safe used for sale

sheet width: 1020 mm plate thickness: 2,0 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° work height max.: 900 mm total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1350 x 820 x 1140 mm Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing  ...

: 3000 mm Working width: 360 mm roll diameter: 60,0 mm weight max. in kg: 900 kg height adjustment: 620 - 1055 mm weight: 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 2,0 mm distance between columns: 1050 mm down holder: 1 Stück fence: Tisch 80 - 480 mm fence: Breiten 0 - 600 mm table-size: 1300 x 600 mm work height max.: 760 mm total power requirement: manuell kW weight of the machine ca.: 413 kg. range L-W-H: 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down ...

roll diameter: 51 mm Wheel width: 125 mm weight: 20 kg height adjustment: 560-975 mm Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 51 mm Wheel width: 350 mm weight: 20 kg height adjustment: 575 - 975 mm Load capacity per arm: max. 700 kg Furnishing: - Safe workpiece support - by massive and heavy-duty galvanized steel rollers - Roller support steplessly height adjustable and clampable - Problem-free and efficient material transport for the supply and removal of workpieces techn. Details: - Load capacity, max. 700 kg - Standpipe diameter 74/52 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Perfect for your labeling needs FleXpress incorporates our combined many years of expertise in laser technology: We have further developed proven basic elements and systematically tailored them to the requirements and guidelines of the European market. The result is convincing: With FleXpress you get a reliable, easy-to-use product with a very good price-performance ratio. It is adapted to your individual customer requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. User-oriented through and through Best usability and a high level of service orientation were the focus of FleXpress' development: The machine housing can be put into operation anywhere in your production to save space. Of course, the FleXpress meets the requirements for safe working in laser safety class 1. In addition, you can use the clear laser software ...

roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...

Lifting height: 2000 mm weight max.: 22 - 32 kg. weight: 13,5 kg Description : - Safe hanging of device and supply line - in the weightless state. - constant traction - Tear-proof steel cable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 2,5 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,82 x 1,14 m Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 2 ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3.650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band sa ...

: 3000 mm Working width: 360 mm roll diameter: 60,0 mm weight max. in kg: 900 kg height adjustment: 620 - 1055 mm weight: 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

: 5000 kg length: 5000 mm width: 2000 mm height: 500 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 1,0 t dimensions of the machine ca.: 6,3 x 2,0 x 0,5 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10000 kg length: 5000 mm width: 2000 mm height: 725 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 1,2 t dimensions: 6,7 x 2,0 x 0,6 m Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

Description: -Horizontal band saw Lantzmann BS910E Premium (electric motor) -Cutting speed control -Cutting size adjustment -Strong and strong rail system -Powerful engines for larger logs -Electronic height adjustment (EAR) -Tension indicator (strain gauge) -4.8 m cutting length as standard -40mm wide saw band Options: -GX630 Honda engine with electric starter -2m rail -Carbide saw band Technical specifications: Engine: Electric motor 11 kW Power: 400V / 50Hz / 3 phases Cutting diameter: 910 mm Cutting length: 4800 mm Frame: 4 parts Saw blade size: 4576x40x0.9 mm (Carbide, 208 teeth) Standard rail size: 6000x1010 mm Safe cutting speed: 20 - 30 s / m Tooth spacing: 22 mm (0.86 ") Saw blade wheel diameter: 508 mm (20 ") Automatic saw blade lubrication: No. Adjustable blade guide: Yes Log mounting bracket: Yes Package size: 2080x750x950 mm Weight: 761/821 ...

