sanding used for sale

- Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW - Spannungsschwankungen max. +/- 5 %

- Producer Leif & Lorenz - Type B6 - Working width 1100 mm - Year of construction 2017 - 1. Unit - Stain brush System FlexTrim - Motor power 1,1 kW - Brush head speed adjustable by converter - Vacuum transport belt - Feed speed infinitely adjustable - Length 1.000 mm - Location - Colour 7035 - Voltage / HZ 400/50

- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %

Brush sanding machin with 3 working units. Machine has only a few operating hours. 1st working unit: - 5 rotating heads with 3 discs each - disc diameter 125 mm - quick change of the discs - motorized height adjustment 2. Station: - brush with diameter 300 mm - motorized height adjustment - Electronic inverter 4 kW 3. Station: - brush, diameter Durchmesser 300 mm - motorized height adjustment - Electronic inverter 4 kW - Rotative blower cleaning panel - Touch Screen IPC COMPACT 8,5 - conveyer with vacuum table - vacuum fan 7,5 kW - Vorschubgeschwindigkeit wird über einen FU geregelt - conveyer electronic inverter 2,2 kW - Producer Viet - Type Opera 5-3.3 XLL - Working width 1.350 mm - Year of construction 2018 - Working height 900 mm - Max. part height 200 mm - Vacuum transport belt - Operating side, left - Standort, nicht am Lager - Voltage / HZ 400/50 - Spannungsschwankungen ma ...

wird mit neuem VakuumTransportband ausgeliefert. - Producer Fladder - Type Gyro 300 VAC - Working width 1300 mm - Year of construction 1994 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

sanding height: 150 mm : 390 mm Sanding paper width: 400 mm engine: tba KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with two vacuum fans - Producer Fladder - Type Gyro 300 VAC-2 - Working width 1300 mm - Year of construction 1997 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - With sound insulating cabinet - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

Used for sanding and finishing shoe components. Auction-ID: A7-45167-35

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for visual access to the units LED lighting for indoor lighting Vacuum table with 3 kW electric fan Tynex Texturing Brush with Tynex Brush K46 Y-type - Pneumatic on/off for the roller of the first unit ? R? - Pneumatic on/off for the roller 2nd abrasive belt roller combination unit TC - Elastic electronic sanding shoe (56 graduation) - Electronic thickness adjuster FOX 1000S electronic control 10.4 inch touch screen 15 kW motor power 1-motor version

Code: 0280 Brand: DIMA CEFLA Model: KLEIN/S - CE Standard Universal sanding machine for straight and curved pieces of wood, furniture, doors, frames, panels, composite materials and various - CE Standard Brush diameter 200 mm - Height adjustable shaft Sanding disc diameter 230 mm Motor 2,2 Kw Electronic speed variator Work surface dimensions 1400 x 920 mm Work surface dimensions with extensions 2200 x 1200 mm Work surface height 900 mm Suction inlet diameter 150 mm Overall dimensions mm 1600 x 1100 x 1150 h Weight kg 900

sanding machine designed for smoothing and refining cutting boards used in the cutting process. Auction-ID: A7-45167-23

Wide Belt Sander SCM Sandya 7 S | SCM Group | Sandya 7 S | 2007 | Serial Number: AE7029955 • Power: Unknown (400 V, 3-phase, 50 Hz electrical system) • Condition: Used • Additional Notes: Additional 6 pcs of sanding belts. Rated voltage 400 V, 3~ phase, 50 Hz. Nominal current 65 A. Short-circuit current rating 10 kA. Pneumatic system max pressure 8 bar. Control panel with programmable sanding units. Auction-ID: A7-40551-4

Used for sanding and finishing shoe components. Auction-ID: A7-45167-7

Modular unit, finishing unit, sanding unit, sanding station, belt sander, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sander -comes from a Homag edge banding machine -swivelling -height adjustable -Max. Sanding belt width: 80 mm -oscillated -Sanding shoe: with air cushion -Drive: 1.1/1.4 kW -Speed: 1425/2850 rpm -Sanding shoe dimensions: L/W mm -Dimensions: 1000/1200/H1000 mm -Weight: 292 kg/piece

