san used for sale

Key data: 900 mm, 2

Wide belt sander model SCSB – 2-900 Two-roll machine shoe roller Working width 900 mm --3291 operating hours Sandomatic brushing unit year 93

B&A REF: 8985 TON: 150 SHOT WEIGHT: 370 SCREW DIAMETER: 50MM STROKE VOLUME: 392CM3 INJECTION PRESSURE: 1560AR PLATEN SIZES: 690 X 690MM DBTB: 460 X 460MM MIN MOULD HEIGHT: 155MM MAX MOULD HEIGHT: 560MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 160MM CONTROLS: SEF 90 ROBOT INTERFACE: EUROMAP 12

B&A REF: 8983 TON: 380 SHOT WEIGHT: 1310G SCREW DIAMETER: 75MM STROKE VOLUME: 1370CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1140MM EJECTOR STROKE: 240MM CONTROLS: SEF 100 AIR VALVES: 1 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

B&A REF: 8986 TON: 700 SHOT WEIGHT: 5618G SCREW DIAMETER: 120MM STROKE VOLUME: 6107CM3 INJECTION PRESSURE: 1500AR PLATEN SIZES: 1560 X 1560MM DBTB: 1060 X 1060MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM CONTROLS: SEF 2000 AIR VALVES: 4 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

Sany SY 75 C, engine Yanmar 4 cylinder, Stage III B, air conditioning, hammer and grab cable, with backhoe bucket

SANY SY 50 Short tail, 5.4 to., SW S 40 Nordic S. Hammer & Grapple, Air Conditioning

CALIBRATING SANDING machine SANDINGMASTER SCSB2-900 second hand machine max. working width mm.900 composed by n.2 belts ( 2 separate motors ): 1° belt . calibrating roller in rubber diam.mm.260 . motor power Hp 15 2° belt . pneumatic pad . motor power Hp 10 belt dimension mm. 1900 x 920 volt. 380/50 weigth kgs. 2000

SANY crawler excavator SY 215C from 2019, only 280 hours, machine was a DEMO machine, hammer & grab line, SW Verachtert CW 40, NLC, hydraulic pump Kawasaki, condition as good as new

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

Table mm. 1250 x 920 Spindle diameter mm. 80 Tool holder ISO 40 Travel X mm. 1430 Travel Y mm. 985 Stroke Z mm. 850 Spindle speed 1500 rpm Quill stroke mm. 530 ECS CNC accessories

Screw diameter: 70 mm Calculated injection volume: 1355 cm³ Length/diameter ratio: 20 L/D Pressure on the material: 1959 bars Plasticizing capacity PS: 57 Kg/h Screw Speed: 177 RPM Hydraulic motor torque: 3181 Nm Hydraulic motor power: HP Nb Temperature zones: 4 + 1 N CLOSING UNIT Closing force: 4850 kN Opening stroke: 830 mm Mini /Max Mold Thickness: 250-850 mm Max distance between tray: mm Passage between columns: 740 x 740 mm Dimensions of the trays: 1120 x 1120 mm GENERAL Heating power: 45 kW Total installed power: 68.2 kW

SANDRETTO series 8 430/150 with SEF 100 Clamping force: 150 T Distance between columns: 460 x 460 mm Min / max mold thickness: 155 - 560 mm Opening stroke: 500 mm Tray dimensions: 690 x 690 mm Injectable volume: 286 cm3 Material pressure: 1500 bars Screw diameter: 45 mm total installed power 29 kW Weight: 7000 kg Dimensions: 6.36 x 2.08 x 1.50 m Euromap 12 robot interface core top dosage

SANDRETTO series 8 790-200 SEF100 Clamping force: 200 T Distance between columns: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Tray dimensions 770 x 770 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000 kg Dimensions: 7.26 x 2.30 x 1.58 m

SANDRETTO series 8 790-200 SEF 90 Clamping force: 200 T Distance between tie rods: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000kg Dimensions: 7.26 x 2.30 x 1.58 m Euromap 12 robot interface (CHAVERIAT A.111.24.PM - CH 2002 from 07/1998 as an option possible)

SANDRETTO serie 8 612/150 with SEF 90 Clamping force : 150 T Distance between tie bar : 460 x 460 mm Mould thickness min / max : 155 - 560 mm Opening strocke : 500 mm Injectable volume : 392 cm3 Pressure on material : 1560 bars Screw diameter : 50 mm Weight : 7000 kg Dimensions : 6,36 x 2,08 x 1,50 m

SANDRETTO series 8 1334/330 Clamping force: 330 T - 3300 KN Distance between tie rods: 650 x 650 mm Tray dimension: 980 x 980 mm Min / max mold thickness: 200 - 730 mm Opening stroke: 550 mm Injectable volume: 863 cm3 Material pressure: 1550 bars Screw diameter: 65 mm Heating power: 37 KW Total machine power: 57 KW L/D ratio: 21 Weight: 15,700 kg Dimensions: 7.85 x 2.36 x 1.85 m Euromap 12 robot interface aus core top dosage

SANDRETTO series 7 1960/350 Clamping force: 350 T - 3500 KN Distance between columns: 600 x 600 mm Dimensions of the trays: 910 x 910 mm Minimum/maxi thickness of the mold: 200 - 650 mm Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Weight: 14,500 kg Mounted mixing screw + std screw + one-piece screw

SANDRETTO Serie 8 sef 100 injection molding machine otto 200T E612 Sef 100 series Screw D50 / 392 cm3 / 1560 bar Between columns: 510 x 510 Opening: 550 Mold thickness: min 210 / max 630 Dim trays: 770 x 770 Installed power: 34.8 kW Dimensions: 6.36 x 2.14 x 1.84 Weight: 8800 kg Euromap 12 robot interface Auxiliary cores Top dosage

