129,254 used machines on RESALE, but how to find them? Machine Search
V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available
Quick clamping device, quick release, quick clamping vice, drilling device, machine vice, drill vice, clamping sleeve, collet -pneumatic collet -Built-in collet: Ø 34 mm -Assembly height without pneumatic cylinder: 208 mm -Dimensions: 410/200/H530 mm -Weight: 34 kg
Inner diameter: 150 mm Grinding depth: 200 mm Table lift: 425 mm large oscillating circuit diameter: 250 / 420 mm Bore: 80 mm Table speed -infinitely-0.5 - 10 m/min Workpiece speeds: 125/176/246/350 rpm Spindle speed: 17000 rpm Total power requirement: 2.2 / 0.5 / 0.9 kW Machine weight ca. 2 t Space requirement approx. 2.40 x 1.20 x 1.45 m Control: conventional
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Adjustment: SK50 -1x clamping sleeve: Ø 16 mm -Weight: 4.5 kg
Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 45 mm -Clamping depth: max. 250 mm -Dimensions: 470/290/H160 mm -Weight: 40 kg
Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg
length: 34 mm internal diameter: 2 - 13 mm amount: 14 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight: . kg taper MK: . Item clamping claws 100-300 mmThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine vice, vise, drill press vise -Jaw width: 160 mm -Jaw height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg
Hydraulic vise, machine vise, hydraulic vise, high-pressure clamp, hydraulic vise -hydraulic tension defective -sold as a source of spare parts -Jaw width: 160 mm -Jaw height: 53 mm -Span: max. 170 mm -Support height: 80 mm -Weight: 62 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max. 170 mm -swivel -Dimensions: 530/330/H170 mm -Weight: 67 kg
Slotting machine vice, vice for slotting machine -Span width: 110 mm -Jaws: 225 x 45 mm -Dimensions: 270/330/H155 mm -Weight: 20 kg/piece
Switching power supply, control unit, modem, power supply -Type: SPA 15-11810 -Price: per piece -Number: 8 available -Weight: 0.6 kg
Quick release device, quick release, quick release vice, drilling device, machine vice, drill vice -Tensioning sleeve: Ø 9 mm -Dimensions: 180/420/H120 mm -Weight: 5 kg
Machine vice, stable vice, drill press vice -Vice: rotatable -Jaw width: 200 x 55 mm -Clamping depth: max. 170 mm -Dimensions: 600/270/H210mm -Weight: 81 kg
Stainless steel kneading bowl with trolley for spiral mixer SP 125 A, Fabr. Kemper,
Stainless steel kneading bowl with trolley for spiral mixer SP 125 A, Fabr. Kemper,
Winding drive, rewind drive D75mm and D150mm, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Winding drive, rewind drive D75mm and D150mm consisting of: 1) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 2) Hypoid gear, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, 3) Winding spigot for reel support, series 3233, D75mm, Spanntec, 4) Attachment adapter for reel support, series 5230, D150mm, Spanntec, 5) Attention: Optionally, we also have the matching motor module SINAMICS S120 6) You are wel ...
Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: Ø 32 -Clamping sleeves: 4/6/10/12/14 mm -Price/Sale: complete -Total weight: 1 kg
Winder spigot for roll reception, series 3233, D75mm, A202008199/01 Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Winder spigot to take up rolls, series 3233, D75 x 370mm, Spanntec - Mechanical-centric expansion of the clamping bars according to the principle of the inclined plane - Incl. intermediate piece to Wittenstein gear - Connection gear: centring D50mm, pitch circle D80mm x z12 - Connection winder spigot centring D50mm, pitch circle 110mm x z12 Attention: We have the complete winding drive, rewind dri ...
Attachment adapter for castor mounting, series 5230, D150mm, A202008199/02, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Attachment adapter for roll holder, Series 5230, D150mm x 330mm, Spanntec, - Attachment adapter for winding spigot D75, Series 3233, - Easy to place and fix on the carrier head - Mechanical actuation when carrier head is activated Attention: We have the complete winding drive, rewind drive D75mm and D150mm with servo motor, hypoid gear, additional flange, winding spigot and attachment adapte ...
Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg
Machine vise, sturdy vise, drill vise -Machine vice: rotatable -clamping jaws 240 x 60 mm -Clamping depth: 285 mm -Dimensions: 630/315 / H200 mm -Weight: 73 kg
Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg
Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg
Machine vise, heavy duty vise, drill press vise -Machine vise: rotatable -Clamping jaws 200 x 40 mm -Clamping depth: 300 mm -Dimensions: 630/325/H200 mm -Weight: 82 kg
Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 265 x 70 mm -Clamping depth: 285 mm -Dimensions: 620/300/H210 mm -Weight: 81 kg
Used flowpack packaging machine by Italian company PFM Spa model SWIFT. New 2000. Power supply: - 380 V - 50 Hz - 7.1 A - 2.7 kW Weight: 400 kg.
