sand used for sale

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sander Vario Master 9480 strapping machine Manufacturer: Sander  Type: Vario Master  Model: 9480  Type: Vertical Strapping Machine  Operating voltage: 400 V Power: 2 kW Control voltage: 24 V

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207629 Diameter: Ø 12.25 mm 420279013 K20 Holder: Ø 32 mm New ! Dimensions: 170 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207628 Diameter: Ø 10.25 mm 420279012 K20 Holder: Ø 32 mm New ! Dimensions: 160 x 32 x 32 mm

The machine is in very good condition Year of construction 2008 Max. Duty 40mm Capacity: approx. 10-50 to./h Weight is 6.3 tons Dimensions: 3.5 x 2.02 x 2.21m

Sheeter for foil / sleeve Manufacturer: Sandmann Working range width = 16 -350 mm, Length = 10 -1000 mm, Speed up to 50 m/min 

SANDRETTO série 9 1300/3000 Force de serrage : 300 T - 3000 KN Distance entre les barres d'attache : 570 X 570 mm Dimension du plateau : 860 X 860 mm Epaisseur du moule min / max : 210 - 730 mm Ouverture du moule : 630 mm Volume injectable : 658 cm3 Pression sur le matériau : 1985 bars Diamètre de la vis : 55 mm Puissance totale de la machine : 53,7 KW Rapport L/D : 20 Poids : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m

Swivel arm punch Sandt, in good condition, immediately available Robsvvhfuer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Key data: 3500 , 70

SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg

Bridge punch from Sandt with 30t

Description SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Clamping force : 40 T Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table 1 core pull 4 heating zone

Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Technical Specifications Overall dimensions (L × W × H): approx. 4400 × 2400 × 2450 mm Weight: approx. 2000 kg Connected load: 6 kW Main power protection: 20 A Rated voltage: 400 V, 50 Hz, 3P/PE Control voltage: 24 V DC Protection standard: EN 60204 Compressed air pressure (pneumatics): 6.0 bar Compressed air consumption: 0.1 Nm³/h Dust extraction capacity: 3391 m³/h Air speed: 30 m/s Effective working width: 2700 mm Sanding belt size: 100 × 8340 mm Maximum workpiece weight on machine: max. 50 kg (depending on size, number of vacuum clamps, and machining position) Maximum workpiece weight on infeed table: max. 100 kg (flat position) Mounting drawing number: ENG-026696 --------------------------------------------------------------- Environmental Condi ...

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie bar : 510 X 510 mm Platen dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Injection pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage

Brand & Model: SANDRETTO Serie NS - 230 T Reference: NS 860/2300 Condition: Very good Technical Specifications: Clamping force: 230 T / 2300 KN Tie bar spacing: 585 x 585 mm Platen dimensions: 860 x 860 mm Mold thickness (Min/Max): 210 - 630 mm Opening stroke: 580 mm Injection volume: 475 cm³ Injection pressure: 1876 bar Screw diameter: 50 mm L/D ratio: 20 Dimensions & Weight: Weight: 10 500 kg

SANDRETTO serie 8 790/240 Clamping force : 200 T Distance between tie bar : 570 x 570 mm Platen dimensions : 860 x 860 mm Mould thickness min / max : 210 - 730 mm Opening strocke : 630 mm Injectable volume : 546 cm3 Pressure on material : 1450 bars Screw diameter : 55 mm Weight : 11 500 kg Dimensions : 7,68 x 2,35 x 1,78 m

Sandretto serie 8 MEGA T 1000 année 1996 Force de fermeture : 1000 T Diamètre vis d'injection : 150 mm Volume injectable : 11296 cm3 Epaisseur moule min/max : 450mm/1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1500 L Dimensions : 15,1 x 3,15 x 2,81 m

SANDRETTO serie 8 430/95 Clamping force : 95 T Distance between tie bar : 370 X 370 mm Platen dimensions : 560x 560 mm Mould thickness min / max : 100 - 460 mm Opening stroke : 410 mm Injectable volume : 286 cm3 Pressure on material : 1500 bars Screw diameter : 45 mm Weight : 5 400 kg Dimensions : 5,67 x 2,03 x 1,32 m

General SKU120X675 LocationBarneveld MakeVMA-Getzmann TypeDispermat 5 No.601-9814889 Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Floorspace0,9x0,6 M Total height1,5 M Weight175 KGPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicVMA-GetzmannIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries  ...

General SKU301W572 LocationBarneveld MakeWab Bachofen TypeKD15 Main Features MaterialStainless steel Volume15 Ltr. Motor22 KW Specified Features - Sand mill Horizontal sand millcheck Capacity15 l Housing dimensions Dia. 220 mm , length 430 mm InletDia. 30 mm OutletdIA. 30 MM Motor22 kW, 3x 500 volt MaterialStainless steel 1.4435 (316L) General No.740364 Year of construction1973 Floorspace0,75x1,00 m Total height1,60 m Weight590 kgPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndu ...

