sand used for sale

SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)

230x80mm Auction-ID: A1-41275-625

SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - rubber roller - 18.5 kw - 90 sh - diam. 250 mm - rubber roller - 15.0 kw - 70 sh - diam. 250 mm. - rubber roller - 11.1 kw - 40 sh - diam. 330 mm - n. 3 indipendent motors - working width 1100 mm - device for short pieces - year 2005

Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...

SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA - transversal sanding on two sides of straight or shaped / curved elements - n. 2 motors for abrasive belts 7.5 hp each - n. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

230x80mm Auction-ID: A1-41275-439

Condition Used Stock Number 3350P Tetra Pak Laval Hoyer extrusion line Type ARB.BORD IND Tetra Pak Laval Hoyer extrusion line Serial number 348-5214 Tetra Pak Laval Hoyer extrusion line Year of construction 1998 Tetra Pak Laval Hoyer extrusion line Capacity 27000 sandwiches/hr Tetra Laval Food Hoyer spiral freezer Type ST LINE 1100 Tetra Laval Food Hoyer spiral freezer Serial number 348-1023 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Laval Food Hoyer spiral freezer Refrigerant NH3, Ammonia Tetra Laval Food Hoyer spiral freezer Evaporator 2 pc. Retech GLS 50-18-280 Tetra Laval Food Hoyer spiral freezer Tetra Pak Laval Hoyer dip and transfer unit 12 lane Tetra Laval Food Hoyer spiral freezer Type HOYWRAP MW1200-6 Tetra Laval Food Hoyer spiral freezer Serial number Z415.3872 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Pak H ...

Includes PDA180E sander Auction-ID: A1-45424-119

Good condition Auction-ID: A7-45427-133

Chassis number: 5084 Weight: 0,25 tons Power: 1,3 kw Length mm: 1000 Width mm: 1000 Height mm: 1800 Working height: 90 cm Transport size L x W x H: 1,0 x 1,0 x 1,8 Condition machine : Used Control type: Manually Electric. Connection: 16A 5P Photos/film available: Photos available Remaining: Originally it is a Quaranta

Galli LVG 120 edge sander Grinding height 240mm Work surface length 1200mm Sanding unit tilting at an angle of -20/+20° Mechanical Oscillation 4kw main motor

Various shapes and sizes Auction-ID: A1-45188-281

Serial Number: 5085 Weight: 200 kg Power: 1,1 kW Length mm: 1000 Width mm: 900 Height mm: 1800 Working height: 90 cm Min.-max. glass thickness: 2- 8 mm Min.-max glass size: Min. 100x100 - < Number of brushes: 1 Condition machine : Used Control type: Manual Electric. Connection: 16A Missing parts: None Electric diagram: Photos and video available

1.5 KW, 400 V, 50 Hz, Oscillatation, Abrasive belt 150x2515 mm, Height-adjustable table 840x300 mm, Side table for curves 250x300 mm, Swivel up to 90°, angle stop, Extraction connection 100 mm, Weight 146 kg

Sanding plant, coating plant used Manufacturer: unknown Type: Sanding width approx. 1500 mm 380 V Total dimensions approx. : 3250 x 2250 x 3000 mm The plant was used for sanding Eternit panels. Changes and errors in the technical data, specifications and prices as well as prior sale

Grinding machine for curved elements OMAB/Comec Working width 200mm Sanding belt oscillation Pneumatic pressure of the material Main Motor 5.5kw Feed motor 0.25kw Extraction spigots 2x100mm Machine dimensions 210x80x150cmH Weight 450kg

car. Edge profile grinding machine Langzauner LZK-SD Machine from a small craft business Joinery dissolution due to retirement ex location net € 6.000,00 as seen

Demo model

Sanding belt 1180x75 mm;

Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

In 2 boxes, unused

Equipped with 2016 Sewing mobile feed belt 300cm, belt width: 135cm, Sewing conveyor system mobile 3 pieces with bend. Sewing conveyor belt straight: 485x80cm, sewing chain conveyor bend 80cm, total width 388cm, alignment belt 135x100cm. Extra sanding belts and brushes available. Motors on pallet and parts in crate

125 mm

Samco Unilev 15 edge sander Tape dimensions 150 x 2170 mm Two belt speeds Adjustable Boot Table top adjustable at 0-30 degrees Adjustable sanding height Pneumatic tensioning of the sanding belt Sanding belt oscillation Motor power 3kw

Grote AC60M LH sandwich cutter Serial: 1204501 2020, Stainless sandwich cutter, belt dimensions 2600mm x 160mm, variable speed main belt and top hold down belt, cuts any sandwich in half accurately and cleanly using a mechanical blade, up to 60 sandwich per minute, mobile, 3Ph

PROMAC Combination Belt Sander 322BE1 Motor 0.7 kW, 400 Volt Grinding wheel 200 x 25 x 20 mm Speed 2850 rpm Buffing disc Abrasive belt 100 x 1000 mm Belt speed 16 m/sec. Grinding surface 105 x 250 mm Dimensions 500 x 280 x 630 mm Weight approx. 28 kg

Qty. 1 Second-hand (PUR/PIR) sandwich panel Mfc.: PIR/PUR Firing System & Profiling Press Line – Siempelkamp GmbH Terminal System – IL Kwang Metal Built: 2016 Type for sandwich panel: Outer side – Color coated steel strip Inner side – Hard Polyurethane / Polyisocyanate Use for: Construction Panel for Wall & Roof Product size: 14.0 m x 1.22 m – L x W Thickness: 50 mm, 75 mm & 100 mm Upper & lower steel strip: 1220 x 0.45 – 0.75 mm – W x T Coil weight: 10 T

Model : 41-SERIE-1350-WRDW Weight of Machine Parts - Machine: Approx. 7,000 kg - Conveyor table: Approx. 1,050 kg (without motor) - First contact rollers: Approx. 160 kg - Tension roll: Approx. 75 kg Find more here - / Contact us at -

from training workshop - public institution used, top condition, little used make Johannsen type T 94 year of manufacture 1996 machine no.No. 21397 GS wood dust tested sanding length approx. 2600 mm sanding width approx. 850 mm belt length approx. 7800 mm x 150 mm cranking right approx. 550 mm electric adjustment upper belt cover upper sanding support belt speeds 22 m/sec. right-left run suction connection D 180 mm left space requirement approx. 2200 mm x 4050 mm weight approx. 700 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty

Sand Drainage Manufacturer: CDE Type: Hydrocyclone Year of Make: 2021 Operating hours 428 h Drive: Electric Location: NRW Price from location:

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -

Sandblaster GLASNER Working is OK Equipped with one filter Voltage: 380 V Internal dimensions: Width 590 mm x Depth 470 mm x H 400 mm Width: 1000 mm Depth: 1500 mm Total height: 1800 mm Weight: approx 400 kg

Sanding machine Brand: Ecoline Type: Windsand 4 New machine for sanding panels and glued frames. Technical data: Dimensions workpieces: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shaft: 7 pcs. Power: 12 kW Air pressure: 6-8 bar Suction studs: 5 x Ø120mm Suction power: 6000m³/h Units 2 verticale swivable brushes (left / right), Ø 350 mm, for sanding the outer sides of the panels and window frames. Power of both brushes 0,55 kW 1 Deep brush, Ø 240 mm, for sanding the inner verticale sides and front sides of window frames. Power 0,55 kW 1 upper sanding lamella roller for surfaces, Ø 420 mm; length 1600 mm. Power 3 kW 3 upper sanding discs, Ø 400 mm, for the perfect crosswise process of the the lengthwise and crosswise positioned wood fibres. Power of each disc 1,5 kW; All tools are frequency controlled. Al ...

Qty. 1 Second-hand sandwich panel production line Line manufacturing of insulated metal panels for sectional doors (garage). Mfc.: METECNO Technology SPA; FASPAR Built: 1994 Reconditioned and commissioning: 2006 Useful working width: 500/610 - 10 mm Panel door thickness: 40 mm Sheet thickness: 0.37/0.70 mm Capacity: 1,500,000 m panels/year