We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
SAF PLASMATOME 25 plasma cutting machine was built in 2000 in France. The machine, characterised by its rigid and robust design, is designed for precision cutting of sheet metal with a thickness of up to 45 mm. Thanks to the use of double drives on the longitudinal axis, high working speeds are obtained, which result in high quality and accuracy of machining. Workpieces are machined under a water sheet on a large work table measuring (L x W) 6000 mm x 2000 mm, using a cutting head powered by a powerful KJELLBERG PA-S45 W plasma source. The SAF AIR LIQUIDE PLASMATOME 25 plasma cutting machine is controlled by a control panel equipped with a multi-tasking CNC controller DIGISAF, allowing full control of the machine operation. Technical specifications of the SAF PLASMATOME 25 plasma cutting machine - CNC controller: DIGISAF - plasma source: KJELLBERG PA-S45 W - work table surface a ...
used
SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...
used
Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...
used
; ready for immediate use
used
Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...
used
; ready for immediate use
used
Working range : 2500mm x 6000mm 1 x Autogen 1 x Plasma 1 x Drilling unit HP Digital Process Control Plasma Source: Nertajet HP 125 Machine burner OCP 150 Without table and suction Option: suction table and filter unit assembly and commissioning on request; ready to use
used
; ready for immediate use
used
cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm
used
sheet width: . mm plate thickness: . mm pre-bending: . : verstellbar weight of the machine ca.: 150 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plasma cutting machine capacity 6000 x 3000 including: - 1 suction table 6000 x 2000 + 1 suction fan - 1 DIGISAF 100 digital control - 1 NERTAJET HP 120 generator; 1 OCP 150 plasma torch - 1 MESSER frame; a torch with its tool holder - 1 pneumatic plotter; these two accessories are removed . To date broken down, drive problem. Machine retrofitted in 2011.
used
Plasma cutting table Brand: SAF / Airliquide / Oerlikon Model: Plasmatome 20 Useful cutting capacity: 2000x6mm It has rails to expand the cutting length from 6000mm to 8000mm AZURMATIC Aspiration Table of 2000x6000mm (2 modules of 2000x3000mm) CNC: BURNY 3.5 DIGISAF Complete CNC manual available. Includes computer with the Lantek CadCam and the license backpack. Plasma generator: - Brand: Nertajet - Model: HP120 - Torch: OCP 150 - Cutting capacity: Carbon Steel: 15mm Stainless Steel: 15mm Aluminum: 20mm Equipment description: - It has height control - Double motorization in the portico - Movement speed: 10m / min
used
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers -Tube: Ø 82 mm -Total length: 510 mm -Recording hole: Ø 24 mm -Number: 2 pieces of shock absorbers available -Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece
used
Slack adjuster manual, slack adjuster, brake slack adjuster, brake adjuster -Number: 5 pieces available -Price: per piece -Dimensions: 310/160/H50 mm -Weight: 3.6 kg/piece
used
SAF set for sale for automatic submerged arc welding of plate girders or pipes 1. Pole mount with two heads, SAF 2. Power sources 2x1000A 3. Hydraulic station for welding plate girders, 15 m long 4. Rotator for welding pipes 4t
used
Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1 Profile bending machineSAF Curvatrici - CS 60 Digitral readout position upper roll Left & Right mode Horizontal & vertical positioning 3 sets off rolls included Hydraulic adjustment upper roller Horizontal and vertical:H + V Shaft Ø: 50mm Number of rolls: 3 x 165 mm Horizontal: Horizontal Stroke X-Axis: 200mm Capacity flat: 60 x 12 x 800mm Capacity Tube: 2" x 800Ø x mm Capacity bar: 35 x 35 x 800mm Capacity T-Profile: 60 x 60 x 900mm Working speed: & ...
used
Rounds: 3 mm Squares: 120 mm Flats: 120 mm Flats on edge: 120 mm Angles: 0 mm (1) horizontal / (2) vertical: 1 Profile bending machineSAF Tauring - DS 120 MACH-ID 7641 Make: SAF Tauring Type: DS 120 Year: 1986 Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 x 315 Capacity flat: 120 x 45 x 750mm Capacity Tube: 180 x 3 x 2500Ø x mm Capacity bar: 80 x 80 x 300mm Capacity T-Profile: 120 x 120 x 13 x 2500mm Working speed: 0 - 5mm/min. Length: 1600mm Width: 1800mm Height: ...
used
Mig Mag - Tig 240 amp - 60% with toch dimensions: 1100 x 500 x 950 mm weight: 190 kg
used
X - axis: 6000 mm Y - axis: 3200 mm CNC Brand: Digisaf CNC Model: 3.5 MACH-id 338 MAKE SAF Air Liquide TYPE PLASMATOME 25 YEAR 1998 SPECIFICATIONS Controll DIGISAF 3.5 Guillotine / Lazer / Cutting table Plasma cutting table Cutting lenght Stroke torch = 200 mm Maximum sheet thickness 0 - 20 mm Working area Length x Width 6000 x 3200 m Laser / Plasma / Gas cutting plasma mm CNC Saf Plasmatome 25 cutting table
used
Amperage range maximum: 480 A Amperage range minimum: 50 A (1) TIG / (2) MIG: 2 Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id 318 MERK SAF AIR LIQUIDE TYPE MIG 500 BLX SW YEAR 2000 ? SPECIFICATIES Voeding / power source in AMP 50 - 480 Amp AMP AFMETINGEN Lengte 925 mm Breedte 580 mm Hoogte 1200 mm
used
Workpiece weight: 0 kg Table diameter: 800 mm Table Ø: 600 + 800 mm Table load on 200 mm:650Kg Table load on 400 mm:200Kg Table load on 1000 mm:100Kg Rotation table: 0,076 - 1,5 ° Length: 1.200 mm Width: 800 mm Height: 800 mm Weight: 500 kg
used
working length: 8000 mm working width: 3500 mm Power: 300 A Plasma source: Nertajet type: HP 300 CNC burner heads: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.