Aggregate kit, finishing unit, grinding unit, grinding station, belt sander, belt grinder, edge grinder, edge sander, profile sanding unit, small belt sander -Manufacturer: KED Kurt Ehemann, Homag, belt sanding unit from belt sander -Type: unfortunately no type designations -Roll: Ø 215 x 295 mm drum motor NG 45/2n 3 kW 2850 rpm -Roll: Ø 150 x 160 mm -Individual components: see photos -Transport dimensions: 830/690/H360 mm -Weight: 144 kg

Manufacturer: Weber KSV 1350 4, Type: KLE 1300, Year: 2008, Control: Weber, Monting of the machine: Quer/längs/Quer/Quer/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 5, Sanding belt dimensions: 1370 X 2620/5100 X 150, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 3, Längsschleifaggregate: 1, Bürstenaggregate: 1, Rubber roller: no, Bürstenaggregate: 1, Band 1 Leistung kW : 15, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 2 Leistung kW : 21, Belt 2 shoe unit: CBF Aggregat, Band 2 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 3 Leistung kW : 15, Band 3 Schuhaggregat: yes, Band 3 Queraggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 4 Leistung kW : 15, Band 4 Queraggregat: yes, Band 4 Schleifbandgesc ...

Manufacturer: Heesemann, Type: MFA 6 Impression, Year: 2008, Control: Längs/Stahlwalze/ Bürste, Monting of the machine: 1300, Double sided sanding line: 3 - 140, Sanding width mm: 1, Sanding hight mm: 2620 x 1350, Number of sanding belts: 0,5 - 12, Konstantentisch: Konstatntentisch, Bürstenaggregate: CSD , Rubber roller: 16, Band 1 Leistung kW : 15, Konstantentisch: Konstatntentisch, Band 2 Leistung kW : 5 - 25, Belt 2 shoe unit: 3, Band 2 Queraggregat: yes, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Kombiaggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 1,5 kW, Year :2008

Manufacturer: Steinemann, Type: Nova 220 K, Year: 1994, Control: oben / unten / Bürste / Bürste, Barcode: yes, Monting of the machine: 2200, Double sided sanding line: 1 - 150, Sanding width mm: 2, Sanding hight mm: 2620 x 2300, Sanding belt dimensions: 11, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : 11, Frequency control of belts: 2 x 275 mm, Steel roller: no, Band 1 Leistung kW : 90, Belt 1 shoe unit: 90, Band 2 Leistung kW : 4 - 24, Belt 2 shoe unit: 9, Band 2 Kombiaggregat: 1, Band 2 Queraggregat: no, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Schleifbandgeschwindigkeit m/s : 2 x 1,1 kW, Year :1994

Manufacturer: Unitek, Type: 3N RRT 1100, Monting of the machine: Stahl/Gummi/Schuh, Sanding width mm: 1100, Sanding hight mm: 160, Number of sanding belts: 3, Shore roller 1: Stahl 160 mm, Shore roller 2: Gummi 220 mm, Walze 3 Shorehärte : Schuh 50 mm, Band 1 Leistung kW : ca. 15, Band 1 Schleifbandgeschwindigkeit m/s : 18, Band 2 Leistung kW : ca. 15, Band 2 Schleifbandgeschwindigkeit m/s : 16, Band 3 Kombiaggregat Walze/Schuh: yes, Band 3 Leistung kW : ca. 15, Band 3 Schleifbandgeschwindigkeit m/s : 14, Table hight adjustment by engine: 0,25 kW, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 1,5,

Manufacturer: Heesemann 5 Aggregate, Type: LSM 8, Year: 2005, Control: Heesemann, Monting of the machine: Stahlwalze/Querband/Längsband/Längsband/Längsband/Bürste, Sanding width mm: 1300, Sanding hight mm: 3-80, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Transverse sanding units: 1, Längsschleifaggregate: 3, Bürstenaggregate: yes, Steel roller: 1, Bürstenaggregate: yes, Band 1 Leistung kW : 37/Walze, Band 1 Schleifbandgeschwindigkeit m/s : 28, Belt 2 shoe unit: Querschleifaggregat, Band 2 Kombiaggregat Walze/Schuh: zuschaltbare Stahlwalze, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 0,5-24, Band 3 Leistung kW : 20/24, Band 3 Schleifbandgeschwindigkeit m/s : 10-20, Band 4 Leistung kW : 18,5, Band 4 Schleifbandgeschwindig ...