General SKU379T1136 MakeDrais LocationBarneveld TypePML-V+H Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck MaterialCeramic, Stainless steel 1.4571 (316Ti) With jacketcheck General No.54 310 Year of construction1992 With switchcheck With switchgear(as is) Floorspace1,2x0,9 m Total height0,7 m Weight340 kg ATEX designedcheck Extra Specificationsthe machine comes with many additional partsPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicDraisIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > F ...

General SKU292W971 MakeDynomill LocationBarneveld CEcheck TypeECM-pilot Main Features MaterialStainless steel Volume1.5 Ltr. Motor7.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity1,5 l Housing dimensions ø 130 x 150 mm Inletø 20 mm Outletø 20 mm With sievecheck With mechanical sealcheck With jacketcheck Motor7,5 kW, 400 V, (Ex), 1445 rpm Rotor speed2895 rpm With pumpcheck MaterialStainless steel 1.4301 (304) With jacketcheck General No.050917 Year of construction2005 With switchcheck Floorspace0,68 x 0,74 m Total height0,58 m Weight400 kg ATEX designedcheck Extra Specificationsmounted on table.cap. 10-200 l/h, cooling water consumption 800 l/hPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicDynomillIndustries > Chemical > Paints & coat ...

General SKU202U012 LocationBarneveld CEcheck MakeFryma-Maschinenbau GMBH TypeMS-18 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.1 Ltr. Motor10 KW Specified Features - Sand mill Attritorcheck Vertical sandmill:CoBall mill: Capacity1,1 Ltr. Housing dimensions Dia 200x135 mm Inlet15 mm Outlet15 mm With jacketcheck Max. temperature80 °C Motor10 kW, 400 Volt, 1465 rpm, (EX) Rotor speed1296 rpm Without ballscheck With pumpcheck Motor0,37 kW, 380-420/218-242 Volt, 1430 rpm MaterialStainless steel With jacketcheck General No.M17181 Year of construction1996 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,2x0,9 m Total height1,76 m Weight480 kg ATEX designedcheckPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionery ...

General SKU323T842 MakeNetzsch TypeLME 60 LocationBarneveld Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor55 KW Specified Features - Sand mill Horizontal sand millcheck Capacity60 ltr Housing dimensions Dia 410x1100 mm InletDia: 25 mm OutletDia: 60 mm With mechanical sealcheck With jacketcheck Motor55kW, 380 Volt, 1480 rpm (EX) Without ballscheck MaterialMild steel, Stainless steel With jacketcheck General No.204768 Year of construction1980 Mounted on framecheck With switch(as is) Floorspace2,35x1,6 mtr Total height2,3 mtr Weight2500 kg ATEX designedcheckPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillers ...

General SKU292W526 MakeNetzsch TypeLMZ 25 No.204057 Year of construction1998 LocationBarneveld Main Features MaterialStainless steel Volume25 Ltr. Motor36 KW Specified Features - Sand mill Horizontal sand millcheck Capacity25 l Housing dimensions ø 345 x 570 mm InletDN50 OutletDN500 With sieve200 µm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor36 kW (400 V, 1480 rpm (Ex)) With variable speed drivecheck MaterialStainless steel 1.4301 (304) With jacketcheck General With switchcheck Floorspace2,0 x 0,80 m Total height1,7 m Weight2300 kg ATEX designedcheckPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & filler ...

General SKU292W496 MakeNetzsch TypeLMZ25 No.204449 Year of construction1992 Mounted on framecheck Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume25 Ltr. Motor37 KW Specified Features - Sand mill Horizontal sand millcheck Capacity25 Ltr. Housing dimensions Dia. 400x600 mm InletDN25 OutletDN37 With sieve0,4 mm With mechanical sealcheck With jacketcheck Motor37 kW, 380 volt With variable speed drive500-1000 rpm With jacketcheck Sand mills Motor37 kW, 380 volt, 500-1000 rpm Specified Features - Sand mill MaterialHeat-resistant stainless steel 1.4767 General LocationBarneveld With switchcheck Floorspace1,90 x 1,00 m Total height1,85 m Weight2000 kg ATEX designedcheck Technical specs Extra informationwith cooled rotor.Paints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionery ...

