sand used for sale

Volpato LASM edge sander Mechanical Oscillation Constant grinding speed 1.5kw motor Grinding height about 100mm Tape length 2640mm Height 130mm Extraction spigot fi 100mm

Volpato LVO 120 edge sanding machine SN 1929112 Year of construction 1999 Manufacturer: LASM Volpato Italy Small single-sided sanding centre VOLPATO offers the LVO 120 sanding machine, with a combined function that can make life easier for many professionals in the industry. It was developed under the direction of the company's experienced staff, who are passionate about achieving the best possible result. Vertical oscillating sander 2.2 kW motor (3 HP) Swivelling table 0-90 degrees Work table dim. 880 x 370 mm. Bgdyjyl27C Mechanically swivelling Additional support and ‘round’ sanding discs Belt dimensions 150 x 2580 mm. Suction device Weight 250 kg Overall dimensions: 700 x 1000 x 1150 mm. CE marking

Sanding belt dimensions 150x2250 mm Grinding table dimensions 525 x 160 mm (without plate, the plate you can see in the photos was glued on) Table dimensions on pulley 320 x 280 mm Suction nozzle Ø 100 mm Motor power 1.1 kW Connected loads 400 V, 50 Hz, 3~, 2.5 A Dimensions: 1,400 x 400 x 1150 mm

Receiver capacity: 40 l working pressure: 4 - 8 bar Air consumption: 250 - 800 l/min. weight of the machine ca.: 20 Kg : 770 x 415 x 365 mm Mobile jet unit with extraction Consisting of: microfilter Boiler 40 liters Blasting gun with 2.5m supply hose The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Receiver capacity: 2 x 37 l working pressure: 4 - 8 bar Air consumption: 170 - 500 l/min. weight of the machine ca.: 36 Kg : 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 199,5 x 67,5 x 64 mm operating pressure: 2,5 - 8,0 bar air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,23 t dimensions: 2,10 x 1,30 x 0,88 m Duo blast cabinet 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 610 mm work table:: 170x125 / 265x150 mm : 16 mm turning speeds: 2000 U/min roll diameter: 16, 23, 29, 41 und 53 mm total power requirement: 0,45 kW weight of the machine ca.: 114 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1170 x 880 x 825 mm operating pressure: 2,5 - 8,0 bar dimensions: 1,33 x 1,24 x 1,77 m air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,16 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Receiver capacity: 80 l working pressure: 4 - 8 bar Air consumption: 250 - 800 l/min. weight of the machine ca.: 36 Kg : 1020 x 460 x 520 mm Mobile jet unit with extraction Consisting of: microfilter Boiler 80 liters Blasting gun with 2.5m supply hose The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1170 x 580 x 580 mm operating pressure: 2,2 - 8,0 bar dimensions: 1,22 x 0,93 x 1,70 m air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,15 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 945 x 605 x 605 mm operating pressure: 2,2 - 5,5 bar dimensions: 1,0 x 0,61 x 1,65 m : 1300 x 1000 x 750 cm Air consumption: 250 l/min. weight of the machine ca.: 0,09 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 830 x 530 x 530 mm operating pressure: 2,2 - 5,5 bar Air consumption: 250 l/min. weight of the machine ca.: 50 Kg : 0,95 x 0,65 x ,7 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 700 mm working heigth: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: LASM Model: LS-2N1A Year of Manufacture: 2001 Type of Machine : profile sander with 2 sanding belts and one abrasive wheel station Technical Specifications: - Max workpiece thickness: 80 mm - Min workpiece length: 100 mm - Overall Dimensions: 4400 × 1400 × 1900 mm - Net Weight: 1200 kg Sanding Belt Units (x2): - Two-speed motor - Unit articulation: 135° - Belt dimensions: 80 × 2450 mm - Belt speed: 7–14 m/sec - Pneumatic belt tensioning - Mechanical oscillation - Pad movement timer (exit/return) - Air blowing system (belt cooling & cleaning) Abrasive Wheel Unit (x1): - Single-speed motor: 2 HP - Unit articulation: 180° - Max wheel diameter: 220 mm - Shaft motor diameter: 30 mm - Feed track speed: 5–25 m/min (variable) Find more here - .ucymachines/ Contact us at - sales@ucymachines

OptiGrind GU18 Double Grinder 0.45kW 230V 50Hz Grinding wheel 175mm x25mm Speed 2850 rpm G&STÜ-3101510

Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible.

width of the strips: 75.0 mm band length: 2000 mm band speed: 343.0 mm/sek grinding width: 530 Plantisch mm table height: 475 - 1240 mm total power requirement: 3.0 kW weight of the machine ca.: 100 kg range L-W-H: 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction The data for thi ...

width of the strips: 45.0 mm band length: 850 mm band speed: 8.0 m/sek. voltage: 230 V total power requirement: 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mm band length: 2000 mm band speed: 14.5 + 29 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3.0 kW 100% ED weight of the machine ca.: 67.0 kg range L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of deliv ...

through-put width: 580 mm working heigth: 615 mm discs: 570 x 260 mm Air consumption: 400 l/min. air pressure: 2,7 - 5,5 bar 0: 184 Liter 0: Luft .. 3/8 Zoll weight: 125 kg range L-W-H: ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1220 x 615 x 580 mm (LxWxH) - including sandblasting gun (grain size 0.149 - 0.250 mm can be used) - Including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 820 mm working heigth: 810 mm Air consumption: 680 l/min. air pressure: 8,6 bar : 148 Liter 0: Arm Loch 180 mm air clutch: 3/8 Zoll weight: 160 kg range L-W-H: ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1110 x 820 x 810 mm (LxWxH) - very stable construction - including sandblasting gun (usable grain size 0.149 - 0.250 mm) - including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Transport dimensions / packed: 1350 x 1000 x 1100 mm - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 1000 x 900 x 900 mm range L-W-H: 1300 x 1750 x 2200 mm weight: 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space - highly effective dedusting - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material such as B. corundum, steel sand, glass grain, glass beads, ceramic beads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions:: innen 1160 x 580 x 580 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 120 kg total power requirement: 1,2 kW weight: 115 kg range L-W-H: 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be  ...

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 400 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 220 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 200 mm band length: 1490 mm band speed: 8.0 m/sec motor: 400 Volt loading area: 500 x 280 mm total power requirement: 1.5 kW Dimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 14.5 + 29 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4.0 kW 100% ED weight: 84.0 kg range L-W-H: 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt  ...

width of the strips: 75.0 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 90.0 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with rob ...

working area L-W-H: 900 x 700 x 750 mm compressed air: 5.0 - 8.0 bar Air consumption: ca. 800 l/min. Loading: max. 50 kg voltage: 400 V total power requirement: 1.32 kW weight of the machine ca.: 700 kg range L-W-H: 1200 x 1200 x 2100 mm Current new price approx. 23.000 Euro () Special price upon request Equipment: - Industrial sandblasting system - Work area: 900 x 700 x 750 - Perforated sheet = work grate with stable support - 2 side openings with locking doors - Continuous blasting pressure adjustment - Pressure gauge - Pressure indicator - Front viewing window - 1 free-moving foot switch - Blasting gun + blasting gloves 1 extra pair included - Operating instructions (PDF) Includes special accessories: - 1 WIWOX filter and recovery system Can be installed separately next to or behind the booth Can be moved on casters with a parking brake (see Figure 9 - system lying down for tra ...

width of the strips: 150 mm band length: 2000 mm band speed: 34,0 mm/sek grinding width: 530 Plantisch mm table height: 475 - 1240 mm total power requirement: 4.0 kW weight of the machine ca.: 115 kg Furnishing : - integrated suction - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful motor 4.0 kW - suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 100 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible ext ...

Inv. Num. : 8639 Type: TZS 1-2,5/1100-N Producer: Kovo Staněk Created: 2017 Parameters: Weight: 2500 kg

An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

Edge milling machine and edge grinder Edge grinder for MDF wood 8 aggregate Its extremely precise system with pneumatic pressure means that after just one pass of the aggregates, the element is ready for priming or painting. Other offers - click - Rehnen Fmb Viet Long Belt Sander Belt Sander Brush Carousel Brush Brush Scraper Wood Scraper Cattinair Fladder Johansen Fama Heesemann Celfa Butfering Costa Lower Weber Boere Kundig Sandingmaster Stahle Levigaltecnica Rwt Steton Safo Houfek Felder Scm Sandya Unitek Vietmac Ked

Boki HY1350 municipal vehicle with snow plow and sand/salt spreader, Technical specifications:, - Registration date: 08/1994, - 3.82 m long, - Performance: 64 k, - Diesel engine, - with German approval, - All-wheel steering defective, - Oil loss from the engine, Accesories:, - with three-way tipper, - hydraulically pivoting snow blade, - German approval

Screen chute without drive for sandblasting systems, FUF, Vibra Technik, mint condition -60% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The part was purchased from a company's spare parts warehouse, has only minor signs of storage, has never been used and is completely new. - Vibra sieve chute without drive with MW5 sieve insert and GP5 silent block - 1150 x 600 mm approx. 100 kg A sieve chute is a component used in sandblasting systems to sieve blasting media. It separates larger particles from the finer grain size before the blasting media is reused and is part of the recovery system, where blasting media is collected, sieved and returned to the cycle after blasting. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the ...

