sand used for sale

Serial Number: 5085 Weight: 200 kg Power: 1,1 kW Length mm: 1000 Width mm: 900 Height mm: 1800 Working height: 90 cm Min.-max. glass thickness: 2- 8 mm Min.-max glass size: Min. 100x100 - < Number of brushes: 1 Condition machine : Used Control type: Manual Electric. Connection: 16A Missing parts: None Electric diagram: Photos and video available

1.5 KW, 400 V, 50 Hz, Oscillatation, Abrasive belt 150x2515 mm, Height-adjustable table 840x300 mm, Side table for curves 250x300 mm, Swivel up to 90°, angle stop, Extraction connection 100 mm, Weight 146 kg

Sanding plant, coating plant used Manufacturer: unknown Type: Sanding width approx. 1500 mm 380 V Total dimensions approx. : 3250 x 2250 x 3000 mm The plant was used for sanding Eternit panels. Changes and errors in the technical data, specifications and prices as well as prior sale

car. Edge profile grinding machine Langzauner LZK-SD Machine from a small craft business Joinery dissolution due to retirement ex location net € 6.000,00 as seen

Grinding machine for curved elements OMAB/Comec Working width 200mm Sanding belt oscillation Pneumatic pressure of the material Main Motor 5.5kw Feed motor 0.25kw Extraction spigots 2x100mm Machine dimensions 210x80x150cmH Weight 450kg

Samco Unilev 15 edge sander Tape dimensions 150 x 2170 mm Two belt speeds Adjustable Boot Table top adjustable at 0-30 degrees Adjustable sanding height Pneumatic tensioning of the sanding belt Sanding belt oscillation Motor power 3kw

Grote AC60M LH sandwich cutter Serial: 1204501 2020, Stainless sandwich cutter, belt dimensions 2600mm x 160mm, variable speed main belt and top hold down belt, cuts any sandwich in half accurately and cleanly using a mechanical blade, up to 60 sandwich per minute, mobile, 3Ph

PROMAC Combination Belt Sander 322BE1 Motor 0.7 kW, 400 Volt Grinding wheel 200 x 25 x 20 mm Speed 2850 rpm Buffing disc Abrasive belt 100 x 1000 mm Belt speed 16 m/sec. Grinding surface 105 x 250 mm Dimensions 500 x 280 x 630 mm Weight approx. 28 kg

Model : 41-SERIE-1350-WRDW Weight of Machine Parts - Machine: Approx. 7,000 kg - Conveyor table: Approx. 1,050 kg (without motor) - First contact rollers: Approx. 160 kg - Tension roll: Approx. 75 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

from training workshop - public institution used, top condition, little used make Johannsen type T 94 year of manufacture 1996 machine no.No. 21397 GS wood dust tested sanding length approx. 2600 mm sanding width approx. 850 mm belt length approx. 7800 mm x 150 mm cranking right approx. 550 mm electric adjustment upper belt cover upper sanding support belt speeds 22 m/sec. right-left run suction connection D 180 mm left space requirement approx. 2200 mm x 4050 mm weight approx. 700 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty

Sand Drainage Manufacturer: CDE Type: Hydrocyclone Year of Make: 2021 Operating hours 428 h Drive: Electric Location: NRW Price from location:

Sandblaster GLASNER Working is OK Equipped with one filter Voltage: 380 V Internal dimensions: Width 590 mm x Depth 470 mm x H 400 mm Width: 1000 mm Depth: 1500 mm Total height: 1800 mm Weight: approx 400 kg

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Sanding machine Brand: Ecoline Type: Windsand 4 New machine for sanding panels and glued frames. Technical data: Dimensions workpieces: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shaft: 7 pcs. Power: 12 kW Air pressure: 6-8 bar Suction studs: 5 x Ø120mm Suction power: 6000m³/h Units 2 verticale swivable brushes (left / right), Ø 350 mm, for sanding the outer sides of the panels and window frames. Power of both brushes 0,55 kW 1 Deep brush, Ø 240 mm, for sanding the inner verticale sides and front sides of window frames. Power 0,55 kW 1 upper sanding lamella roller for surfaces, Ø 420 mm; length 1600 mm. Power 3 kW 3 upper sanding discs, Ø 400 mm, for the perfect crosswise process of the the lengthwise and crosswise positioned wood fibres. Power of each disc 1,5 kW; All tools are frequency controlled. Al ...