Ecat ovo compact EG10 In-Ovo vaccination system For modern hatcheries, the Egginject® Compact enables safe in-ovo vaccination thanks to its dual-pressure injection system. The Egginject Dual Pressure Injection System is a patented technology that allows the injection depth to be individually adapted to each individual embryo, regardless of size and age. Compact Egginect allows vaccination in small and medium-sized hatcheries - Adaptable to all types of incubation trays - Reliable and solid design for heavy use - Easy to use: simple and servant-friendly. - Stand alone or fully integrated into the Hatchery Automation Line. Year of construction: 2013 Item condition: used

Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter Ultrafiltration System for Air Compressor Condensate Oil/Water Separator for Compressed Air Condensate ● Treatment plant for the separation of compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water ● Intelligent control concept with programmable control for safe plant operation, incl. plain text display via text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection ● Optimized cleaning by comparing input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection wi ...

saw blade diameter: 350x 32 mm turning speeds: 3000 U/min : 115 x 115 mm : 160 x 90 mm capacity 90 degrees: round: 125 mm : 110 x 110 mm Capacity 45° rectangular: 75 x 45 mm : 120 mm Cutting height: 125 mm total power requirement: 1,5 kW weight of the machine ca.: 68 kg dimensions of the machine ca.: 780 x 480 x 850 mm Description: The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation! With this machine, double miter cuts on the right and left are possible up to 45 °. The miter adjustment is done here by turning the stop jaw. The TL-302-SA has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched over two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimal lubrication system and a fixed protection against the cutting area. The data for this ad was ...

pressure: 150 t throat: 550 mm stroke: 10 - 140 mm table surface area: 1180 x 980 mm no. of strokes: 40 Hub/min dayligth: 500 mm ram surface: 1040 x 800 mm ram adjustment: 70 - 150 mm tool shank hole (depth x diameter): 435 x 55 mm required power: 15 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t throat: - mm stroke: 250 mm Table dimensions: 2420 x 840 mm ram surface: 1850 x 650 mm dayligth: 500 mm ram adjustment: 110 mm distance between columns: 1900 mm table height: 170 mm no. of strokes: 25 - 45 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 2550 x 2370 x 3820 mm weight: 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement. The data for ...

Denios steel drip pan 200 liters Can be driven under with grate Used goods, good condition, see pictures Particularly compact, space-saving design Welded steel construction - safe & durable Corrosion protection through high-quality powder coating in gentian blue (RAL 5010) With optimized foot construction for internal transport Removable hot-dip galvanized gratings as adjusting plane SPECIFICATIONS Collection volume (l) 205 Storage capacity barrels of 200 litres each: 2 Grating galvanized Version can be driven under Material steel Outer width (mm) 1236 Deep outside (mm) 815 Height outside (mm) 355 Surface powder-coated Color blue Total payload (kg) 800 Weight (kg) 64 50 pieces available Negotiation price: € 250,-- net per pcs ex stock Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible a ...

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

The DH exxactly. QS is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. • Version as a tabletop unit or on a mobile base • For dimensional control in the machine room, in incoming goods or quality assurance • Smooth-running guidance for precise and fast measurement • Safe measurement of long workpieces by one person • Measuring range of choice up to 7,000mm (longer version possible on request) • Easy-to-read large digital display "Lowest-Power-LCD" • Power supply depending on the display unit battery or mains connection 100-240 VAC; 50/60 Hz • Dimension display on 1/10 mm

CP30 PRESS FOR CANS AND OIL FILTERS With its compact design and a pressing force of 8 tons, the CP30 efficiently presses metal cans and large oil filters up to a size of 30 liters. Recommended for car repair shops, paint shops and food manufacturers. Pressing force of 8 tons Low voltage control and emergency stop knob for safe working Easy removal of cans after pressing and drip tray for residual liquid SPECIFICATIONS Dimensions with stand: 2540 mm H × 1105 mm W × 680 mm D Dimensions without stand: 1435 mm H × 615 mm W × 680 mm D Dimensions of the pressing chamber: 475 mm H × 350 mm W × 350 mm D Weight: 245 kg Pressing time: 35 seconds Pressing force: up to 8 tons Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels IP54 protection class CE Certification Made in EU OPTIONS Savings model Suitable for use at sea Galvanized or stainl ...