The press is currently decommissioned, and is equipped with an inverter for which it has energy consumption reduced to 50% It is equipped with a pneumatic solenoid valve. The cylinder is Bimetal replaced new for 3 years (polystyrene has always worked)

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thickness min / max : 200 - 730 mm
 Opening strocke : 710 mm 
Injectable volume : 658 cm3
 Pressure on material : 1985 bars
 Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20
 Weight : 14350 kg
 Dimensions : 7,54 x 2,31 x 1,91 m

SANDRETTO series 7 177/60 Clamping force: 60 T - 600 KN Distance between columns: 301 X 301 mm Tray dimensions: 455 X 455 mm Min/max mold thickness: 80-350 mm Volume injected: 125 cm3 Material pressure: 1408 bar Screw diameter: 40 mm Heating power: 6KW Weight: 2900 kg

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie rods: 510 X 510 mm Tray dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Material pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage Weight: 8100 kg Dimensions: 6.13 x 2.08 x 1.59 m

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thickness min / max : 210 - 730 mm
 Opening strocke : 630 mm 
Injectable volume : 658 cm3
 Pressure on material : 1985 bars
 Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20
 Weight : 11 000 kg
 Dimensions : 7,04 x 2,22 x 1,82 m

SANDRETTO serie 9 1780/3950 Clamping force : 395 T - 3950 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thickness min / max : 200 - 730 mm
 Opening strocke : 710 mm 
Injectable volume : 960 cm3
 Pressure on material : 1852 bars
 Screw diameter : 63 mm Total power of the machine : 66,8 KW Rapport L/D : 20
 Weight : 15 000 kg
 Dimensions : 7,80 x 2,31 x 1,93 m Additional option on this machine : Sequential injection

SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max mold thickness: 250 - 850 mm Opening stroke: 830 mm Injection volume: 1768 cm3 Material pressure: 1500 bars Screw diameter: 80 mm - 4 hydraulic cores - 1 blow gun - 2 8-way water boxes - Socket panel (4 three-phase, 1 neutral, 1 earth at the rear + 1 three-phase, 1 neutral and 1 earth at the front) Total power of the machine: 85 KW L/D ratio: 20 Weight: 21,500 kg Dimensions: 8.71 x 2.65 x 2.14m

Manufacturer : Sandretto Model: 300T 860 NOVE S Year of manufacture: 2004 Screw diameter: 50 mm Calculated injection volume: 475 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 193.2 cm³/s Pressure on the material: 1815 bars Plasticising capacity PS: 32.7 Kg/h Screw Speed: 295 RPM Hydraulic motor torque: 1128 Nm Temperature zones: 3 + 1 N Closing force: 3000 kN Opening stroke: 630 mm Mini /Max Mold Thickness: 210-730 mm Max distance between tray: 30 mm Passage between columns: 570 x 570 mm Dimensions of the trays: 860 x 860 mm Heating power: 30 kW Total installed power: 44.20 kW Oil quantity: 350 l.

SANDRETTO Serie nove T injection molding machine 300T E1300 Screw D63 / 863 cm3 / 1523 bar Between columns: 665 x 665 Aperture: 660 Mold thickness: min 230 / max 730 Dim trays: 980 x 980 Installed power: 55.5 kW Dimensions: 7055 x 2547 x 2160 Weight: 12900 kg Euromap 12 robot interface Auxiliary cores (PF and PM) Top dosage 2 socket boards 10-way stainless steel water box APEX robot

Injection molding machine SANDRETTO Serie otto sef 100 60T E192 Series otto sef 100 60T E192 Screw D35 / 131 cm3 / 1450 bar Between columns: 325 x 325 Aperture: 350 Mold thickness: min 90 / max 410 Dim trays: 500 x 500 Installed power: 25.25 kW Dimensions: 5.17 x 1.98 x 1.17 Weight: 4100 kg Euromap 12 robot interface Auxiliary cores blowgun Top dosage carpet control Socket table

Type: CTO 250A / 4000 Parameters: 250 t, 4000 mm Manufacturer: Strojárne Piesok Year of production / SO / GO: 1987 / - / 2001 Location: Czech Republic Description: The machine is in good technical condition. Forming force: 250t Max. sheet length: 4000mm Table width: 250mm Working height: 800mm Unloading in stands: 315mm Max. stroke: 250mm Passage between stands: 3420mm Free lift speed: 65 mm / sec Power hl. electric motor: 15kW Press dimensions LxWxH: 4040x1850x2950mm

B&A REF: 9009 TON: 220 SHOT WEIGHT: 575G SCREW DIAMETER: 55MM STROKE VOLUME: 529CM3 INJECTION PRESSURE: 1550BAR PLATEN SIZES: 860 X 860MM DBTB: 585 X 585MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 580MM MAX DAYLIGHT: 1210MM EJECTOR STROKE: 230MM CONTROLS: SEF 2000 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

- For palletizing by hand - This means that the pallet can always be adjusted to the optimum working height - With pallet roller conveyor for pallet transfer, onto the film wrapper - Film wrapper with pallet turntable - Joint control of the whole unit - Pallet removal, from the turntable

Description: Serial number 93307538 Clamping force 350 Ton, 3500 kN , Distance between the tie bars (HxV) 530 x 530 mm , Mould size 200 x 650 mm Diameter 70 mm Shot volume, calculated injection 990 cm3 Material pressure 1.980 bar Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Min/max mold thickness: 200 - 650 mm Dimensions 8010 x 1400 x 2480 mm Weight 14500kg Approx. Onsite Dimension. (l x w x h): 8,010 x 1,400 x 2,480 mm, weight approx.: 14,500 kg

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.