sanding machine used for sale

20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

Spiral dough mixer with fixed stainless steel kettle for max. 120 kg dough. Vat cover with swivelling lid part, motor protection by overcurrent relay, electrical switching and control unit in the machine. Kneading process over time with 2 timers and synchronous motor, with automatic switching and switch-off. -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough- -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor -Locking by 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -8 kW 18A -Weight of the machine approx. 550 kg -Condition "very good" as good as new

Brochure production Nagel Foldnak 8

We sell a Sinmag spiral kneading machine incl. 3 tank cars (suitable for max. 120kg dough). The machine is in good bakery condition.

3 pieces diameter 63 mm/ 4 pieces diameter 80 mm/ 3 pieces diameter 100 mm/ 1 piece diameter 125 mm/ unused and in original packaging

Stored in working condition with numerous accessories, digitally adjustable with control box. The buyer must provide his own transport. Elevator available to charge it.

Klinger bottle washer, year of construction: 2000, capacity approx. 10,000 bottles / hour, Siemens S7, liter cell, currently on 330 ml + 500 ml + 500 ml swing-top bottle. Bottle diameter: 50 - 90 mm / Bottle height: 110 - 330 mm. Klinger Bottle washer, Year: 2000, Capacity approx. 10,000 bph, Siemens S7, 1.0 liter pocket cell, currently used for 330 ml + 500 ml. Bottle diameter 50 - 90 mm / Bottle hight: 110 - 330 mm.

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5)

Table dimensions: 320 x 320 mm Working length: up to 500 mm Reference: Hercegfi - Lot 76

Consisting of: (1x) table drilling machine, (1x) mixing machine, (4x) electric motors, various machine parts, workshop chairs, party tent, etc.

Jaw width: 125 mm Reference: Zabyx - Lot 58

Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost  ...

Dough dividing and warp knitting machine WP Rotamat CN 30 pieces -30 pieces -for dividing and rounding doughs -Weight range per dough piece from 30grams to 70grams -Dough insert up to a maximum of 2100gr. -with plastic knife -Dimensions 62x53x140 WxDxH -including 3 knitting plates

Rego SM3 stop and stirring machine Stop and mixer Rego SM3 -for max. 30 liters -with automatic run via timer -manual run -stirring and beating

Decoiler D = 1000

Pipe bender - Power 3/8" to 2" pipe - Tools for 3/8" - Incl. base frame see pictures

Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts

The thickness of the bread slice is 15 mm; Slicing speed: up to 70 pieces per minute; easily replaceable blade system

40 bar IKZ filter system For DMG machines

Stud welding machines 2 pcs. technical data see pictures

Jaw width: 160 mm Reference: Osthoff - Lot 39

MMG MLL-1 filling machine 2019, built entirely in 316 stainless, doses all kinds of fluids both viscous and dense, you can adjust the volume of the dosing by means of a screen and work with auto activation, being able to regulate the rate or frequency of dosing. Product reception jacketed hopper which can be used to heat or cool the product, electric panel with PLC and anti drip system. Doses from 100g - 1000Kg. Piston works with a servo-motor. Hopper also has agitation for faster filling

Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg

Machine is equipped with: - Footswitch Sheet thickness 2.0 mm Projection 280 mm Roll diameter 78mm Total power requirement 1.5 kW Machine weight approx. 350 kg Space requirement approx. 1.2 x 0.8 x 1.3 m

Dough Kneader Spiral Kneader Diosna SP 120 F -Type: SP 120 F -with membrane keypad -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor - 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -Weight of the machine approx. 550 kg -Condition "good"

Mobile;

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

2-roller banding machine drinking flax ZW 400; cleaned and tested; Working width 400mm; Glue basin height adjustable; suitable for cold glue; 2 pcs. in stock. Two rollers gluing machine potions ZW 400; cleaned and checked; working width 400mm; glue reservoir adjustable in hight; used for cold glue; two machines on stock.

Fiber Laser Machine HLF1530 8KW - IMMEDIATELY AVAILABLE high-quality equipment Laser power: 8kW - VA up to 20mm, FE up to 30mm Sheet size: 3000 x 1500mm Equipment: Precitec Auto Focus Procutter Cutting Head IPG resonator with 8kW incl. German ! On-site warranty THK Guided Tours fast, automatic changing table Sheet metal layer detection automatic nozzle cleaning Siemens touchscreen control with LAN/USB Siemens Drives CE safety by TÜV Süd Sick light barriers around the changing table Will include: Warranty CAD CAM Software Commissioning Delivery within Germany Training offered We have been servicing YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine at any time with us under power. Come and visit us !

Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm

Column drill with: ARBO/CE approved protective cover. Quick-release chuck with pin. Tilting work table. Deep stop. Ejection wedge. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 290 x 270 mm Column diameter 92 mm Speed 150 - 2450 rpm Total power requirement 1.1 kW Machine weight approx. 95 kg Dimensions L-W-H 0.66 x 0.8 x 1.7 m Condition: never used / new (5)

Unused

Belt and internal grinding machine, oscillating, with several grinding inserts. Condition: never used / new (5)

Serial Number: 144669 Operating Voltage: 100 - 240 V Connection: 800 W Frequency: 50/60 Hz Reference: CES - Lot 15

Profile bending machine with: - Foot pedal right/counterclockwise rotation - 1 set of standard rollers - All 2 rollers are driven - Working horizontally or vertically Round material solid 35 (800) mm Square material solid 35 (1200) mm Angle steel 50 x 50 x5 (850) mm Flat steel 60 x 10 (800) mm Axle diameter 50 mm Working speed 4.5 m/min Roller diameter - tools 155 mm Total power requirement 1.5 kW Machine weight approx. 0.9 kg Space requirement approx. 0.6 x 0.9 x 1.35 m

Key data: 4 , 220 , 120

Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.

Equipped with 12500 W; 5m; Maximum power 120A; Unused in box

cap. Ø27 mm in 7 mm steel or Ø 16 mm in 12 mm steel; Discharge approx. 175 mm

Zoller V520B Magnum Setting and Gauge Manufacturer: Zoller Type: V 520 Magnum Year of construction 1998 Specifications: Voltage 230 V Compressed air 4-6 bar Weight 180kg Under table 140kg Maximum tool weights Manual focusing max. 1000 N Automatic focusing max. 200 N More items - new and used - can be found in our shop! International shipping costs on request!

Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;