Manufacturer: Heesemann , Type: LSM 8, Year: 1998, Control: Heesemann, Sanding width mm: 1300, Sanding hight mm: 1200, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Belt 1 shoe unit: Queraggregat, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : 13/17, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : regelbar, Transportbandantrieb kW: ca.4, Intermediate sanding of lacquer: yes, Vacuum table: yes, Segment sanding shoe: yes, Werkstück-Abstrahleinrichtung: yes, Ionising: yes, Year :1998

Manufacturer: Weber, Type: OFZ-KS 2, Year: 1993, Control: Weber, Monting of the machine: Quer/lkombi-Schuh/längs, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350/4650 X 150, Rubber roller: 1, Shore roller 1: 150 mm (gummi), Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 1 Schleifbandgeschwindigkeit m/s : 11/22, Belt 2 shoe unit: Kombi, Band 2 Kombiaggregat Walze/Schuh: yes, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-20, Band 3 Kombiaggregat Walze/Schuh: schuh, Band 3 Leistung kW : 11, Band 3 Schleifbandgeschwindigkeit m/s : 2-20, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 4-25, Intermediate sanding of lacquer: yes, Constant table hight: ...

Manufacturer: Ernst, Type: 830-2, Monting of the machine: längs / längs / längs, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 1.400 x 3.150, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2 - 10, Belt 2 shoe unit: yes, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 2 - 10, Band 3 Leistung kW : 18, Band 3 Schleifbandgeschwindigkeit m/s : 1 - 7, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 8 - 30, Vacuum table: yes, Brushing unit: 3 kW, Diameter/ brush bristles: 200,

Manufacturer: Heesemann, Type: FGA 8, Year: 1994, Control: Heesemann, Monting of the machine: Längs / Bürste / Bürste, Sanding width mm: 1.350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Längsschleifaggregate: 18,5, Belt 1 shoe unit: 0,5 - 16, Elektronische Tastung mm: yes, Table hight adjustment by engine: no, Combi unit roller/shoe: 4,5 - 21, Table hight adjustment by engine: 1,85, Transportbandantrieb kW: yes, Intermediate sanding of lacquer: 5,5 kW, Programmanwahl extern: 3, 6 + 1,5 kW, Pressure pads for short workpieces: 250 + 150 mm, Levelling brush for paint: 4.500, Year :1994

Manufacturer: Heesemann, Type: LSM 8, Year: 1998, Control: neu 2017, Monting of the machine: Q / L / L/ B, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3, Sanding belt dimensions: 5.400x150 2.620x1.350, Table hight adjustment by engine: no, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13 / 17, Band 1 Schleifbandgeschwindigkeit m/s : 12 / 24, Belt 2 shoe unit: yes, Band 2 Leistung kW : 16,5 / 21, Band 2 Schleifbandgeschwindigkeit m/s : 10 / 20, Band 3 Leistung kW : 16,5 / 21, Band 3 Schleifbandgeschwindigkeit m/s : 10 / 20, Elektronische Tastung mm: 16, Frequency control of belts: no, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: 4,0, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: 7,5 kW, Brushing unit: 150 mm, wast cleaning: EA 2, ...