V-belt pulley, pulley -V-belt pulley: single-groove pulley Ø 125 mm -V-belt width: 13 mm -Receptacle: Ø 24 x 32 mm -Quantity: 7x pulleys available -Price per piece -Dimensions: Ø 130 x 32 mm -Weight: 0.7 kg/pc.
V-belt pulley, pulley -V-belt pulley: single-groove pulley Ø 125 mm -V-belt width: 13 mm -Receptacle: Ø 30 x 32 mm -Quantity: 4x pulleys available -Price per piece -Dimensions: Ø 130 x 32 mm -Weight: 0.7 kg/pc.
Used laboratory dissolver, column dissolver with geared motor and manual speed setting from Italian company Ferri Spa type F30/D. Description: - stepless speed adjustment - manual - manual column lifting with counterweight - current control box with control panel - suitable for small containers - height 1250 mm - width 600 mm - length 750 mm - weight approx. 80 kg - motor power 1 hp - number of engine revolutions 2800 - diameter of dispersing disc: 30/140 mm - voltage: 220/230V
Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamping brackets, pipe clamps, pipe clamps -Pipe clamp: Pipe clamp with quick-release fastener -Clamping range: Ø 302 to 315 mm -Number: 5x clamps available -Price per piece -Dimensions: 325/95/H435 mm -Weight: 5.1kg/pcs
Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg
machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice drilling machine vice -Clamping jaws: 100 x 45 mm -Clamping depth: 75 mm -Dimensions: 230/140/H60 mm -Weight: 2.7 kg
Key data: 250 mm, 5 kW, 4700 m³/h
Spänex dust extractor SMU 4500.11 Suction nozzle 250 mm Cleaning vibrating motor Nominal flow rate 4700 m³/h Minimum flow rate 3530 m³/h Motor 5.5 kW Filter renewed
Machine vise, heavy duty vise, drill press vise -Handover: in the current condition as seen -Base plate: See photos for damage -Machine vice: rotatable, clamping jaws 160 x 40 mm -Clamping depth: 185 mm -Dimensions: 445/225/H145 mm -Weight: 33 kg
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 5 grooves, type SPA 140-5 -V-belt width: 13 mm -Receptacle: Ø42 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø146 x 80 mm -Weight: 4.9kg
Spandau Twin Screw Pump 6.3 kW Power: 6.3 kW Voltage: 400/690 V Frequency: 50 Hz Flow rate: Qmax: 55 l/min. Speed: 3525 rpm. Max. diving depth: 262 mm More pumps new and used - you can find them in our shop! International shipping costs on request!
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 5 grooves, type SPA 140-5 -V-belt width: 13 mm -Receptacle: Ø42 x 45 mm for taper clamping bushing 2517 (can be changed) -Dimension: Ø146 x 80 mm -Weight: 3.7kg
V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley SPA 180-4 -V-belt width: 13 mm -Receiver: Taper bushing Ø 55 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 185 x 65 mm -Weight: 7.6 kg
The scope of delivery includes: 01x Shelf connector, second choice (new) Manufacturer: Kimer for shelf spacing: approx. 200 mm Material colour: sendzimir galvanized Total length: approx. 280 mm Profile: U 78 x 30 mm Weight: 0.47 kg | Pcs. Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or contamination may be present. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 160-4 -V-belt width: 13 mm -Receptacle: Ø 55 mm taper bushing 2517-55 (can be changed) -Quantity: 1x V-belt pulley available -Dimensions: Ø 167 x 65 mm -Weight: 5.8kg
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 5 grooves type SPA 160x5 2517 -V-belt width: 13 mm -Receptacle: Ø55 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø165 x 80 mm -Weight: 6.3kg
Machine vice, stable vice, drill press vice -Machine vice: clamping jaws 150 x 50 mm -Clamping depth: 143 mm -Groove: 104 x 17 mm -Dimensions: 455/170/H125mm -Weight: 25 kg
Machine vice, stable vice, drill press vice -Machine vice: centric clamping -Clamping jaws: 155 x 40 mm -Clamping depth: 194 mm -Dimensions: 580/220/H140mm -Weight: 38 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 131 mm -Groove width: 27 mm -Dimensions: see photo technical drawing -Dimensions: 151/70/H42 mm -Weight: 2,1 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 173 mm -Groove width: 42 mm -Dimensions: see photo technical drawing -Dimensions: 205/82/H46 mm -Weight: 3.3 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 208 mm -Groove width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 230/80/H50 mm -Weight: 4.3 kg
Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg
maximum number of results exceeded
please refine your search
