sanding line used for sale

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband<CRLF>1 Bürste<CRLF>1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

Manufacturer: Arminius Kantenschleifmaschine, Type: SP 33, Year: ca.1993, Monting of the machine: Bürste/längs/längs/radius oben, Sanding belt hight: ca.50, Sanding belt length max mm: 2150 X 50, Work piece hight min-max mm: 8-50, Work piece width min-max mm: 75, Feeding speed min-max m/min: 5-15, Length of the machine mm: ca.4500, 1st sanding motor controlled and tiltable: Bürste, Frequency controlled: regelbar, Power kW: 0,75, 2nd sanding motor controlled and tiltable: yes, Frequency controlled: regelbar, Power kW: 0,75, 3rd sanding motor controlled and tiltable: yes, Frequency controlled: regelbar, Power kW: 0,75, Frequency controlled: regelbar, Power kW: 0,75, Belt clamping pneumatically: yes, Hight adjustment by hand wheel: yes, radius sanding device: oben, Oscillation: yes, Hight adjustment: yes, Year :ca.1993

RB R83 vertical grinder Power motor 2.2kw Two speeds of sanding belt Sanding belt rotation right and left Sanding belt width 40mm Sanding belt length 1700mm Year of manufacture 2008 Weight 104kg Technical documentation Net price

• Lot of 2 electronic sectioned sanding pads with 56 sectors for wide belt sander • Dimensions of each unit: approx, 1600 x 150 x 260 mm • Sanding pad length  approx, 1500 mm • They include the control cards that appear in the photographs • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-199

• Electronic sectioned sanding pad with 56 sectors for wide belt sander • Dimensions of the unit: approx, 1600 x 150 x 260 mm • Sanding pad length approx, 1500 mm • It includes 2 control cards that appear in the photographs • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-204

• Wide belt sanding machine • Serial number SA/003937 • Sanding width approx, 1350 mm • Workpiece thickness from 4 mm up to 170 mm • Vacuum transport belt, F,LLI FERRARI vacuum unit power 11 KW • Belt conveyor with variable feed speed • Feed motor power 4 KW • Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW • Aggregate 2: EPICS K-RP 46 combined roller and sanding pad aggregate: roller diameter 220 mm, 46 sectors,sanding belt dimensions 2620 x 1370 mm, motor power 18,50 KW, with blowers • Aggregate 3: EPICS PE-46 electronic sectioned sanding pad: 46 sectors, sanding belt dimensions 2620 x 1370 mm, motor power 15 KW, with blowers • Aggregate 4: brush unit • HYDRA RTC electronic management control, Windows environment • Operating con ...

- Total installed power 250 KW. - Motorized height positioning. - Transport table with vacuum, 15 KW depressor. - Variable feed speed from 5 m/min to 25 m/min. - 11 KW advance motor. - Workpiece detection device: provides the machine control system with information about the shape and size of the workpieces to be processed as well as their position on the conveyor belt. - Group 1: grooved steel gauging roller, 55 KW motor. - Group 2: grooved steel gauging roller, 55 KW motor. - Group 3: grooved steel gauging roller, 55 KW motor. - Group 4: longitudinal sanding unit with CSD pressure system, belt dimensions 2620 x 1350 mm, 16.50 KW motor. - Group 5: longitudinal sanding unit with CSD pressure system, belt dimensions 2620 x 1350 mm, 16.50 KW motor. - Group 6: cleaning brush, 1.50 KW motor. - PC Control with touch screen. - Operating conditions of this machine: unchecked. -  ...