General SKUR0238 MakeZoz GmbH (D) LocationBarneveld CEcheck TypeSimoloyer CM 01-2 L Main Features MaterialStainless steel Volume2 Ltr. Motor1.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity2 Ltr. Housing dimensions dia. 140x130mm Inletdia 25mm Outletdia. 25mm With jacketcheck Motor1,5 kW 230/400 Volt Rotor speed200-1500 rpm MaterialStainless steel With jacketcheck General No.4205 Year of construction1999 With switchgearcheck Floorspace1,3x0,7 M Total height1,4 M Weight400 Kg Extra Specificationswith 3 extra houseswith 5 extra rotorsvarious spare partsPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicZozIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustri ...

General SKU292W497 MakeNetzsch TypeLMZ60 No.204.710 Year of construction1993 Mounted on framecheck Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume62 Ltr. Motor70 KW Specified Features - Sand mill Horizontal sand millcheck Capacity62 Ltr. Housing dimensions Dia. 460x710 mm InletDN25 OutletDN50 With sieve0,6 mm With mechanical sealcheck With jacketcheck Motor70 kW, 380 volt, 450 rpm Rotor speed450 rpm Without ballscheck MaterialHeat-resistant stainless steel 1.4767, Stainless steel With jacketcheck General LocationBarneveld With switchcheck Floorspace2,20 x 1,00 m Total height2,20 m Weight3500 kg ATEX designedcheck Extra SpecificationsCooling on sievePaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Pa ...

General SKU292W495 MakeNetzsch LocationBarneveld TypeLMZ60 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume62 Ltr. Motor70 KW Specified Features - Sand mill Horizontal sand millcheck Capacity62 l Housing dimensions Dia. 460 x 710 mm InletDN25 OutletDN50 With sieve0,3 mm With mechanical sealcheck With jacketcheck Motor70 kW (400 V, 450 rpm (Ex)) Rotor speed450 rpm Without ballscheck MaterialHeat-resistant stainless steel 1.4767 With jacketcheck General No.204.709 Year of construction1993 Mounted on framecheck With switchcheck Floorspace2,20 x 1,00 m Total height2,20 m Weight3500 kg ATEX designedcheck Extra SpecificationsCooling on sievePaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatings ...

General SKU299U731 MakeDrais LocationBarneveld TypePM-DCP 3-45 Pressure Working pressure3 Bar Main Features MaterialChromed steel Volume12 Ltr. Motor45 KW Specified Features - Sand mill Vertical sandmillcheck Capacity12 Ltr. Housing dimensions dia. 365x400 mm Inlet25 mm Outlet19 mm With mechanical sealcheck With jacket(9+5 Ltr.) Max. temperature98 °C Motor45 kW, 380/220 Volt With variable speed drivecheck MaterialChromed steel, Stainless steel 1.4462 (318LN), Tungsten With jacketcheck General No.54238 Year of construction1991 With switchcheck Floorspace1,5x1,05 m Total height2,1 m Weight2000 kgPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicDraisIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > Food & Feed > StarchIndustries > Chemical > C ...

General SKU294T680 MakeDraiss LocationBarneveld TypePM SUPERTEX 30 Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill Horizontal sand millcheck Capacity31 Ltr. Housing dimensions dia. 240x640 mm Inletdia. 24 mm Outletdia. 24 mm With mechanical sealcheck With jacket7 Ltr. Max. temperature70 °C Motor22 kW 400 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General No.56367 Year of construction2001 Mounted on framecheck With switchas is Floorspace1,6x0,9 m Total height2 m Weight1250 kgPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicDraisIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > Food & Feed > StarchIndus ...

General SKU294T684 LocationBarneveld MakeDraiswerke TypePMH-25-TEX Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill Attritorcheck Capacity25 Ltr. Housing dimensions dia. 235x700 mm InletDN25 OutletDN25 With mechanical sealcheck With jacket10 Ltr. Max. temperature98 °C Motor22 kW 400/690 Volt Without ballscheck MaterialStainless steel With jacketcheck General No.53860 Year of construction1990 Floorspace1,7x1 m Total height1,8 m Weight1400 kgPaints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicDraisIndustries > Chemical > Paints & coatingsMills > Sand millsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent  ...

General SKU383U1043 MakeNetzsch LocationBarneveld CEcheck TypeMastermill 3 Main Features MaterialStainless steel Volume10 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmillBasket Mill Capacity9 Ltr. Housing dimensions Dia. 220x250 mm InletDia. 220 mm With sievecheck With jacketcheck Motor2,2 kW With variable speed drivefrequency converter Rotor speed1100-3000 rpm With ballscheck MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 With jacketcheck General No.2404563 Year of construction2015 With switchgear(as is) Floorspace1,2x0,9 m Total height1,2 m Weight630 kg ATEX designedcheck Extra SpecificationsDrive power mill, 2,2 kW, drive power stirrer 0,75 kW, mill speed 1100-3000 rpm, mixer speed 180-2600 rpm, basket volume 0,5 ltr,&:nbsp:Paints & coatingsSand millsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfect ...