sandvik coromant used for sale

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, Secodex face milling cutter head shoulder milling cutter -Type: R290-160Q40-12M 848471 -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 160 x 60 mm -Weight: 3.9 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head corner milling cutter 2 pieces -Type: 490-125Q40-14M 725386 -Adapter: SK50x40x40 -Delivery/Price: complete -Dimensions: Ø 125 x245 mm -Weight: 6.8 kg/piece

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 4 pieces -Type: Ø 100/110/140/160 mm various versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 31.7 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 40 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head, shoulder milling cutter -Type: R 282.2 160 -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160 x 62 mm -Weight: 4.9 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, cutter head milling cutter -Type: R260.22-080-15 -Hole: Ø 27 mm -Dimensions: Ø 90 x 50 mm -Weight: 1.3 kg

10 chisels to hydraulic dismantling hammer Sandvik Rammer size G100 and G120. 3 chisels are new 7 chisels are freshly forged.

Lots of monobloc boring bars Rock drills and extensions from tunnelling unused and used - Diameter: 23 to 83 mm - Length: 500 mm - 5600 mm Manufacturer: ROCBO, SANDVIK, BÖHLERIT u.a. Cone Boring Rods, Monobloc Boring Rods and Extension Boring Bars The drills come from the bearing dissolution of a tunnel construction company and are mostly as good as new. See list for details Changes and errors in technical data, information and prices as well as prior sale. Number Description Description Addendum 3 cone boring bars length approx. 4,000 mm inserting end approx. 25x159 mm, as good as new 1 cone boring bar length approx. 5,000 mm Inserting end approx. 22x82 mm, as good as new 2 cone boring bars length approx. 1,000 mm Inserting end approx. 22x82 mm, as good as new 25 cone boring bars length approx. 2,400 mm inserting end approx. 25x159 mm, as good as new 18 c ...

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Manufacturer: Sandvik Coromant R391.B03R-40F53 A -Socket: Ø 40 mm -Boring tool holder: 16 x 8 mm -Tool: Ø 435 mm -Weight: 6.1 kg

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Sandvik Costa, rotating centering point, centering cone flattened -Recording: MK5 -Model: A-5-65085 -Dimensions: Ø 110 x 275 mm -Weight: 6.4 kg

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

ID3763 Sandvik Pantera DP1100i Year of construction 2014 approx. 11.060 hours/hours Blasting hole drill rig, with rod changer, cab with safety grille, radio, roller blinds for cab windows, TIMi – rig alignment instrument, hydraulic tail supports, central lubrication system, all servicing carried out by Sandvik, good condition, the last hammer service was carried out 300 operating hours ago & the last safety inspection in January 2026. Blast hole drilling rig, with rod changer, cab with protective grille, radio, roller blinds for cabin windows, TIMi – carriage alignment instrument, hydr. Bottom supports at the rear, central lubrication system, all service done by Sandvik, good condition, the last hammer service was carried out 300 hours ago & the last safety inspection in January 2026

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207629 Diameter: Ø 12.25 mm 420279013 K20 Holder: Ø 32 mm New ! Dimensions: 170 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207628 Diameter: Ø 10.25 mm 420279012 K20 Holder: Ø 32 mm New ! Dimensions: 160 x 32 x 32 mm

The machine is in very good condition Year of construction 2008 Max. Duty 40mm Capacity: approx. 10-50 to./h Weight is 6.3 tons Dimensions: 3.5 x 2.02 x 2.21m

Milling cutters, End mills, drop cutters, Unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !

Three units with tools for shaping / bending diemaking Kris PCM and Sandvik including metal table to mount/hammer onto

BR20 , Sandvik As good as new, see photos!

Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -Number: 25 pieces turning tools -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm -Weight: 34 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min : ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces ) suitable e.g. for OKUMA box dimensions approx. 500 x 300 x 200 mm weight approx. 50 kg 3 x EPPINGER 4.200.231 drilling and milling head 3 x EPPINGER 4.200.289 drilling/milling head 1 x Drill- Milling head WTO 4 1 06 1 6006 - 40 1 x COROMANT 410 1200 72 - 40 drilling and milling head 1 x 2-jaw chuck KH 1-40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In 2 boxes, unused

Including locker with: diamond inserts, aluminum turning inserts, aluminum channel inserts. Various manufacturers including SANDVIK, KOMET, SECO and others. Cabinet size: 990 × 650 × 1050 mm Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-45181-6

Table size 2000x1380mm, width between bridge uprights approximately 3650mm. Auction-ID: A1-45188-243