sand belt used for sale

Volpato LASM edge sander Mechanical Oscillation Constant grinding speed 1.5kw motor Grinding height about 100mm Tape length 2640mm Height 130mm Extraction spigot fi 100mm

Manufacturer: Bauerrischter, Type: KSK 92, Year: ca.1997, Control: hand, Monting of the machine: 1 Schleiband, Control: hand, Sanding belt hight: 60, Table length: ca.2000, Slewable sanding head: yes, Table stop mm: yes, Sanding area (beam): 60, Sanding belt width max mm: 2000 X 60, Sanding belt length max mm: 2000, Work piece hight min-max mm: 50, Feeding speed min-max m/min: 5-15, 1 Schleifmotor kW: ca.1,5, Sanding unit slewable up to 45°: 90-45, Suited for lacquer sanding: yes, Year :ca.1997

Volpato LVO 120 edge sanding machine SN 1929112 Year of construction 1999 Manufacturer: LASM Volpato Italy Small single-sided sanding centre VOLPATO offers the LVO 120 sanding machine, with a combined function that can make life easier for many professionals in the industry. It was developed under the direction of the company's experienced staff, who are passionate about achieving the best possible result. Vertical oscillating sander 2.2 kW motor (3 HP) Swivelling table 0-90 degrees Work table dim. 880 x 370 mm. Bgdyjyl27C Mechanically swivelling Additional support and ‘round’ sanding discs Belt dimensions 150 x 2580 mm. Suction device Weight 250 kg Overall dimensions: 700 x 1000 x 1150 mm. CE marking

Manufacturer: Reckmann, Type: Profilschleifmaschine, Year: ca.1979, Control: hand, Work piece width min-max mm: 100-300, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Schleifaggregate rechts : 3 X Doppelkopf<CRLF>schwinschlifer, Profile sanding units: 3, Unit 1 tiltable: yes, Unit 2 slewable: yes, Unit 3 slewable: yes, Sanding belt speeds m/min: shcwingung eistellbar, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4500, Year :ca.1979

Manufacturer: Venyeskob, Type: Bürste, Year: 1991, Work piece width min-max mm: 10 - 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 8 - 60, Working widht max mm: 300, Number of brushes: 6, Brushes straight: 4, Brushes inclinedt: 2, Diameter of brushes: 150, Power per brush kW: 0,8, Feeding speed min-max m/min: 10 - 60, Year :1991

Manufacturer: Heesemann, Type: Profilklotzeinschleifgerät PWST, Bauyeshr : 1994, Control: hand, Sanding belt hight: 80, Tischlänge mm : 800, Work piece hight min - max mm: 80, Control panel on top: yes, radius sanding device: yes, Profilwerkzeug-Formschleifmaschine PWS-T <CRLF>für das massgenaue Schleifen der Konturen vorgearbeiteter<CRLF>Profilwerkzeuge, bestehend aus<CRLF>über Getriebemotor oszillierend,<CRLF>Profilwerkzeuge auf Kreissegment schwenkbar gelagert.<CRLF>, Year :1994

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible.

Sanding belt dimensions 150x2250 mm Grinding table dimensions 525 x 160 mm (without plate, the plate you can see in the photos was glued on) Table dimensions on pulley 320 x 280 mm Suction nozzle Ø 100 mm Motor power 1.1 kW Connected loads 400 V, 50 Hz, 3~, 2.5 A Dimensions: 1,400 x 400 x 1150 mm

Key data: 2580 mm, 150 mm

BOERE KSM 1 Edge Grinding Machine Brand: BOERE Type: KSM-1 M-No.: Year of Make: 2006 Data: Length of work tables: 900mm Width of work tables: 400mm Table level: Height adjustable Dimensions: 1,7007501,250mm Scjhleifa unit inclination: 0-60° Abrasive belt: 2580150mm Grinding spindle: ø mm Main drive: 2.2 KW Oscillatation sanding belt: 0 - 25 mm - 0.37 KW Weight: 260 KG Press: 6 bar

Manufacturer: LASM Model: LS-2N1A Year of Manufacture: 2001 Type of Machine : profile sander with 2 sanding belts and one abrasive wheel station Technical Specifications: - Max workpiece thickness: 80 mm - Min workpiece length: 100 mm - Overall Dimensions: 4400 × 1400 × 1900 mm - Net Weight: 1200 kg Sanding Belt Units (x2): - Two-speed motor - Unit articulation: 135° - Belt dimensions: 80 × 2450 mm - Belt speed: 7–14 m/sec - Pneumatic belt tensioning - Mechanical oscillation - Pad movement timer (exit/return) - Air blowing system (belt cooling & cleaning) Abrasive Wheel Unit (x1): - Single-speed motor: 2 HP - Unit articulation: 180° - Max wheel diameter: 220 mm - Shaft motor diameter: 30 mm - Feed track speed: 5–25 m/min (variable) Find more here - / Contact us at -

OptiGrind GU18 Double Grinder 0.45kW 230V 50Hz Grinding wheel 175mm x25mm Speed 2850 rpm G&STÜ-3101510

An automatic flat glass sand blasting system MHG is available. Blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 6200mm/2500mm/3000mm, control: Siemens PLC. An on-site inspection is possible.

through-put width: 580 mm working heigth: 615 mm discs: 570 x 260 mm Air consumption: 400 l/min. air pressure: 2,7 - 5,5 bar 0: 184 Liter 0: Luft .. 3/8 Zoll weight: 125 kg range L-W-H: ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1220 x 615 x 580 mm (LxWxH) - including sandblasting gun (grain size 0.149 - 0.250 mm can be used) - Including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 820 mm working heigth: 810 mm Air consumption: 680 l/min. air pressure: 8,6 bar : 148 Liter 0: Arm Loch 180 mm air clutch: 3/8 Zoll weight: 160 kg range L-W-H: ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1110 x 820 x 810 mm (LxWxH) - very stable construction - including sandblasting gun (usable grain size 0.149 - 0.250 mm) - including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Transport dimensions / packed: 1350 x 1000 x 1100 mm - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8639 Type: TZS 1-2,5/1100-N Producer: Kovo Staněk Created: 2017 Parameters: Weight: 2500 kg

Cabin dimensions X/Y/Z: 3500mm/3500mm/2500mm, door dimensions X/Y: 2800mm/2200mm, small door dimensions X/Y: 1000mm/2000mm, illumination: approx. 750Lux, rotary table diameter range: 1000mm/2500mm, max. workpiece height: 300mm, max. table load (centered): 300kg, horizontal stroke: 2800mm, vertical stroke: 400mm, nozzles: 3. Pressure blasting pot volume: 200l, operating pressure: 8bar, deduster air volume flow 1: 1800m³/h, filter area 1: 17m², deduster air volume flow 2: 3600m³/h, filter area 2: 30m². Overall system dimensions X/Y/Z: approx. 3660mm/3660mm/2650mm, control: Siemens KTP700. Documentation available. An on-site inspection is possible.

An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

Edge milling machine and edge grinder Edge grinder for MDF wood 8 aggregate Its extremely precise system with pneumatic pressure means that after just one pass of the aggregates, the element is ready for priming or painting. Other offers - click - Rehnen Fmb Viet Long Belt Sander Belt Sander Brush Carousel Brush Brush Scraper Wood Scraper Cattinair Fladder Johansen Fama Heesemann Celfa Butfering Costa Lower Weber Boere Kundig Sandingmaster Stahle Levigaltecnica Rwt Steton Safo Houfek Felder Scm Sandya Unitek Vietmac Ked

Screen chute without drive for sandblasting systems, FUF, Vibra Technik, mint condition -60% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The part was purchased from a company's spare parts warehouse, has only minor signs of storage, has never been used and is completely new. - Vibra sieve chute without drive with MW5 sieve insert and GP5 silent block - 1150 x 600 mm approx. 100 kg A sieve chute is a component used in sandblasting systems to sieve blasting media. It separates larger particles from the finer grain size before the blasting media is reused and is part of the recovery system, where blasting media is collected, sieved and returned to the cycle after blasting. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the ...

Sanding machine Tyoe: SWT 335 QCH Manufacturer: Butfering/Weeke Year: 2015 Number of grinding units: 3 Working width: 1350 mm Sanding belt length: 2150 mm Sanding belt width: 1370 mm Workpiece thickness: 3 – 160 mm Feed rate: 2.5 – 13 m/min ontinuously adjustable Machine in good condition, fully functional Find more here - / Contact us at -

Brevetti C15 Double-Saw Miter Saw Machine designed for 45° cutting Use for cutting: decorative frames, furniture door frames, glazing beads Saw size max/min 275/250mm Saw speed 3250r.p.m Motor power 2×1.5kw Pneumatic material pressure Pneumatic feed of the cutting deck 2x 100mm extraction port

A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible.

Specifications: Manufacturer: Joisten-Kettenbaum Type: Mikromat 50 Compressed air capacity: 400 l/min. Pressure: 2 – 6 bar Metrics Diameter: 550 mm Condition Condition: Used Functional: Tested and fully functional

- Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW - Spannungsschwankungen max. +/- 5 %

- Producer Leif & Lorenz - Type B6 - Working width 1100 mm - Year of construction 2017 - 1. Unit - Stain brush System FlexTrim - Motor power 1,1 kW - Brush head speed adjustable by converter - Vacuum transport belt - Feed speed infinitely adjustable - Length 1.000 mm - Location - Colour 7035 - Voltage / HZ 400/50

- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %

Brush sanding machin with 3 working units. Machine has only a few operating hours. 1st working unit: - 5 rotating heads with 3 discs each - disc diameter 125 mm - quick change of the discs - motorized height adjustment 2. Station: - brush with diameter 300 mm - motorized height adjustment - Electronic inverter 4 kW 3. Station: - brush, diameter Durchmesser 300 mm - motorized height adjustment - Electronic inverter 4 kW - Rotative blower cleaning panel - Touch Screen IPC COMPACT 8,5 - conveyer with vacuum table - vacuum fan 7,5 kW - Vorschubgeschwindigkeit wird über einen FU geregelt - conveyer electronic inverter 2,2 kW - Producer Viet - Type Opera 5-3.3 XLL - Working width 1.350 mm - Year of construction 2018 - Working height 900 mm - Max. part height 200 mm - Vacuum transport belt - Operating side, left - Standort, nicht am Lager - Voltage / HZ 400/50 - Spannungsschwankungen ma ...

wird mit neuem VakuumTransportband ausgeliefert. - Producer Fladder - Type Gyro 300 VAC - Working width 1300 mm - Year of construction 1994 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

with two vacuum fans - Producer Fladder - Type Gyro 300 VAC-2 - Working width 1300 mm - Year of construction 1997 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - With sound insulating cabinet - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

Code: 0280 Brand: DIMA CEFLA Model: KLEIN/S - CE Standard Universal sanding machine for straight and curved pieces of wood, furniture, doors, frames, panels, composite materials and various - CE Standard Brush diameter 200 mm - Height adjustable shaft Sanding disc diameter 230 mm Motor 2,2 Kw Electronic speed variator Work surface dimensions 1400 x 920 mm Work surface dimensions with extensions 2200 x 1200 mm Work surface height 900 mm Suction inlet diameter 150 mm Overall dimensions mm 1600 x 1100 x 1150 h Weight kg 900

Key data: 540 mm, 570 mm

Injector indexing table blasting machine / sandblasting machine (used) For sale is a high-performance injector indexing table blasting machine from the manufacturer SES GmbH & Co. KG, suitable for cleaning and rounding machining components. The system impresses with its robust design, high process reliability and flexible application options with stainless steel blasting media or corundum. Manufacturer: SES GmbH & Co. KG Type: ITS-2300 Year of Make: 2012 Technical equipment Cycle turntable with a diameter of approx. 1,300 mm, material thickness 12 mm steel Drive via rotary indexing table 7 workpiece recording satellites Diameter per satellite: approx. 250 mm Load capacity: max. 20 kg per satellite Satellite speed: 10–60 rpm Maximum workpiece height: approx. 300 mm Blasting units 2 blasting stations with a total of 8 high-performance blasting heads  ...

Orbital sander COMEC mod. LC20AV - CE rules - Adjustable feeding speed - Min/max. working diam. 30/150 mm. - Min. bending radius 200 mm. - Complete with feeding units - Year 2006

Complete plant for the production of sand-lime bricks - Autonomous production plant with 6 employees - The plant is designed for a production of 50,000 tons /year - Pipe material round stone, aggregate size 32-50 mm - Crushing from 16-50 to 0-3 mm - Primary crusher/fine crusher/harp sieve/filler mill - Extinguishing in reactors 1&2 - Pressing: the press presses at 120 bar - Hardening boiler steam plant/so-called autoclaves = total 6 pcs. + 1 reserve - Residual steam is reused or discharged to the other halls - Packaging system: Fully automatic

Sandblasting machine MHG SMG 45K -Working space 1000x600x750mm -Work gloves -Two side doors, dustproof closing -Double-walled, noise-absorbing foamed -On/Off Suction & Lighting -Pressure regulators, pressure gauges and foot switches -Viewing panel Dimensions: LxWxH 1.5x1.5x1.8 / Weight 380Kg

Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible.

sanding height: 150 mm : 390 mm Sanding paper width: 400 mm engine: tba KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sandblasting machine Cassani STL A-600/2TR 2 turbines Sandblasting machine Cassani STL A-600/2TR 2 turbines

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-44803-297

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-44803-67

Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60? shore and segmented shoe, motor 22 kW 1 x Segmented shoe, motor 15 kW 1 x Brush Vacuum workpiece suction, 7.5 kW motor -Intermediate transport: 4200 x 1300 mm -Top sander 2 sanding units 1 x Combi unit with 70? shore contact roller and segmented shoe, 22 kW motor 1 x Segmented shoe, motor 15 kW, 1 x Brush Vacuum workpiece suction, motor 7.5 kW Feed speed: infinitely variable Table spring-loaded or fixed adjustable

1) sander top VEGA 311 MRL Sanding width 1100 mm. Working thickness 3 to 160 mm working height 950 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed adjustable 2.5-13 m/min 3 kW pneumatic sanding belt tension motor height adjustment 0.75 kW extraction rate: 11800 m?/h 2) bottom sanderVEGA U 311 MRF Sanding width 1100 mm. Working thickness 3 to 160 mm working height 920 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed  ...

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

Max. workpiece height 100mm Max. workpiece width 1000mm Min. workpiece width 500mm Top unit 6 brushes Top/bottom adjustable unit Helicopter rotating system 2 types of brush rotation speeds Smooth adjustment of belt feed speed Belt feed 1.5kW 4kW motor Diameter of the exhaust port 180mm, 200mm

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Smoking shelter steel construction clad with sandwich elements, approx. 350x250x250cm (WxDxH), colour grey white, closed on three sides

Used for sanding and finishing shoe components. Auction-ID: A7-45167-35

sanding machine designed for smoothing and refining cutting boards used in the cutting process. Auction-ID: A7-45167-23

Used for sanding and finishing shoe components. Auction-ID: A7-45167-7

Container, grit trap, storage container, transport storage container, storage tank, transport container, settling tank for groundwater lowering -Container: Transport storage container -Capacity: 4000 liters -Inner dimensions: 2990/990/H1000 mm -Connections: see photos -Dimensions total: 3570/1150/H1150 mm -Weight: 780 kg