Profile sanding unit IMA Type: 08.063

Sanding unit IMA Type: 08.062 - oscillating

Sanding units Make: Heesemann Type: M2

Sanding unit Make: HOMAG Type: PS10

Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

Manufacturer: Bütfering AWS, Type: AWS 1100, Year: 1981, Monting of the machine: Kombiaggregat, Sanding width mm: 1100, Sanding hight mm: 120, Sanding belt dimensions: 1900 X 1150, Längsschleifaggregate: Kombi/Bürste, Band 1 Leistung kW : ca.10, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 0,5, Constant table hight: no, Year :1981

Manufacturer: Heesemann, Type: UKP 20, Year: 1990, Control: Programm, Program: yes, Axis control: yes, Work piece width min-max mm: 3, Min.-max. workpiece height in mm: 3, Sanding hight mm: yes, Schleifaggregate links : yes, Schleifaggregate rechts : 2300 , Transverse sanding units: 80, Abrasive belts at bottom: 120, Surface sanding units: 250, Year :1990

Manufacturer: Heesemann, Type: LSM 8, Year: 2005, Sanding width mm: 1300, Sanding hight mm: 3-80, Sanding belt dimensions: 2620x1350, Konstantentisch: yes, Längsschleifaggregate: 1, Band 1 Leistung kW : 18,5, Band 1 Schleifbandgeschwindigkeit m/s : 0,5-20, Continous adjustable feeding speed m/min: 13-65, Transportbandantrieb kW: 7,5, Vacuum table: 5,5 kW, Brushing unit: 150 mm - 1,5 kW, Weight in kg: 6.500, Year :2005

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

Manufacturer: Delle Vedove, Type: Profilleistenschleifmaschine, Monting of the machine: 8 Schleifaggregate, Program: yes, Axis control: yes, Work piece width min-max mm: 10-250, Min.-max. workpiece height in mm: 6-80, Work piece length min-max mm: 300, Sanding width mm: 2500, Sanding hight mm: 80, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Surface sanding units: 2, Profile sanding units: 6, Monting of the machine: 8 Schleifaggregate,

Manufacturer: Heesemann Lackschleifmaschine, Type: LSM 8, Year: 2002, Control: Heesemann, Monting of the machine: Längs/längs/Bürste /Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Sanding belt dimensions: 2620 X 1350, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 2 Leistung kW : 13/17, Transportbandantrieb kW: ca.4,0, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: 2, Year :2002

Manufacturer: Heesemann , Type: LSM 8 mit EA Entstaubung, Year: 2002, Monting of the machine: Walze/Quer/lang/lang/Lang/3 X Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1300, Steel roller: 1, Transverse sanding units: 1, Längsschleifaggregate: 4, Bürstenaggregate: 3, Band 1 Leistung kW : ca.35, Belt 1 shoe unit: yes, Band 2 Leistung kW : 17, Band 3 Leistung kW : 17, Band 4 Leistung kW : 17, Struckturieraggregat: Möglich, Vacuum table: yes, Year :2002

Manufacturer: DMC, Type: Unisand K USK 1350 M3, Year: 2011, Software: DMC, Monting of the machine: Walze/Walze/Schuh, Sanding width mm: 1350, Number of sanding belts: 3, Rubber roller: 2, Längsschleifaggregate: 3, Weight in kg: 5350, Year :2011

