135,208 used machines on RESALE, but how to find them? Machine Search
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sander Vario Master 9480 strapping machine Manufacturer: Sander Type: Vario Master Model: 9480 Type: Vertical Strapping Machine Operating voltage: 400 V Power: 2 kW Control voltage: 24 V
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
San Cassiano SE80 Spiral mixer Removable bowl spiral mixer, 80Kg capacity bowls, two bowls, timer settings, forward / reverse, 3Ph
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 75 t stroke: 8-80 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 70 mm table surface area: 900x600 mm ram surface: 900x470 mm hole in the table: 450x180 mm dist. between columns - front to rear: 500x350 mm dist. between pillars (front to rear): 788 mm total power requirement: 10 kW weight of the machine ca.: 10 t dimensions of the machine ca.: BxTxH 1600x1200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7936 Type: T450 RCE Producer: Sangiacomo Created: 2018 Parameters: Compressive force: 450 t Table length: 1800 mm Table width: 1000 mm Stroke length: 20-250 mm Total power requirement: 37 kW Adjusting the ram: 120 mm Maximum stroke rate: 50 1/min Ram dimensions: 1400 x 900 mm Machine height: 4960 mm Machine width: 2880 mm Machine weight: 50000 kg
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm
Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm
Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm
maximum number of results exceeded
please refine your search
