san used for sale

carrying capacity: 1400 kg dimensions: 1690 x 950 x 1700 mm While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg height: 790 - 1150 mm width: 1200 mm : ja : 790 - 1150 mm : 120 x 1200 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - CE marking - Transport on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1 t clamping width: 810 mm Colour: 7016 RAL length: 1210 mm width: 810 mm height: 590 mm gear diameter: 175 mm dimensions of the machine ca.: 1370 x 840 x 605 mm Robust pallet trolley for the safe and easy transport of pallets in workshops, warehouses or factories -Made in Germany. - Four catch corners prevent the load from slipping during transport. - The pallet chassis is easy to move thanks to the castors maneuver. The transport can be carried out with low rolling resistance will. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 kg height: 500 mm width: 2000 mm : nein : 2000 x 100 mm : 2,0 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 800 - 950 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swivel arm punch Sandt, in good condition, immediately available Robsvvhfuer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

SANDRETTO série 9 1300/3000 Force de serrage : 300 T - 3000 KN Distance entre les barres d'attache : 570 X 570 mm Dimension du plateau : 860 X 860 mm Epaisseur du moule min / max : 210 - 730 mm Ouverture du moule : 630 mm Volume injectable : 658 cm3 Pression sur le matériau : 1985 bars Diamètre de la vis : 55 mm Puissance totale de la machine : 53,7 KW Rapport L/D : 20 Poids : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m

Key data: 3500 , 70

SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg

Bridge punch from Sandt with 30t

Description SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Clamping force : 40 T Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table 1 core pull 4 heating zone

SANDRETTO series 8 790-200 SEF 90 Clamping force: 200 T Distance between tie rods: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000kg Dimensions: 7.26 x 2.30 x 1.58 m Euromap 12 robot interface (CHAVERIAT A.111.24.PM - CH 2002 from 07/1998 as an option possible)

T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï» ¿ï»¿ï»¿ï»¿, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark

ICMA S.GIORGIO TWIN SCREW EXTRUDER, for PE PP PS PC ABS, Barrel with 2 x 110 mm co-rotating screws, n.1 vacuum degassing pump, semi-automatic hydraulic screenchanger (possible fully automatic screenchanger), no cuttins, but we can supply STRAND or WATER RING or UNDERWATER, Electric cabinet

Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Find more here - / Contact us at -

Key data: 1350 mm, 3 , 170 mm

SPECIFICATIONS: Machining width: 1350 mm Processing height: 170 mm Sanding belt unwinding: 2620 x 1350 mm Digital touchscreen control 2 15 kW motors COMPOSITION: I Calibration roller Ø 160 (90 sh) II Calibration roller Ø 170 (60 sh) III Roller + Pad Ø 150 (30 sh)

pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie bar : 510 X 510 mm Platen dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Injection pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage

Brand & Model: SANDRETTO Serie NS - 230 T Reference: NS 860/2300 Condition: Very good Technical Specifications: Clamping force: 230 T / 2300 KN Tie bar spacing: 585 x 585 mm Platen dimensions: 860 x 860 mm Mold thickness (Min/Max): 210 - 630 mm Opening stroke: 580 mm Injection volume: 475 cm³ Injection pressure: 1876 bar Screw diameter: 50 mm L/D ratio: 20 Dimensions & Weight: Weight: 10 500 kg

Key data: 1500 , 50

SANDRETTO serie 8 612/150 with SEF 90 Clamping force : 150 T Distance between tie bar : 460 x 460 mm Mould thickness min / max : 155 - 560 mm Opening strocke : 500 mm Injectable volume : 392 cm3 Pressure on material : 1560 bars Screw diameter : 50 mm Weight : 7000 kg Dimensions : 6,36 x 2,08 x 1,50 m

SANDRETTO serie 8 790/240 Clamping force : 200 T Distance between tie bar : 570 x 570 mm Platen dimensions : 860 x 860 mm Mould thickness min / max : 210 - 730 mm Opening strocke : 630 mm Injectable volume : 546 cm3 Pressure on material : 1450 bars Screw diameter : 55 mm Weight : 11 500 kg Dimensions : 7,68 x 2,35 x 1,78 m