Manufacturer: MB Maschinenbau, Type: ROBA-Simplex, Year: 2010, Control: yes, Monting of the machine: Schleiflamelle, Control: yes, Sanding belt hight: 100 mm, Table length: 1800 mm, Slewable sanding head: no, Sanding belt width max mm: 100, Work piece hight min-max mm: 80, Schleifbandgeschwindigkeit min-max m/sec: Frequenz, Bandantriebsmotor kW: ca.4, Oszillation mm: yes, Hight adjustment by hand wheel: yes, FREE TEXT: Luftpolsterkissentisch, Year :2010

Manufacturer: Ernst, Type: 830 J-2, Monting of the machine: quer / längs / längs, Sanding width mm: 1380, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 5.400 x 150 + 3.150 x 1.400, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 15, Band 2 Leistung kW : 30, Band 3 Leistung kW : 37, Continous adjustable feeding speed m/min: 12 - 36, Intermediate sanding of lacquer: no, Constant table hight: ca 880, Vacuum table: 7,5, Brushing unit: 1,1, Weight in kg: 7.400,

Manufacturer: KBM Kantenschleifmaschine, Type: KBM 3200, Year: 2013, Control: hand, Control: hand, Roller diameter D mm: ca.120, Table stop mm: ca.900, Sanding area (beam): yes, Sanding belt width max mm: 150, Sanding belt length max mm: ca.3200, Sanding unit slewable up to 45°: yes, Schleifbandgeschwindigkeit min-max m/sec: 2 Stufig, Sanding belt dimensions mm: ca 3200 X 150, Bandantriebsmotor kW: 2,2, Oszillation mm: ca.20, Year :2013

Manufacturer: Heesemann, Type: Hochglanzpolierautomat BA 2, Year: 1989, Belt length mm: ca.9500, Sanding hight mm: ca.200, Table width mm: 1350, Table length: 2530, Sanding belt engine kW: 11/15, Fan for chips: yes, 2 rotary directions: yes, Stop straightedge: yes, Presentation possible: yes, FREE TEXT: Saugspann Anlage/Bandstrahleinrichtung/ Frequenzregelung Schleifband/Schaltschrank Neu, Year :1989

Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999

Manufacturer: Viet, Type: Valleria Challenge 333TM, Year: 2000, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Year :2000

Manufacturer: Viet, Type: Valeria Challenge 223 TM, Year: 2000, Monting of the machine: Längs/Längs, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Weight in kg: 3450, Year :2000

Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: Viet Lackschleifmaschine, Type: Valeria, Year: 1996, Control: Viett, Monting of the machine: Walze, Sanding width mm: 1300, Sanding hight mm: 6-120, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Rollers: 1, Shore roller 1: 30, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-18, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Werkstück-Abstrahleinrichtung: yes, Year :1996

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987

Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985

Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007

Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005

Manufacturer: Heesemann, Type: FGA 6, Year: 1989, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989

Manufacturer: Venyeskob, Type: Bürste, Year: 1991, Work piece width min-max mm: 10 - 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 8 - 60, Working widht max mm: 300, Number of brushes: 6, Brushes straight: 4, Brushes inclinedt: 2, Diameter of brushes: 150, Power per brush kW: 0,8, Feeding speed min-max m/min: 10 - 60, Year :1991

Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991

Manufacturer: Heesemann, Type: FGA 6, Year: 1990, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: 40, Power belt 1 in kW: 11, Constant table hight: 950, Vacuum table: yes, Pressure pads for short workpieces: yes, Brushing unit: yes, Year :1990

Manufacturer: Heesemann, Type: Profilklotzeinschleifgerät PWST, Bauyeshr : 1994, Control: hand, Sanding belt hight: 80, Tischlänge mm : 800, Work piece hight min - max mm: 80, Control panel on top: yes, radius sanding device: yes, Profilwerkzeug-Formschleifmaschine PWS-T für das massgenaue Schleifen der Konturen vorgearbeiteter Profilwerkzeuge, bestehend aus über Getriebemotor oszillierend, Profilwerkzeuge auf Kreissegment schwenkbar gelagert. , Year :1994