Code: 0280 Brand: DIMA CEFLA Model: KLEIN/S - CE Standard Universal sanding machine for straight and curved pieces of wood, furniture, doors, frames, panels, composite materials and various - CE Standard Brush diameter 200 mm - Height adjustable shaft Sanding disc diameter 230 mm Motor 2,2 Kw Electronic speed variator Work surface dimensions 1400 x 920 mm Work surface dimensions with extensions 2200 x 1200 mm Work surface height 900 mm Suction inlet diameter 150 mm Overall dimensions mm 1600 x 1100 x 1150 h Weight kg 900

through-put width: mm working heigth: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Professional Holzprofi Maker edge belt sander with pivoting grinding device up to 90°, height adjustable cast iron table, mitre gauge adjustable at both sides, graphit band rest, rubberized grinding cylinder, cast iron table for round grinding is included in the price. Technical Data: Engine power 2,2 kW Grinding cylinder support Ø 38, 50, 76 mm Voltage 400V Table length 900 mm Table width 300 mm Table height adjustable ca. 905 - 1027 mm Band length 2770 mm Belt speed 16m/sec Weight 225kg

Holzprofi Maker oscillating edge belt sander, a solid sanding machine for craft and business Technical data: Band dimensions 2260 x 150 mm Engine power S1: 2,2 KW , 400 V Table length 750 mm Tabhle width 250 mm Belt speed 16 m/sec Space required 1325 x 570 mm Extraction connection 100 mm Weight 156 kg

This Kundig Premium-2 1100-RE belt sander was manufactured in 2007. Ideal for woodworking, it features a robust design for consistent performance. Consider the opportunity to buy this Kundig Premium-2 1100-RE belt sander. Contact us for more information.

Machine stand in torsion- and vibration-free design, extremely stable. Grinding unit adjustable up to 45 by means of a handwheel. Abrasive belt - oscillation with separate gear motor. Height-adjustable sanding table to utilize the entire bandwidth. Standard veneer edge sanding device with fine adjustment, contact shoe, relief rollers and stops. Height-adjustable additional table with suction for grinding radii. With spring-loaded strap tension.With table extension. Made in EU. Technical data:

: 600-500 mm weight of the machine ca.: 300 kg dimensions of the machine ca.: 1400 x 1100 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Orbital sander COMEC mod. LC20AV - CE rules - Adjustable feeding speed - Min/max. working diam. 30/150 mm. - Min. bending radius 200 mm. - Complete with feeding units - Year 2006

Wide belt sander DMC mod. TECHNOSAND TCK-1100 M3 - CE rules - Working width mm. 1100 - 1st unit roller 18.5 kw 90 sh diam. 250 mm. - 2nd unit roller 15 kw 70 sh diam. 250 mm. - 3rd unit roller 11 kw 40 sh diam. 330 mm. - N. 3 independent motors - Touchscreen display - Short pieces device - S/N SA/005623 - Year 2007

Top and bottom wide belt sander SAC mod. 4R 300 - CE rules - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001

This Kundig Premium 2 1100-RE belt sander was manufactured in 2007. It features a working width of 1100 mm and can handle workpiece heights from 3 to 200 mm. The machine includes a rubber roller, segmented pad with belt cleaning, and a vacuum conveyor belt. It operates at 400 V and 57.5 A, with a power of 28.4 kW. Contact us for more information about this machine.

This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4 LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine.

This SMCTL DMC SD 30 RCS 110 belt sander was manufactured in 2018. It features a working width of 1100 mm, handles workpiece thickness from 4 to 170 mm, and operates with a main motor power of 15 kW. The machine includes a 10 touchscreen control panel and requires an air pressure of 6 bar. Consider the opportunity to buy this SMCTL DMC SD 30 RCS 110 belt sander. Contact us for more information about this machine.