Sandretto serie 8 MEGA T 1000 année 1996 Force de fermeture : 1000 T Diamètre vis d'injection : 150 mm Volume injectable : 11296 cm3 Epaisseur moule min/max : 450mm/1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1500 L Dimensions : 15,1 x 3,15 x 2,81 m

SANDRETTO serie 8 430/95 Clamping force : 95 T Distance between tie bar : 370 X 370 mm Platen dimensions : 560x 560 mm Mould thickness min / max : 100 - 460 mm Opening stroke : 410 mm Injectable volume : 286 cm3 Pressure on material : 1500 bars Screw diameter : 45 mm Weight : 5 400 kg Dimensions : 5,67 x 2,03 x 1,32 m

Type: SE 200 Serial number: 12338 Year of construction: 1999 Bowl: 320 litres, max 200 kg Mixing: 2 speeds Power: 3 x 380V, 50Hz, 12kW Dimensions: 1800 x 1400 x 2150 mm Weight: 1350 kg With movable mixing bowl and temperature indicator

Height=0.55 m, Overall length= 0.3 m, Overall width= 0.58 m, Net weight= 39 kg,

Height=0.5 m, Overall length= 0.3 m, Overall width= 0.55 m, Net weight= 38 kg,

Siemens Sirius soft starter Type: 3RW3027-1BB04 Input voltage: 200-480 V AC, 50/60 Hz Control voltage: 24 V DC Rated current: 32.2 A Power: up to 15 kW at 400 V Function: Soft start for three-phase motors Weight: approx. 1.2 kg Condition: used, tested Country of origin: Germany Price without VAT per piece Piece 1

Siemens SIRIUS soft starter Item number: 3RW3018-1BB04 Type: Sirius 3RW30 Control voltage: 24 V AC/DC Nominal voltage: 200-480 V AC, 50/60 Hz Rated current: 17.6 A Motor power: 4 kW (400 V) / 7.5 kW (230 V) Degree of protection: IP20 Weight: approx. 0.45 kg Condition: used, tested Price without VAT per piece Country of origin: Germany Piece 1

Table dimensions ... 2000x500mm Nominal pressing force ... 30t Slab dimensions ... 500x500mm Machine weight ... 3000kg The machine is in good condition, possible to test under power.

pressure: 75 t stroke: 8-80 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 70 mm table surface area: 900x600 mm ram surface: 900x470 mm hole in the table: 450x180 mm dist. between columns - front to rear: 500x350 mm dist. between pillars (front to rear): 788 mm total power requirement: 10 kW weight of the machine ca.: 10 t dimensions of the machine ca.: BxTxH 1600x1200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sänger & Massierer log infeed system

Milling cutters, End mills, drop cutters, Unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !

Manufacturer: NIDEC SANKYO Model: SR8220-019 Year of Manufacture: 2008 Type of Machine: 200mm THIN WAFER Loader NSX Condition Good Weight 1,433 lb (650 kg) Find more here - / Contact us at -

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 15 to PRESS TABLE   table surface (left-right): 360 mm   table surface (front-back): 260 mm SLIDE   stroke rate (max.): 165 /min SLIDE (MECHAN. PRESS)   slide adjustment: 40 mm   stroke min.: 7 mm   stroke max.: 60 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 226 mm ELECTRICAL SPECIFICATIONS   total power consumption: 1.15 kW   mains voltage: 400 V DIMENSIONS / WEIGHTS   total weight approx.: 630 kg ATTACHMENTS (PRESSES)   safety guard / safety door: yes   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

B&A REF:  9237 TON: 320 SCREW DIAMETER:  70MM SHOT WEIGHT: 1078 STROKE VOLUME:  1185CM3 INJECTION PRESSURE:  1500AR PLATEN SIZES:  980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1440MM EJECTOR STROKE:  240MM CONTROLS: SEF 200 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 22KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE:  HYDRAULIC

weight max. in kg: 2100 kg dimensions: 1750 x 950 x 1600 mm Technical data: Usable depth: 2x 420 mm Usable height: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Opening: 850 x 590mm. - Shaft distance: 215mm. - With 15KW E.motor.

ICMA SAN GIORGIO TWIN SCREW EXTRUSION LINE, used for PE PP, Forced feeding hopper with frame, Extruder with segmented screws 2x140 mm. 32 LD, 200 Kw drive, n.1 vacuum degassing pump, hydraulic screenchanger, Water ring pelletizer (year 2016), drying centrifuge in stainless steel, Constructed in 1990, Offered AS IS WHERE IS, conditions: used

: 5000 kg height: 800 mm width: 1200 mm : nein : 1200 x 100 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - Transport on request - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5000 kg height: 500 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,53 x 0,5 m Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - Transport on request - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1300 mm, 150 mm

Breitbandschleifmaschine Boere wide belt sander SANDRITE 1300 C-SP-V8 Specifications: • Only approx. 100 operating hours (comes from 1-man operation) • Commissioning took place in 2021 • 1-belt machine with full equipment • Machine is still in operation • 400 V, 50 Hz, 26 A, 13 kW, 2,380 kg • 1,300 mm sanding width • Vacuum carpet • 3 – 150 mm sanding height • 70° Shore • 2.5 – 11 m/min feed speed • Pressure shoes for intermediate lacquer sanding, veneer sanding and callobaring • approx. 30 abrasive belts still available Year of manufacture: 2018 Price: €25,000.00 plus VAT Available from: immediately Terms of delivery: ex site – EXW (Kassel district) Recommendation: Drive to the loading ramp with a truck and move with a pallet truck Payment Terms: Payment before pickup Accessories without guarantee. The following app ...

ICMA SAN GIORGIO TWIN SCREW EXTRUDER CO-ROTATING, used for elastomers TPE TPU SBS,.., Extruder with co-rotating segmented screws 2 x 140 mm 36 L/D, Screws speed 178 rpm, Reinforced gearbox, Siemens 430 kW drive, degassing pump, semi-automatic hydraulic screenchanger, hydraulic pack, Dry pelletizing unit, Electric panel overhauled in 2015, added touch control, Constructed in 1997, CE compliance declaration, electric drawings.

: 15000 kg height: 790 - 1150 mm width: 1200 mm : ja : 790 - 1150 mm : 120 x 1200 mm Support trestle, assembly trestle, steel trestle, welding table, assembly table, steel trestle, work trestle - Our support trestles are characterized by their stable construction, high load-bearing stability, and indestructible service life. - Trestle support made of screen printing - Powder-coated in RAL 5010 gentian blue - CE marking - Transport on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4410x3050x2727 mm Weight: 13070 kg Total power requirement: 172 kw Wide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination)- Max. Working width 1300mm- Min. Working Length 490mm- Working Thickness 3-150mm- First unit: Contact roller Ø240- Second unit: Contact roller Ø240- Third unit: Ø240 pad- Total: Motor 77kw- First Unit: Motor 30kw- Second Unit: Motor 22kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 1.5kw- First unit: Contact roller shore Steel- Second unit: Contact roller shore 80sh- Third unit: Contact roller shore 55sh- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 13502620mm- Air Pressure 0.6Mpa- Overall Dimensions 2235×3050×2600mm- Net Weight 5700 kgs- Working Table Fixed- Working table height from the ground 900mm- Voltage 400v/5 ...

Dimensions (L/W/H): 2850x2050x2200 mm Weight: 5150 kg Total power requirement: 78 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2800x2040x2200 mm weight: 5050 kg total power requirement: 95,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1280x2120x2050 mm Weight: 1950 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1280x2120x2050 mm Weight: 1950 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4630x3005x2334 mm Weight: 12160 kg Total power requirement: 135,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2260x2060x2230 mm weight: 3700 kg total power requirement: 57,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three units with tools for shaping / bending diemaking Kris PCM and Sandvik including metal table to mount/hammer onto