TECHNICAL DATA: Sanding belt length: 2800 mm Installed power: 2 hp

GALLI drawer grinding machine RCG model with 2 belts: - 1 fixed belt, with external side support surface - 1 belt with adjustable opening Machine not CE compliant, for export

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Suction inlet diameter 100 mm Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

Profile grinding machine Brand Ecoline Type: Profilsand 6 New machine The customized solution for sanding individual parts such as for window profiles or moldings. Flexibility also in the choice of material and surface to be sanded: The Profilsand 6 can process different surfaces (impregnated, primed...) and types of wood (solid wood, veneered parts, MDF, etc.). The machine is equipped according to your specifications. Basic machine - Machine bed made of steel frame to ensure high stability. - Ground and therefore absolutely flat surface of the machine bed. - All movements of the aggregates are carried out on linear guides with recirculating ball bearings to ensure durability, precision and strength. - Feed via a driven conveyor belt. - Adjustable support rollers for supporting the parts between the lower units - Pressure rollers are positioned at the top alo ...

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.

Used pastry machine CANOL, type: CA-L -in bakery condition- - Dough preparation CA-L (built in 2001) - Calibration unit TS/0 (built in 2002) -Longitudinal section -Guillotine - Incl. many cutting tools (cutting rollers) - incl. band C/L (built in 2001) The system was still in use until recently and works without any problems. Visits and test runs are possible by arrangement.

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: THK, 4 pieces guide rails with 8 pieces guide carriages/slides -Guide carriage: Type SR -Rail length: 410/340 mm -Rail width: 23 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 410/100/50 mm -Weight: 6.7 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Geze, electric linear drive type E212R/230V-AC Ovp -Ident.-No.: 05428 -Stroke length: 42-66 mm -Network: 230 V DC -Shaft: Ø 20 mm -Number: 1x linear drive available -Dimensions box: 230/100/H50 mm -Weight: 1.0 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 20mm long version -Bolt circle: Ø 43x6 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 54 x 80 mm -Weight: 0.2 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 16mm long version -Bolt circle: Ø 35x5 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 46 x 68 mm -Weight: 0.1 kg/piece

SALE ONLY OUTSIDE GERMANY. Complete production line, consisting of: LAWECO Lift OEST glue mixing plant BÜRKLE CBM1400 - Brushing machine BÜRKLE DAK1300 - Glue Applying Machine KRAFT Disc Conveyor KRAFT Paper Coater SERGIANI LAS230 - 10ET Press Bonding Station Pruning station Laying station Stacking Auction-ID: A1-45406-10

Pastry Line Refurbishment Line Rondo Jumbolino SPF 610 C Year of Make: 2002 Condition: functional Incl. cutting rollers, folding shoes, accessories, etc. Double cutting station Residual dough/waste marker with collection container Sprayer Pneumatic Filling Device Spreading device Roll-up Guillotine Belt travel direction left Belt width approx. 640 mm Total length approx. 8250 mm 

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

STRIP THICKNESS: 0.5-5 MM, SHHET LENGTH: 2 - 4 M,

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

RAIL LENGTH: 5 - 60 M, CONTINUOUS MEASURING, 6 LASER MEASURING HEADS, SPEED: 1 M/SEC., MODERNISED IN 1992

SACMI line for crown corks.

Type: Jumbo KODUKO 16-500 / DF510 / SKM103-03 Capacity: 2500 kg / h Cooking time: 120 min Type: Schroder DF510 Hopper diameter: 600 mm Hopper lenght: 520 mm Power: 0.12 kW Type: Schroder SKM103 Dimension: 2500 x 3375 x 2510

Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

SACMI rotary compression line for plastic caps 38 mm. with control video system.

An entire line for sale

Liners Wear less than 0.05

Used line to grind, capacity 300-600kg / h. (depending on the product) The line is equipped with: - Mill REKORD - Cyclone Filter - Centrifugal fan for air transport.

ULTRASONIC INSPECTION - TESTQMATIC - TYPE: SPA-2N, L=5-60 M, 1 M/SEC., 1988 EDDY CURRENT INSPECTION - MPA - 1989 RAIL PROFIL MEASURING DEVICE - SCHMITZ & SÖHNE AND BSB - 1989 PRODUCT HEIGHT: 95-165 MM, HARDWARE & SOFTWARE