The DH exxactly. TRP is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. Version as a tabletop unit or on a mobile base For dimensional control in the machine room, in incoming goods or quality assurance For daily inspection of your own machine lines Smooth-running guidance for precise and fast measurement Safe measurement of long workpieces by one person Measuring range of choice 1,000 to 7,000mm (longer version possible on request) Easy-to-read large digital display "Lowest-Power-LCD" Power supply depending on the display unit battery or Mains connection 100-240 VAC; 50/60 Hz Dimension display at 1/10 mm Accessories: With interchangeable centering tips suitable for measuring hole distances Interface with data connection to a PC for logging  ...

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

KEN 2311-HOS laboratory dishwasher KEN 2311-HOS is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and two-door (through) models. Continuous machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 t ...

KEN 2311 Laboratory dishwasher KEN 2311 is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, 3/4" RG, 5-30°C, 0-30°dH Water connection Hot so ...

Rotor Ø: 340 mm Working width: 410mm Motor power: 11-18.5 kW Rotor cutting strips: 5 Stator cutting strips: 2 Insertion opening: approx. 410 x 340 mm Capacity depending on plastic and screen size: approx. 130-400 kg/h Granulate conveyor: 1.1 kW Net weight: approx. 1640 kg Gross weight: approx. 1865 kg Box dimensions: approx. 2.2 x 1.7 x 1.6 m Feed belts with silencer Centre distance: 3700 mm Belt width: 400mm Net weight: approx. 296 kg Gross weight: approx. 430 kg Box dimensions: approx. 0.8 x 0.8 x 4.4 m - Overhaul in 2022 - Real bevel cut - Integrated sound insulation - Conveniently designed grinding room - Safe material acceptance - Optimum granulate quality - Built-in granulate conveyor system - Easy maintenance and cleaning - Tested occupational safety Ø of rotor: 340 mm Useful width: 410mm Motor output: 11-18,5 kW Rotor blades: 5 Stator blades: ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

IRAC SR MINI EVOLUTION printing screen washing machine was built in Italy in 2017. The machine is used in the process of semi-automatic cleaning of printing screens using room temperature solvents. The offer includes: – printing screen washing machine: IRAC SR MINI EVOLUTION 1000X1000 LST (2017). – solvent distiller with air tank: IRAC ALPHA 50/R (2017) The SR MINI EVOLUTION screen washing machine is equipped with a fully programmable pneumatic control system, allowing easy management and optimisation of the machine’s working phases. Directly directed nozzles deeply clean the entire surface of the printing screen, which is then rinsed and blown off. A high level of safety in the use of the printing screen washing machine is ensured by the fully hermetic design, guaranteeing no emission of harmful fumes. The ALPHA 50/R solvent distiller is an economical and environmentall ...

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Concept Laser Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminum and titanium alloys etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Shielding gas possible through 2 connections for external N2 generators (optional) Build volume 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501.973 hrs Laser 2: 503.411 hrs Other devices: Lifting device Inox 200 Weight: 102 kg Max lifting capacity 135 kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kw Voltage: 230 V 9.2 A IP65 pro ...

Discover our wide selection of 1000kVA transformers from well-known manufacturers such as Schneider, SGB, Pauwels and other trusted brands. These transformers are specially designed for reliable power distribution in various industrial applications. Features: Reliable performance: Our 1000kVA transformers provide efficient and reliable power distribution and ensure optimal operational safety for industrial processes. Voltage Options: Choose from a variety of voltage options to meet your specific project needs. Each transformer is equipped with primary and secondary voltage specifications to ensure high flexibility. Well-known manufacturers: We offer transformers from reputable manufacturers such as Schneider, SGB, Pauwels and other trusted brands that are synonymous with quality and reliability. Rugged Construction: Designed for demanding environments, these transformers feature ...

Curing injector Fomaco FGM 48F SC BLP M3 Injector Tenderizer FGM48FSCBLPM3 + belt filter CBF 500, used Type: FGM 48F SC BLP M3 manufacturer: Fomaco A/S, Denmark (fomaco.com) Year of construction: 2015 Flexible injector tenderizer for meat, poultry or fish industry. Good condition, previous use in the field of fish. The M3 is a series of thoroughly tested, high-quality production machines designed for use in demanding and aggressive production environments. The "box-in-box" construction seals and protects critical electrical components and controls from the ingress of water, moisture and weathering. By using state-of-the-art pumping systems, dead zones and low-flow areas are eliminated, resulting in a constant pressure and precise flow rate. The result is an even distribution of brine - regardless of product, type, size and number of needles. With the BLP quick release system,  ...

The compressed gas safety cabinet is a compact and reliable solution for the safe storage of compressed gas containers. With dimensions of 1.1x0.5x2.2m, this cabinet offers enough space for storing compressed gas cylinders of various sizes. The cabinet has been specially developed to meet the high safety requirements when handling compressed gases. It is made of sturdy materials and has reinforced doors as well as special safety devices to minimize possible hazards. Thanks to its compact size, the compressed gas safety cabinet can be used in various working environments, such as laboratories, production facilities or workshops. The easy handling and user-friendly design allow for easy storage and removal of the compressed gas cylinders -------------------------------------------- The pressure gas safety cabinet is a compact and reliable solution for the secure storage of pres ...

New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...

CNC circular saw KASTO variospeed SC 14 – used - : Price from location: 159.500.-€ (net), plus dismantling etc.! Manufacturer: KASTO Maschinenbau GmbH & Co.KG, 77855 Achern/Germany Year of construction: 2006 Technical data of the system: Dimensions of sawing material max. Ø tubes 150mm max. Ø piston rods 110mm Extraction device from Ringler: Power: 4.0 kW Voltage / Frequency 400V / 50Hz max. negative pressure 32 kPa max. air flow rate 520m³/h Sound level 62 dB(A) Protection class IP 54 System dimensions saw: Height approx. 2,200 mm Length approx. 3,900 mm Width (without chip conveyor) approx. 2,000 mm Weight approx. 4000 kg Connection. / Pre-safe. 36 KW / 100 A Former original price: 300.000,- EUR Available: now Condition: good - very good Location: Hamburg area Description of the plant: Machine body in welded construction. The machine stand, ca ...

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run bending program.  ...

HYSTER 5.5 FORTENS forklift built in 2009 is dedicated for fast and safe transportation of loads with a maximum weight of 5500 kg. Thanks to its reliable design characterised by maximum stability and excellent visibility in all directions, the forklift is ideal for even the most demanding challenges inside and outside warehouses. The vehicle’s LPG ignition engine features super-fast glow plugs to ensure fast and reliable engine starting in all conditions. The HYSTER H5.5FT gas forklift weighs 8160 kg Technical specifications of the LPG forklift truck HYSTER 5.5 FORTENS - maximum lifting capacity: 5500 kg - maximum lifting height: 4445 mm - weight centre (5000 kg load): 600 mm - weight centre (4650 kg load): 700 mm - weight centre (3800 kg load): 1000 mm - mast type: triplex - hydraulic accumulator: HYDRA SMOOTH - drive type: gas - vehicle weight: 8160 kg

The machine for closing bottles in modified atmosphere and under vacuum has been designed and built according to the most modern and advanced technologies. All the solutions adopted are the result of research and design aimed at the construction of safe, reliable machines capable of guaranteeing high quality and production standards. The machine was built with high quality components to ensure low maintenance and a long operating life. The pipes, fittings, valves, materials, installed instrumentation comply with the F.D.A. All the machine parts, the smooth surfaces, the rounded corners have been specially designed for facilitate cleaning and sanitization. Length mm 4550 Width mm 2310 Net weight Kg 5000 Frequency Hz 50 Voltage Volt 380 Production 9000 Bottles / h (100 ml) Size Used bottles 50 / 100 ml Material bottles used: glass Steam consumption 300 Kg / hour Water  ...

Hydr. Single column press make MÜLLER type CD 16.11.55Machine -No: 10480 Year 1983Press force: 16 tTable size: 450 x 350 mmPiston diameter: 90 mmBear size: 320 x 240 mmPiston stroke: 100 mmDiarrhea opening in the table: 100 mmDimensions L x W x H: 700 x 1100 x 2005 mmWith- Cutting impact damping- safe control- Two-hand release- Photocell- infinitely adjustable pressure settingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

C260 is the most compact deep draw thermoforming machine in his range keeping the maximum customisation that exactly meets the customer's production requirements. All this is possible thanks to the use of the IMA Safe technology which has developed robotized systems applied in the most critical areas: the product feeding area & the connection to the cartoner. Size changeover operations are rapid thanks to a reduced number of size parts. Technical data: Length mm 6000 Width mm 1530 Height mm 1850 Net weight Kg 2500 Frequency Hz 50 Voltage Volt 400 Production characteristics: Forming Depth 3 – 40 mm Production speed: up to 800 1-2 ml DIN ampoules/min up to 400 1 ml syringes/min Chiller dimensions 480 x 470 x 960 mm Film trolley dim. 860 x 800 x 1130 mm Additional format available 8 ampoules Format currently installed is for blister of 5 ampoules.

Description: -Horizontal band saw Lantzmann BS660E (electric) -Tension indicator (strain gauge) Options: -Additional rail, 2m -Saw band tensioner Technical data: Motor: electric motor, 5.5 kW Power: 400V, 50HZ, 3-phase Cutting diameter: 660 mm Cutting length (standard): 2794 mm Frame: 4 parts Standard rail size: 4000x900 mm Package dimensions: 2080x610x810mm Safe sawing speed: 13-15 s / m Blade speed: 17 m / min Tooth spacing: 22 mm (0.86 ") Saw blade size: 3690x34x0.9 mm Saw blade wheel diameter: 480 mm (18.8 ") Dimensions: 4064x1778x1800 mm Weight: 352/380 kg -This machine is available right away. -For shipping information contact us directly.

Description: -Horizontal band saw Lantzmann BS790E (electric) -Comes with saw band tensioner Options: -Additional rail, 2m -Saw band tensioner Technical specifications: Motor: electric motor 7.5 kW Power: 400V, 50HZ, 3-phase Cutting diameter: 790 mm Cutting length (standard): 2794 mm Frame: 4 parts Standard rail size: 4000x1030 mm Package dimensions: 2150 x610x810mm Safe sawing speed: 13-15 s / m Blade speed: 17 m / min Tooth spacing: 22 mm (0.86 ") Saw blade size: 3960x34x0.9 mm Saw blade wheel diameter: 480 mm (18.8 ") Dimensions: 4064x1778x1800 mm Weight: 352/380 kg -This machine is available right away. -For shipping information contact us directly.

Description: -Horizontal band saw Lantzmann BS660G with petrol engine -Stress indicator (strain gauge) Options: -Additional rail, 2m -Saw band tensioner Technical specifications: Engine: petrol, 9 HP (LIFAN, manual starter) Power: 301cc Cutting diameter: 660 mm Cutting length (standard): 2794 mm Frame: 4 parts Standard rail size: 4000x900 mm Package dimensions: 2080x570x830 mm Safe sawing speed: 13-15 s / m Blade speed: 17 m / min Tooth Distance: 22 mm (0.86 inches) The size of the saw blade: 3690x34x0.9 mm Saw Blade Wheel Diameter: 480 mm (18.8 inches) Dimensions: 4064x1778x1800 mm Weight: 315/355 kg -This machine is available right away. -For shipping information contact us directly.

Description: -Horizontal band saw Lantzmann BS790G (petrol) -Comes with saw band tensioner -Tension indicator (strain gauge) Options: -Additional rail, 2m -Saw band tensioner Technical specifications: Engine: petrol, 15 HP (LIFAN, manual starter) Power: 420cc Cutting diameter: 790 mm Cutting length (standard): 2794 mm Frame: 4 parts Standard rail size: 4000x1030 mm Package dimensions: 2150 x570x830mm Safe sawing speed: 13-15 s / m Blade speed: 17 m / min Tooth spacing: 22 mm (0.86 ") Saw blade size: 3960x34x0.9 mm Saw blade wheel diameter: 480 mm (18.8 ") Dimensions: 4064x1778x1800 mm Weight: 315/355 kg -This machine is available right away. -For shipping information contact us directly.