Manufacturer: Heeseman , Type: LSM 6, Year: 1994, Control: Kuhnke/Heesemann, Equipment of machine 2: Quer/kombi-Längs/kombi-Längs/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 3620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: 2, Steel roller: 2, Transverse sanding units: 1, Längsschleifaggregate: 2, Bürstenaggregate: 1, Band 1 Leistung kW : 13/17, Band 2 Leistung kW : 13/17, Band 3 Leistung kW : 13/17, Table hight adjustment by engine: yes, Transportbandantrieb kW: ca.4, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Werkstück-Abstrahleinrichtung: yes, Year :1994

Manufacturer: Arminius Leistenfräs und Schleifmaschine 2 Maschine verstellbares Bett, Type: SP 39, Year: 1994, Monting of the machine: 2 X Fräsen/2 X vertikal schleifen/2X horizontalschleifen/Radiusshleifen schwenkbar/2 Radius schleifen oben/unten, Sanding width mm: 120, Sanding hight mm: 120, Sanding belts horizontal/bottom: keine, Sanding belts horizontal/longitudinal: 5, Sanding belts horizontal/traverse: no, Number of sanding belts left: 6, Sanding belts on right, qty.: 6, Bandschleifaggregate Stk.: 10, Bürstenaggregate Stck.: no, Right side units Qty.: linke und rechte Seite sind gleich Bestückt, Unit 1 tiltable: Zerspaner, Unit 2 slewable: rechts und links Profifräse, Aggregat 2 kW: ca. 2,2 , Unit 3 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 3 kW: 1,5, Unit 4 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 4 kW ...

Manufacturer: Bütfering, Type: SCO 413/TQEQ, Year: 2007, Control: Programmspeicher 600, Barcode: möglich, Monting of the machine: Querschleifen/Längschleifen/Querschleifen/Enststaubung, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rollers: keine, Transverse sanding units: 2, Längsschleifaggregate: 1, Bürstenaggregate: 1, Belt 2 shoe unit: Querschleifen, Band 2 Leistung kW : 13,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-16, Belt 2 synchronous and reverse run: Längsschleifen, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 15, Band 3 Schleifbandgeschwindigkeit m/s : 2-18, Band 4 Kombiaggregat Walze/Schuh: Querschleifen, Band 4 Leistung kW : 13,5, Band 4 Schleifbandgeschwindigkeit m/s : 2-16, Separation of sampling in mm: 25, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 4- ...

Manufacturer: Costa, Type: SbF, Year: 1999, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Shore roller 1: ca.35, Längsschleifaggregate: 11, Belt 1 shoe unit: regelbar, Band 4 Schleifbandgeschwindigkeit m/s : yes, Table hight adjustment by engine: yes, Elektronische Tastung mm: 5-25, Separation of sampling in mm: 0,25, Continous adjustable feeding speed m/min: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Constant table hight: yes, Year :1999

Manufacturer: Costa, Type: CCC + CCC 1150, Year: 1998, Monting of the machine: obenWalze/Walze/Walze , Equipment of machine 2: untenWalze/Walze/Walze, Double sided sanding line: yes, Sanding width mm: 1150, Sanding hight mm: 120, Number of sanding belts: 6, Sanding belt dimensions: 2620 X 1150, Table hight adjustment by engine: yes, Rubber roller: 3 +3, Shore roller 1: 70, Shore roller 2: 70, Walze 3 Shorehärte : 60, Längsschleifaggregate: ca.34, Belt 2 shoe unit: ca.22, Belt 2 synchronous and reverse run: ca.17, Belt 3 synchronous and reverse run: 34/22/17, Table hight adjustment by engine: yes, Combi unit roller/shoe: 8-20, Table hight adjustment by engine: ca 3 + 3, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Pressure pads for short workpieces: 150, Year :1998

Manufacturer: Heesemann, Type: LSM 8, Year: 2003, Control: Steuerung der Anlage Neu, Monting of the machine: Quer / Längs / Bürste / Bürste, Sanding width mm: 1400, Sanding hight mm: 3 - 120, Number of sanding belts: 2, Sanding belt dimensions: 2.620 x 1450, Transverse sanding units: 1, Längsschleifaggregate: 1, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Belt 2 shoe unit: yes, Band 2 Schrägstellbar Grad : 15, Band 2 Innenliegendes Drucklamellenband : 0,5 - 12, Band 4 Schleifbandgeschwindigkeit m/s : 16, Belt 4 synchronous and reverse run: 2, Frequency control of belts: 5 - 25, Combi unit roller/shoe: 2,2, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: yes, Typ/Stückzahl: 5,5 kW, Vacuum table: 4,0 + 1,5 kW, Brushing unit: 250 + 150 mm, Ionising: 7.600, Year :2003

Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008

Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007

Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Control: Heesemann, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Band 1 Leistung kW : 11, Band 1 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Frequency control of belts: yes, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 8 - 40, Transportbandantrieb kW: 4,0, Intermediate sanding of lacquer: yes, Vacuum table: 5,5, Noise enclosure: yes, Brushing unit: 4,0 + 1,5 kW, Texturing brush diameter: 250, Levelling brush for paint: 150, Weight in kg: 8850, Year :1995

Manufacturer: Heesemann, Type: LSM8 U + LSM8 S, Year: 1997, Control: Heesemann, Monting of the machine: L / L / L , Equipment of machine 2: L / L / L, Double sided sanding line: yes, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3 + 3 , Sanding belt dimensions: 2620 x 1350, Rollers: 2 + 2, Steel roller: 2 + 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 24, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : 10/20, Continous adjustable feeding speed m/min: 3 - 15, Transportbandantrieb kW: 4 + 3, Abrasive belts at bottom: 3, Intermediate sanding of lacquer: no, Vacuum table: 15 / 5,5, Noise enclosure: yes, Brushing unit: yes, wast cleaning: 0,75 kW, Weight in kg: 11000+9000, Year :1997

Manufacturer: Heesemann, Type: MFA 8/Rechtsmaschine, Year: 1996, Monting of the machine: Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 1, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: yes, Diameter/ brush bristles: 150, Year :1996

Manufacturer: Delle Vedove, Type: SPL /7/200, Year: 1995, Sanding width mm: ca.10-100, Sanding hight mm: 80, Sanding belts horizontal/bottom: 1, Bandschleifaggregate Stk.: 1, Bürstenaggregate Stck.: 3 links+3 rechts, Right side units Qty.: Band, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: Bürste, Aggregat 2 kW: ca.1,2, Unit 3 slewable: Bürste, Aggregat 3 kW: ca.1,2, Unit 4 slewable: Bürste, Aggregat 4 kW: ca.1,2, Unit 5 slewable: Bürste, Aggregat 5 kW: ca.1,2, Unit 6 slewable: Bürste, Aggregat 6 kW: ca.1,2, Unit 7 slewable: Bürste, Aggregat 7 kW: ca.1,2, Transport chain mm: yes, Feeding speed min-max m/min: 5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Brushing unit: yes, machine ready for demonstration: yes, FREE TEXT: mit automatischer Schleifscheiben Zustellvorrichtung für Schleifscheibenaggregate/inkl Siko Apstapelanlage, Year :1995

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Monting of the machine: Quer/Längs/Längs/Längs/EA , Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 5400 X 150/2620 X 1350, Belt 1Transverse sanding unit: yes, Band 1 Leistung kW : 13/17, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13/17, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 13/17, Band 4 Kombiaggregat Walze/Schuh: Schuh, Band 4 Leistung kW : 13/17, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 5-25, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, wast cleaning: EA 2, Year :1995

Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001

Manufacturer: Heesemann, Type: LSM 8, Year: 2016, Control: PC 10,4 , Monting of the machine: Walze / Walze, Sanding width mm: 1350, Sanding hight mm: 0,5 - 100, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Steel roller: 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Belt 2 synchronous and reverse run: yes, Frequency control of belts: 2, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Vacuum table: yes, Brushing unit: 1,5 kW, Year :2016

Manufacturer: Heesemann, Type: MFA 6, Year: 2011, Control: PC, Monting of the machine: Quer/Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 2150 X 1350, Steel roller: kombi, Belt 1Transverse sanding unit: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: yes, Brushing unit: yes, FREE TEXT: vakuumteppich/Zustand sehr gut, Year :2011

Manufacturer: Bütfering, Type: AWS 2CE 1100, Year: 1992, Monting of the machine: Walze / Schuh, Sanding width mm: 1100, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 1110 x 1900, Steel roller: yes, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Schuhaggregat: 11, Band 2 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Gleich und Gegenlauf: yes, Frequency control of belts: no, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: no, Noise enclosure: yes, Brushing unit: 0,55 kW, Weight in kg: 3300, Year :1992

Manufacturer: Viet, Type: S3 T T23TM, Year: 2007, Monting of the machine: Quer/Quer/Bürste , Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 8700 X150 /2620 X 1350/, Table hight adjustment by engine: yes, Band 1Querschleifaggregat: 2, Band 1 Leistung kW : 22, Band 1 Schleifbandgeschwindigkeit m/s : 5-20, Band 2 Schuhaggregat: yes, Band 2 Leistung kW : 22, Band 2 Schleifbandgeschwindigkeit m/s : 5-20, Band 2 Drucklammellenband: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Pressure pads for short workpieces: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Year :2007

Manufacturer: Hongtai, Type: 2 Walzen Schleifmaschine, Year: 2017, Control: Weinwiev, Monting of the machine: Walze/Walze/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1350, Shore roller 1: ca.40, Shore roller 2: ca.60, Band 1 Leistung kW : ca.15, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : ca.15, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Frequency control of belts: 2, Continous adjustable feeding speed m/min: 10-20, Vacuum table: yes, Diameter/ brush bristles: ca.200, Weight in kg: 5000, Year :2017

Manufacturer: Heesemann, Type: LSM 8, Year: 2005, Monting of the machine: Q/L/L/Bürste, Sanding width mm: 1.300, Sanding hight mm: 3 - 140, Number of sanding belts: 3, Sanding belt dimensions: 3.250x1.350 6.200x150, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13 / 17, Band 1 Schleifbandgeschwindigkeit m/s : 12 / 24, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13 / 17, Band 2 Schleifbandgeschwindigkeit m/s : 10 / 20, Band 3 Leistung kW : 13 / 17, Band 3 Schleifbandgeschwindigkeit m/s : 10 / 20, Elektronische Tastung mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 6 - 30, Transportbandantrieb kW: 5,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: 7,5 kW, Weight in kg: 8.000, FREE TEXT: mit Neuem Transportteppich/Maschine gereinigt und gestestet, Year :2005

Manufacturer: Heesemann, Type: UKP 22, Year: 1989, Control: Hand, Sanding belt hight: 60, Table size mm: 2100, Roller diameter D mm: 10-60, Table stop mm: 60, Sanding area (beam): 5-25, Sanding belt length max mm: yes, Feeding speed min-max m/min: 6, Milling units: yes, Controllable slewable: no, Laquer sanding: ca.2, Main engine kW: yes, Controllable slewable: no, Laquer sanding: ca.2, 1st sanding motor controlled and tiltable: yes, Controllable slewable: no, Laquer sanding: ca.2, 2nd sanding motor controlled and tiltable: yes, Controllable slewable: no, Laquer sanding: ca.2, Frequency controlled: yes, Power kW: yes, Length front table mm: EGZ 2 Stück, Control panel on top: yes, Belt clamping pneumatically: inkl.2 EG Radienschleifgeräte und ein Bürstenmotor/Bürstenschleifmotor mit Scotch Walze/Länge Maschine 8400 mm, Year :1989

Manufacturer: Heesemann , Type: LSM 8, Year: ca. 1998, Monting of the machine: Quer/lang/Scotch/Bürste/Entstaubung, Sanding hight mm: 3-80, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350/5400 x 1400, Band 1Schleifbandgeschwindigkeit m/sec: 0,3-12, Band 2 Schleifbandgeschwindigkeit m/sec: 0,3-12, Table hight adjustment by engine: yes, Cross sanding unit: 1, Shoe unit: 1, Elektronische Tastung mm: 16, Frequency control of belts: 2, Power belt 1 in kW: 11, Performance in kW belt 2: 11, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 1,6-9, Feeding engine kw: 1,5, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Maschine vorführbereit: yes, Voführung möglich: yes, FREE TEXT: 1 zusätzliche Scotch Bürste 4 Kw, Year :1998

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003