saf turning gear used for sale

Recon Part number: 1216-3235 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm

For sale: REINTJES Marine gearbox WAF 560 Reduction: 5,947:1 Built 1992 The gearbox is in very good condition, always stored in facility with climate control. Price is Ex Works - The Netherlands. In case you need we can arrange the transport with very interesting rates. if you need further assistance or information please e-mail us: info@amp-power.nl Pictures available on request

Gear Deutz 816 NEW Part number: 0405 4284 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Recon Part number: 0337 9970 6/8 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Gear hobbing machine MIKRON 102 Max. workpiece diameter 120 mm Max. Modul 2 Max. lenght of teeth 130 mm Min./max.nr of teeth 6 – 325 Angle on helical gears 0 – 90 °

Vessel reverser in Exchange / reverse gear on exchange basis AS 71C; AS 72C; AS 73C; 10-17-000-001; AS1-71C; 10-17-000-002; AS1-71CR; 10-17-000-003; AS1-71CB; 10-17-000-004; AS1-71CBR; 10-17-000-005; AS2-71C; 10-17-000-006; AS2-71CR; 10-17-000-007; AS7-71C; 10-17-000-008; AS7-71CR; 10-17-000-009; AS3-71C; 10-17-000-010; AS3-71CR; 10-17-000-011; AS14-71C; 10-17-000-012; AS14-71CR

Completely overhauled gearbox in Exchange.

Gearbox Paragon PL 25 outdated to sell or in exchange Various variants in stock Ship reversing gearbox

Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.

LORENZ vertical impact machine SV00 - see pictures

Geared motor SEW Eurodrive SF32DT80N8-2BMG-HF-TF, 13/55 rpm, 220 V AC, 3 piece gear motor SEW Varimot

1 pallet with various geared motors - see picture type BG10-11/D06LA4-TF BAUER Danfoss BG10-11/D06LA4-TF Gearboxnord SK33F-90L/4Bre16 (2 stu)

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Bindler & Schneider Type: ZE 90/10-10-F/SL (Gear pump) Year of manufacturing: unbekannt output capacity: 6000 kg /h pieces: 1 different: guter Zustand I offer this machine in as-is where-is condition ex Warehouse Hess. Lichtenau, unpacked

Complete gear, from scrapped vessel. 2 pc on stock. All parts on stock for overhaul of this gear type.

Continuously variable speed gearbox, Variator VA31B101-72, Tos Znojmo, new Mechanical chain variator with stepless, electrical change of the ratio. - sufficiently large control range, - minimum maintenance requirements and - a simple operation Technical specifications: Drive speed: 950 rpm, Abtirebsdrehzahl: 448 to 2016 rpm Power: 2.85 to 5KW Torque: 60 to 24Nm Length: 660mm, width: 400mm, height: 580mm Weight: 145 kg State: The gearbox is brand new and was in stock as a spare part. Original packed

technical details gearbox: - Speed range output shaft: 18 - 49 rpm - Torque: 10.5 mkp = 103 Nm - infinitely adjustable via handwheel Technical data engine: - Manufacturer: BBC / YQU 80 MC 2a - Number: GS 608117 - 33 - Voltage: 380/200 V - Current: 2.6/4.5 A - Frequency: 50 Hz - Power: 1.1 kW - Cos φ: 0.86 - Speed: 2,860 rpm - Total weight: 40 kg - Dimensions: 600 x 280 mm - Hole dimensions base plate: 90 mm longitudinal / 140 mm wide - Transport dimensions: 700 x 450 mm (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1

N: 49351 Type: WAV 550 B building year: 1982 ratio: 5,158:1

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

Hydrostat / Acid Gearbox SPV23 000 29852

FOUR(4) PCS - MARINE GEARBOX TWIN DISC MG6848SC 2.931:1 MARINE GEARBOX TWIN DISC MG6848SC OVERHAULED COMPLETE WITH NEW HYDRAULIC HOSES AND CONNECTIONS

REINTJES MARINE GEARBOX WAF 643 - REDUCTION 3.938:1 735 KW 1450 RPM

TWIN DISC MARINE GEARBOX - MG 5050 - 2.5:1

2 PCS - TWIN DISC MARINE GEARBOX - MG 5202 DC - 5.04:1 - COMPLETE WITH NEW COOLERS AND HYDRAULIC HOSES ALSO AVAILABLE FOR SALE PER UNIT

USED MASSON MARINE GEARBOX

REINTJES MARINE GEARBOX - WAV 550 B - 5.158:1

REINTJES MARINE GEARBOX - WAV 500

2 PCS - ZF MARINE GEARBOX IRM 350 1.653:1

ZF MARINE GEARBOX ZFW 4610 5.037:1

TWIN DISC MARINE GEARBOX MG 516 RATIO 6:1 RUNNING TASKS OUT IN GOOD CONDITION

Hypoid gearbox, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 4,565 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: TPK+050S-MF3-175-0E1-1S11, I=175, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Free additional flange, see photos - Motor side: Centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: Centring D140mm, pitch circle D168mm x z12, - Additional flan ...

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

SEW Eurodrive Motor SEW RF 47 DT90L4/BMG/MM15

SOLD MARINE GEARBOX WITH PTO GUASCOR R360 4,4:1 SERIAL NUMBER 113058 MANUFACTURING DATE 13-11-2009

Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

20167 ZF BW 251 - 4.792:1 A 0.346 KW/RPM Brand Gearbox ZF Model Gearbox BW 251A Ratio 4.792:1 A Power 0.346 KW/RPM RPM 1800 RPM Serial Number 3815 General condition Taken out running condition With Flexible Coupling With SAE Housing With Controls Mechanical With Mounting Brackets SAE 0 Weight (kg) 880 Dimensions (cm) 100 x 105 x110

Geared motor from SEW . As good as new from bearing resolution SA57DT80N4/C Kw 0.75/0.75/S1 1380/42 Type M4A

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

URACA 690 bar

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.

harden furnace 1200 0.6x0.6x1.0m temperature 100 - 1200 Celsius possible various size Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Ha ...

Planing comb to Maag gear planing machine

Circulation cutter from Klingelberg

WHEEL.GEAR.GAER,IDLRJ.W.PUMP

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

max. wheel diameter: 650 mm gear width: 200 mm max. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mm table bore diameter: 150 mm number of strokes - stepless: 35,5 - 560 c/min max. ram stroke: 230 mm feeds: 3,55 - 40 mm/min radial feed: 0,8 - 9 mm/min work-spindle diameter: 110 mm total power requirement: 28,2 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,8 x 2,3 x 2,5 m Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.