sand blasting used for sale

Kleencare vapour abrasive blasting machine Manufacturer: Kleencare Year of Make: 1992 Type: Vapour Abrasive Blasting Machine Working pressure: 6 bar Tank volume: 100 litres Use: Cleaning and surface treatment by wet blasting Features: Pressure blasting process with water-air mixture for gentle removal of dirt, paint and oxidation layers

Ucon vapour abrasive blasting machine Manufacturer: Ucon Year of Make: 2008 Type: Vapour Abrasive Blasting Machine Working pressure: 6 bar Tank volume: 50 litres Application: Wet blasting for cleaning, paint stripping and surface preparation Features: compact blasting machine with water-air system, suitable for sensitive materials

Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - .ucymachines/ Contact us at - sales@ucymachines

through-put width: - mm working heigth: - mm : - serial number: 2044 total power requirement: - kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Manufacturer: Rump Model: Strahlanlagen Xedura 1500 Year of Manufacture: 2017 Type of Machine : Wire belt blasting machine Condition: good to very good Maintenance: regularly, once a year Beam hours: 1,849 Total operating hours: 2,146 (approximately 200 hours per year) Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Rated power: approximately 82 kW Availability: 11/2026 Find more here - .ucymachines/ Contact us at - sales@ucymachines

internal diameter: 25 mm external diameter: 39 mm wall strength: 7 mm length in total: 33 m jet hose Unused, but shows significant signs of storage wear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jet house with screw compressor and boiler - Maintenance 1x a year Blast Chamber Size: 2500x2500mm

Rump wire belt blasting machine type Xedura 1500, good condition, serviced 1x per year

material width: max. 700 mm : : max. 1 mm : Cutting capacity structural steel: max. 1 mm Cutting capacity aluminum: max. 1 mm Cutting capacity stainless steel: max. 0,5 mm : : max. 1 mm : max. 1,5 mm weight of the machine ca.: ca. 150 kg dimensions: 1200 x 400 x 1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cabin inside about 120cm x 60cm x 50cm. Currently equipped with 8mm ceramic nozzle. Lighting converted to Led. Auction-ID: A7-49671-4

16 Bar, Includes blasting gun, cover, blast hose and case with various nozzles/accessories. Auction-ID: A1-41279-8

Cabin inside about 120cm x 60cm x 50cm. Currently equipped with 8mm ceramic nozzle. Lighting converted to Led. Auction-ID: A1-49724-4

Hour meter on the cab shows 66.2 hours of operation — very little used. Can be loaded with a forklift, it can also be dismantled together in consultation due to no more use, the machine is disposed of, fully working Auction-ID: A3-46152-11316

Soda blasting machine, Pallet with 6 salt bags, 1 bag of new gloves, Auction-ID: A1-47361-76

Max working pressure: 7 kg/cm2, compressed air consumption: 2600 L/min Equipped with: removable grates, flushing gun, 2x 60mm vortex pump in urethane, 2x 5.5kW, 3-Phase, 2 poles IP44 with overload protection, tornado generator (830L water and 250kg SBM010-015-020. Auction-ID: A1-47361-12

- Useful dimensions of the cabin: 4,000 x 4,000 x 3,260 mm. - Self-supporting construction with metal panels. - Interior equipped with metal mesh floor for abrasive recovery. - Automatic abrasive recovery system. - Cyclone separator / abrasive classifier. - Pressure tank with a capacity of 200 litres. - Bucket elevator (Ferris wheel) for abrasive recovery and return. - Includes dust suction and filtration unit with centrifugal fan. - Equipped with protected interior lighting and projection hoses. - Operating conditions of this item without checking. Auction-ID: A7-48839-58

- Belt type shot blasting machine with 2 turbines. - Crib capacity: 1.5 tons. - Especially suitable for small parts. - Includes output belt. - Crib measurements: 270 x 145 x 90 cm. - Includes 500 kg GH jib crane with 250kg capacity hoist, without control. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-23

- Machine designed for automatic shot blasting of castings, stamped parts and other hooked parts. - Maximum load per hoist: 2,000 kg. - Maximum dimensions of the pieces: Ø2,000 x 2,400 mm in height. - First theoretical shot load: 2,000 kg. - Installed power of the machine with STM separator: approx. 40 kW total - Acceptable ambient temperature: from -5 ºC to +40 ºC. - Pneumatic equipment with a operating pressure of 580 kPa. - Compressed air consumption: approx. 3 N m³/h. - Includes shot blast chamber protected with anti-wear material. - It has an overhead conveyor for handling the parts. - Incorporates a vacuum system and dust filter. - It has 4 turbines - The machine is prepared for connection to the vacuum/filter assembly. - The working system allows the rotation and translation movement of the hook for a uniform finish. - Operating conditions of this machine: unche ...

- Equipped with 1 turbine. - Skip feeding system. - Crib capacity: 2 tons. - Dimensions of the cot: 130 x 190 x 110 cm. - Automatic loading and unloading by turning the drum and vibrating screen. - Shot blasting cabin of robust construction, lined with anti-wear steel. - Dynamic separation system for removal of coarse residues and small impurities. - Centrifugal vacuum cleaner included. - Parts introduction system by skipping with double safety: light barrier and mechanical safety. - Model 400 turbine, with 8-blade rotor and shot meter. - 40 hp turbine engine at 1,500 rpm - Shot driven with an approximate impact velocity of 75 to 80 m/s. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in ...

Length 300/600 mm Width 72 mm Roughness P240/P320 Holder 4,5 mm Price 0,87 Eur/1 pcs. (300) (EXW Jonava, Lithuania) Price 1,74 Eur/1 pcs. (600) (EXW Jonava, Lithuania)

Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm 40 mm: Price 60 Eur (EXW Jonava, Lithuania) 60 mm: Price 68 Eur (EXW Jonava, Lithuania)

Besander Wiedenmann with PTO drive 540 rpm., 4-speed lawn tires 16.5x65-8" 6 PR for low ground pressure. Self-loading function by means of hydraulically tilting container when reversing. Spreading function by PTO drive. Tank volume approx. 0.75 m³, working width approx. 1.00 m. 2 hydraulic connections with control unit dw required! Simple technology - robustly built, functional. Machine in the process, details, photos and price on request! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

This device works according to the sedimentation principle and is able to separate 90% of rock particles >0.2mm at nominal water throughput. Technical data Flow rate: 100m3/h Solids discharge: 4.8dm3/h Tank volume: 2.94m3 Drive power: 0.55kW Total weight: 1473kg On transport pallets: 1 Pal. 222 x 320 x 240 cm, 789 kg 1 Pal. 105 x 670 x 70 cm, 684 kg The sand separator was always part of a test plant in the interior and was hardly used. The seller takes care of the application to the loading area suitable for trucks.

2.2 Kw. With thermal protection. Sanding belt 150 x 3200 mm. Support sheet with a point extraction, removable, large sanding roll 200 mm with extractor hood. Small sanding roll 100 mm. The sanding belt is oscillating in height. And the sanding belt is adjustable in height from 10 to 150 mm. The sanding table is made of a plane with three extraction points, all three equipped with a removable extractor hood. Three-way manifold belongs to machine. 3x extra sanding belt included Equipped with shaving hand sander, Type MB2, 380 volts, 1500 watts and a speed of 1410 rpm, Sanding belt 100 x 860 mm. With sanding table that can be swiveled away. Auction-ID: A1-48994-16

Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...

Made in 1995 in Denmark. Machine No. 9585037. Made in 1995 Transport dimensions: 1800x620x2000 mm. Weight: 400 kg

Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg

Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg

Machine Type: Core Sand Mixer Manufacturer: Baumberg Type: AMF60 Year of Make: 2010 Condition: used / in working order Offer will only be sent if a complete imprint is provided Price 1.750 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference M-BAU-0425 DESCRIPTION We offer you a used core sand mixer from the manufacturer Baumberg. Weight 480kg Flow rate 1.44 m3/h Timer would have to be renewed. But it also works that way. Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg

Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg

Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

Sandpaper, emery paper, abrasive cloth -Number: 1x item of abrasive cloth (yard goods) -Grains: different -Packed: on EURO pallet -Weight: 168 kg

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Type MM2617 Sand Pad Size 3120170mm Sanding belt line speed 18m/s Working table angle 45 ? Working table size 1200240mm2 Motor 4 kW

Code: 0705 Brand: LANDONIO - ITALIA Model: LAR 600 Double disc sanding machine for working of patterns , moulds, wood pieces , metal and synthetic material Disc diameter mm 600 Motor Hp 6 Table size mm 800 x 300 Tables inclination 0-30° upwards/downwards Disc rpm 950 Spare disc Overall dimensions : mm 1250 x 800 x 1150 h Weight kg 580

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm