sale used for sale

Technical data baler: Manufacturer BOA Type 2100 75 (8) PR SD Year of manufacture 1995 Operating hours 9,163 hours, as of June 23 Pressing force main press 90 t Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Filling volume / pressing cycle 2.4 m³ Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 2 x 37 kW Connected load 92 kW Tying system 4-fold vertical, fully automatic, prepared for 8-fold cross binding Throughput rates for quality: B12 / B19 approx. 10 t/hour, bale weight up to 1200 kg/bale Foil approx. 10 t/hour, bale weight up to 800 kg/bale Hydraulic oil tank capacity 1,500 L PLC control system Siemens SIMATIC S7-1500, renewal in 2020 Press dimensions built up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h) Transport dimensions 12,800 x 2,500 x 3,100 mm (l x w x h) Machine weight press approx. 30 t Noise level

2 x SOLAR SATURN 20 for sale. Package is complete, still installed and now FOR SALE 1.1mw each... Total 2.2 mw serious inquires and end user buyers only please email for further information. Basic details will be uploaded soon here on this page.

Sale directly from the owner! No middlemen! The machine for sale consists of 1 Casemaker 900/2400 Model Servo Drive System (Simca/DY), consisting of: - 1 Investor - 3 flexographic printing units - 1 groove slotting mechanism - 1 folding machine - 1 Valco glue device - 1 counter-ejector - 1 central control - 1 cable tray - 1 set of running rails and 1 prefeeder model 12x25 (Fossaluzza), consisting of - 1 basic machine - 1 autom. Stamp centering So far, the machine has only been test-run, and then dismantled again.

Complete production lines Dornow div. Potato peeling machine Very interesting for e.g. chip manufacturers, French fries manufacturers, potato farmers who could market their products directly to bulk buyers. Machine We sell a complete production line. This is a potato or tuber peeling unit consisting of: Conveyor belt Stone catchers, Roll peeling machine with an hourly output of 2t. 10m < for sale. However, these are not included in the price. This is a private sale, so no VAT. can be expelled. More photos on request

For sale Used cylinder heads. For Jenbacher 6 series F type gas engine. All in good condition and can be refurbished for re use. No cracks and no damage at all. We have 45 pcs at the moment and are available subject to prior sale

faceplate diameter: 1250 mm swing diameter: 1500 mm turning height: 1250 mm Control: Siemens type: 840 Dsl tool taper: 4 Pos. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1500 mm turning height: 1300 mm slide adjustment: 800 mm side head - cross travel: 550 mm digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1100 mm Control: Siemens type: 840 D Shop Turn Tool changer: x-travel: 2000 mm z-travel: 700 mm slide adjustment: 1000 mm Rapid movement: 6000 mm/min turning speeds: 500 U/min : total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mm swing diameter: 1600 mm turning height: 1500 mm Control: Siemens type: 840 D Tool changer: workpiece weight: 6500 kg Slide movement vertical: 1000 mm turning speeds: 10-315 U/min Feed: 3600 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1600 mm swing diameter: 1700 mm turning height: 1700 mm Control: Siemens type: 840 DSL Shop Turn : tool taper: 4 Pos. Rapid movement: 6000 mm/min turning speeds: 225 U/min x-travel: 2200 mm z-travel: 725 mm slide adjustment: 700 mm transmission ratio: 2 total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 3500 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered are 500 pieces of a 3in1 contactless infrared fiber thermometer - new in original packaging -. These come from an overstock at our customer and are currently offered with an MSRP of € 24.99 each. There are a total of approx. 3420 pieces. The 3in1 contactless infrared fiber thermometers are still in the factory near Leipzig (Saxony). The sale takes place ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarantee and a warranty with regard to the assets offered through us.

For sale is this hand truck for the transport of barrels. Condition from the pictures. --------------------- For sale is this hand truck for transporting barrels. Condition can be taken from the pictures.

From a current recycling, we offer you MAN / TANG TRUCK + flatbed + tarpaulin + trailer. Year of construction 2012 (initial registration 31.01.2012) Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We are happy to provide details upon request. Location: 61239 Ober-Mörlen The sale is without warranty Subject to prior sale

arm length: 8000 mm total column height: 4000 mm weight max. in kg: 3000 kg height: 4300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m K9F 0902 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/year For sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated). 1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S 1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW 1 piece sorting belt, long, right, no. 15,  ...

