Auction-ID: A1-41275-180

Viewing by appointment only Auction-ID: A1-40237-38

AMADA Aries 222 – CNC Punching Machine General data: Manufacturer: AMADA Model: Aries 222 Machine type: Punching and perforating machine for sheet metal Weight: approx. 2000 kg Dimensions (L x W x H): approx. 3000 x 1500 x 2000 mm Technical details: Pressing force: 20 tons Maximum sheet size (without repositioning): not specified Control system: CNC Amadan 03P Turret configuration: typically equipped with a 10-station tool turret for fast tool changes Description: CNC punching machine AMADA Aries 222 designed for processing and perforating sheet metal. The machine is equipped with a turret system allowing quick tool changes and efficient production, making it suitable for industrial sheet metal fabrication. Auction-ID: A7-45351-6

Equipped with: CLAAS Arion 610 C, 4.590 h, air conditioning, cab suspension, series: A20, 4WD, front weight, double-acting hydraulic valves, 3-point rear linkage, tow bar, front tires: 380/85 R28, rear: 460/85, length 5.16 m, height 2.99 m, CLAAS TCE 15 T, Twin Command Electronic, 15 forward gears, 15 reverse gears, 3 groups, 5 powershift stages switchable under load, electro-hydraulic reverse on steering column, 40 km/h version, pick-up hook. (no license plate registration / no documents) Auction-ID: A1-40133-32

Mitre Cold Circular Saw EISELE Type VMS-III-S-PVTyp No. 430 Fabr. No. 2371 Year of construction 1991Saw range at 90 (round) 120 mmSaw range at 90 (flat) 150 x 110 mmSaw range at 45 (round) 100 mmSaw range at 45 (flat) 120 x 100 mmSaw blade diameter 350 mmSaw blade speed 17 + 34 rpm. Mitre cut 45 to the left, 90 and up to 30(60) to the right, infinitely variableMotor power 2 and 2.6 kWNerg connection 380 volts, 50 Hz- two cutting speed levels over 2 motor speeds-

Vertical band saw PEHAKA type SM 4Fabr. No. 27060 Year of construction approx. 1980Projection 380 mmTable size 620 x 480 mmCutting height 250 mmRoller diameter 400 mmWorking height 1120 mmSaw blade length min. 2900 - max. 3100 mmSaw blade speed 22-125 m/min. infinitely variableMotor power 0.6 / 0.75 kWNet connection 380 volts, 50 Hz- infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds- Saw table tiltable +/- 15- Saw blade butt welding machine IDEAL BS 0-16-

Mitre cold circular saw BERG & SCHMID type MKS 350Year of construction approx. 1980Saw range at 90 Around 110 mmSaw area at 90 Rectangle 160 x 90 mmSaw area at 90 Square 95 x 95 mmSaw area at 45 Round 95 mmSaw area at 45 Rectangle 120 x 90 mmSaw area at 45 Square 80 x 80 mmSaw blade diameter max. 350 mmSaw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchableMains connection 380 volts, 50 Hz- motor with 2 electrically switchable speeds- infinitely variable

Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2