Komptech mobile drum screening machine Cribus 3800, year of manufacture 2014 Manafacture: Komptech Type: Cribus 3800 Year of construction: 2014 Connected load: 30 kW Diesel generator: 48 kVA Screening drum length: 6000 mm Screening drum diameter: 2200 mm Revolutions per minute: 20 Throughput: up to 220 cbm/h (depending on material) Transport dimensions: 12000 x 2550 x 4000 mm Weight: 18000 kg Material feed Bunker volume: 5 cbm Feed length: 4000 mm Feed width: 1675 mm Feed height: 2950 mm Material discharge Discharge height coarse fraction (30°): 3500 mm Discharge height fine fraction (30°): 3350 mm Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appoin ...

Komptech mobile drum screening machine MAXX, built in 2012, with additional equipment Manafacture: Komptech Type: MAXX Year of construction: 2012 Diesel engine drive: 62.5 kW Screening drum length: 4500 mm Screening drum diameter: 1800 mm Effective screening area: 22.5 m² Sieve hole: 25 mm Throughput: up to 120 cbm/h (depending on material) Transport dimensions: 11250 x 2550 x 4000 mm Weight: 16000 kg Material feed Bunker volume: 5 cbm Feed length: 4000 mm Feed width: 1675 mm Feed height: 2800 mm Material discharge Discharge height coarse fraction: 2550 mm Discharge height fine fraction: 2150 mm Accessories: Magnetic drum Central lubrication Air classifier Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sal ...

turning diameter over bed: 520 mm turning diameter over slide rest: 310 mm turning length: 2500 mm total power requirement: . kW weight of the machine ca.: 4 t dimensions of the machine ca.: . m The technical Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in the warehouse Over 8500 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR SALE Item #: Usm-179 Category Cap Applicator One Used Tetra Pak Cap Applicator 30 Flex For Sale: Flexible cap applicator for portion and family packages of aseptic brick pack product Output: 6600 - 9000 packages per hour Package volume: 200 - 2000 milliliters Package types: Tetra Gemina® Aseptic, Tetra Brik® Aseptic, Tetra Prisma® Aseptic (different package types and sizes may require OEM change parts) Allen-Bradley Logix5561 controls Nordson hot melt glue unit Stainless steel construction Touch screen HMI Servo driven Electrical Information 400/230 Voltage 3 Phase 60 Hertz

USED SIG CFA 406 FILLING LINE FOR SALE Item #: Usm-184 Category Sig Combibloc We have SIG Combibloc 2L machine CFA 406 Filling Line For Sale: CFA 406 filler, year 2004, working hours 33411 Sterile air system- 2004 Evacuation table- 2004 Buffer table- 2004 Closures Applicator- Combiswift type of closures- 2002 Tray packer- 2004 Conveyers

MWM Gas Engines TCG 2016 - 600 kW & 800 kW Module 1- TCG 2016 V 12 C - 600 kW - 54,035 operating hours -Natural gas - Engine number: 2211023 - Year of construction: 2013 Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 ----- - Complete TEM control with auxiliary unit control - RMG gas line – natural gas - Fresh and waste oil station MWM / Krampitz - 2x Aprovis exhaust gas heat exchanger - 2x external additional oil tank for aggregates - 2x cooler package MWM / Thermofin All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. The systems can also be purchased individually. Viewing is possible at any time by appointment ...

faceplate diameter: 1000 kg total power requirement: . kW weight of the machine ca.: 590 kg dimensions of the machine ca.: . m 340 rpm Bolt circle: 330 mm Jaw width: 550 mm Thickness: 170mm Passage: 145 mm The technical Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it apply exclusively our business and conditions of sale. About Us more than 400 of our own machines in warehouse over 12,000 m² of storage space, crane capacity 70 t more than 1000 items of accessories for your workshop You want to sell machines production lines or your business, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 630 mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m 950 U/Min Dicke: 120 mm J11SWB Siehe PDF Anlage The technical Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it apply exclusively our business and conditions of sale. About Us more than 400 of our own machines in warehouse over 12,000 m² of storage space, crane capacity 70 t more than 1000 items of accessories for your workshop You want to sell machines production lines or your business, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 760 mm, 510 mm, 610 mm

For sale Hurco vertical machining center type VMX-30 rental of an Ultimax 4 controller. Table size 1020 x 510 mm. Maximum speed is 10.000 rpm. The machining center has a tool changer with 24 positions, BT-40 spindle holder, cooling by spindle, chip conveyor, etc. All books are available, available at short notice, subject to prior sale. Other data; x-travel: 760 mm Y-travel: 510 mm z-travel: 610 mm Table surface: 1020 x 510 mm Workpiece weight max.: 1000 kg Spindle speeds: 10 - 10,000 rpm Spindle holder ISO: 40 Rapid traverse in X-Y-Z axis: 30/30/20 Feed speed: 1 -10000 mm/min Total power requirement: 18 kW Machine weight approx.: 5 t Approx. space: 4 x 4.2 x 2.8 m

We offer the Ghibli G90 Commercial Roaster from COFFEE-TECH Engineering for sale. The machine was put into operation in January 2022 and is in absolutely mint condition, as it has been little used (total mileage: approx. 13 tons). Due to internal restructuring, the roaster is now for sale. The Ghibli G90 roaster is an outstanding machine, especially due to its intuitive operation via the touch panel as well as its unique energy efficiency, which is state-of-the-art. All gates are pneumatically controlled and allow you to automatically follow your own roasting profiles if necessary. The extremely compact overall design allows easy handling. The latest update includes even more precise control via the touchpad. The machine is fully equipped, including afterburner and destoner, and can be viewed during operation. For more information, please visit the manufacturer's website. The ma ...

Sandblasting system, blasting system, sandblasting cabin, rotating basket system -Sale/sale: in current condition as seen -Attachment: Accessories are missing, individual components see photos -Blasting system: Type Exactomat 2 G - 60 -Volume flow: 26.2 m³/h -Dimensions: 830/580/H1730 mm -Total weight: 296 kg

Gear motor, electric motor, electric gear motor -Sale/sale: in current condition as seen -Connection housing: damaged, cover missing, see photos -Manufacturer: SEW-Eurodrive, geared motor type WA20 DR63S4 -Speed: 18 rpm -Power: 0.12 kW -Shaft: Ø 14 x 35 mm -Protection rating: IP55 -Dimensions: 300/170/H155 mm -Weight: 7.4 kg

Clamping head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: 23 pieces -Sizes: Ø 3 - 8.5 mm, see photo / parts list -Thread: M14 x 1.25mm -Dimensions: see photo techn. drawing -Sale: only for complete sale -Transport dimension: 180/140/H50 mm -Weight: 1.7kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Tension sleeves: 15 pieces -Sizes: Ø 3 - 25 mm, see photos -Admission: SK40 thread M16 -Sale: only for sale as a whole -Dimensions: 385/100 / H115 mm -Weight: 7.6 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Adapter sleeves: 15 pieces, with storage box -Sizes: Ø 4-16 mm, see photos -Sale: only for sale as a whole -Dimension box: 115/195/H50 mm -Weight: 1.4 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.3 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 12 pieces, with plastic box -Sizes: Ø 3-18 mm, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.2 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Adapter sleeves: 15 pieces, with storage box -Sizes: Ø 3-16 mm, see photos -Sale: only for sale as a whole -Dimension box: 115/195/H50 mm -Weight: 1.4 kg

Clamping head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: NT, adapter sleeves 17 pieces -Sizes: Ø 3-16 mm, see photos -Sale: only for sale as a whole -Dimension total: 70/135/H60 mm -Weight: 0.7 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Adapter sleeves: 131 pieces, with storage boxes -Sizes: 1-16 mm, see photos -Sale: only for sale as a whole -Dimension total: 655/320/H200 mm -Weight: 16.5 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Tension sleeves: 29 pieces -Sizes: 2-20 mm, see photo parts list -Sale: only for sale as a whole -Dimension box: 350/175/H55 mm -Weight: 4.7 kg

For sale; Goodway double spindle CNC lathe type GTS-200MMX equipped with a Fanuc 0i-TF control with manual guide i dialog part! This CNC lathe is equipped with 2 turrets. The left 12-position turret has no driven tool positions, the right 12-position turret has driven tool positions. The left spindle has a rod passage of 51 mm and is equipped with a 185E collet device. The right spindle is equipped with a Ø 210 mm chuck! The main engine power is 11/15 kW. The maximum turning diameter is Ø 280 mm. The movement X1, X2 is 190/220 mm. The movement Z1, Z2 is 270/740 mm. The machine is equipped with a chip conveyor with right-hand ejection and an LNS bar magazine type Servo III. Can still be visited under electricity, subject to prior sale.

Probat coffee roaster 12Kg Typ 2 - 2015 Only 1826 hours roasted ! Revised by Probat agent just before the sale Including cyclone and Phidget to monitor roasting curves on Artisan or Cropster Very good condition Don't hesitate to consult many more roasters are for sale!

x-travel: 3200 mm y-travel: 1400 mm z-travel: 508 mm table surface area: 3000x1250 mm column daylight: 1500 mm turning speeds: 35-5000 U/min spindle taper ISO: 50 control: Mazatron M Plus Table load: 5000 kg Tool changer: 30 chip conveyor: The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer for sale a 4-axis CNC milling machine MAHO MH-C 800, including a rich set of tools, jigs, fixtures and accessories (solid vices, fixtures, etc.), including two new sheet metal workshop cabinets. The spindle is mounted both horizontally (horizontal) and at the same time the original vertical head is installed on the machine. The machine has a system for cooling the workpiece with cutting fluid (the photos do not show the gutter part around the table for fluid drainage, but it is included in the price). The machine is in 100% condition. In 2018, a renowned company performed a complete GO. Since then, the machine has worked only about 300 operating hours on light tasks. The machine has COMPLETELY COMPLETE documentation, namely: Electrical connection of the machine Mechanics Hydraulics Control system documentation Programming documentation etc. Machine parameters:  ...

Sale of a complete line for the production of acoustic barriers for roads and railways. 1) A line for the production of containment boxes for road acoustic panels. The line is complete with all components, currently not assembled, but can be viewed upon request. If you are interested we can provide a quote, without any commitment, both for the complete production lines and for the individual parts. Dont hesitate to contact us if you are interested. Obviously the most attractive price is on the purchase of a complete line as the sale of a single component precludes the integrity of the entire line. Machines of production line list: 1) Profile for sound-absorbing panels to be installed on road barriers. 2) Piemme Decoiler. 3) Profiler with 12 transitions. 4) Cutting shears. 5) Roller bench. 6) Control console.

Sale of a 140T injection molding machine of the BILLION brand (Oyonnax France). Test press very little produced Type 485/140 VISU 5000 / AM 1992 totally renovated in 2016. Sold complete, as is, with these peripherals ... (hopper oven in particular) Almost new screw-barrel assembly (200 h). Small price for quick sale, cause repair and re-organization of the building.

We offer you a Pheatonn 50 kVA from a current recycling. Year of construction: 2022 Condition: used Original price: n.a. Asset Manager: Klaudius Giolbas Phone: 01722796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 16775 Löwenberger Land The sale is without warranty Subject to prior sale

We offer you a Pheatonn 50 kVA from a current recycling. Year of construction: 2022 Condition: as good as new Original price: n.a. Asset Manager: Klaudius Giolbas Phone: 01722796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 16775 Löwenberger Land The sale is without warranty Subject to prior sale

From a current recycling we offer you an MDB Green LV 600 incl. various add-on parts. Year of construction: 2022 Condition: used Original price: n.a. Asset Manager: Klaudius Giolbas Phone: 01722796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 41849 Wassenberg The sale is without warranty Subject to prior sale

We offer you Aichinger Refrigeration/Hot Counter System Gourmet II + SIRIUS 3.1.88 from a current utilization. Year of construction 2021 Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 56237 Nauort. The sale is without warranty Subject to prior sale