126,706 used machines on RESALE, but how to find them? Machine Search
max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN
max. wheel diameter:300 mm gear width:110 mm max. module:6 weight of the machine ca.:10,5 t
max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt
Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning.
max. wheel diameter:600 mm max. module:6 weight of the machine ca.:0,9 t dimensions of the machine ca.:1,52 x 0,91 x 1,45 m
total power requirement:36 kW Available from approximately week 15 of 2026 A well-maintained gear grinding machine including: Automation Promot, year of manufacture 2012 Filtration system Hoffmann YOM 2012
max. wheel diameter:600 mm max. module:10 min. module:2 total power requirement:1,4 kW weight of the machine ca.:0,68 t dimensions of the machine ca.:1,6x0,75 m diameter of hob:15 mm gear width:140 mm
max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm
max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5
max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5
control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden
max. wheel diameter: mm gear width: mm max. module: 0 min. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm
The machine is in good technical condition, testing is possible by prior arrangement.
Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing
Liebherr / Lorenz S800 Gear - Hobbing Machine -Max. workpiece length with counter holder 600mm -Max. workpiece length with retracted counter holder 800mm -Max. travel of the milling carriage 360mm -Largest millable pitch for the largest workpiece 5 Pi / in the normal power range 8 Pi -Pick-up taper - milling spindle MK 5 -Mandrel 22/27/32/40mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter displacement 80mm -Milling cutter speeds 40-220 rpm -Feeds infinitely variable / horizontal -Feeds infinitely variable / vertical -Feeds infinitely variable / tangential -Clamping table without water rim 550mm -Clamping table hole 100mm -Mandrel taper MK5 Accessories: 1x pallet interchangeable wheels 1x pallet hob 1x pallet clamping mandrels Documentation Machine feet Dimensions: LxWxH 3.6x1.8x1.9 meters / weight 5000Kg
Key data: 450
The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...
Key data: 540
The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...
SEW Eurodrive Type SA67 DT90L-4 ZFISITI 3 chamfer 400 volts 1.5 kW 26 RPM Shaft 40 mm L 52.00cm W 25.00cm H 25.00cm
Inv. Num. : 8974 Type: OFA 16 SC Producer: TOS Generated: Parameters: Machine weight: 5 t
Edhard Gear Set for Filling FunnelProduct descriptionManufacturer: EdhardDishwashers fixedDetails see pictures
max. wheel diameter: 762 mm gear width: 116,84 mm max. module: min. module: total power requirement: 145 kW weight of the machine ca.: 27 t dimensions of the machine ca.: 5,5 x 5,3 x 3,4 m With the GLEASON Phoenix® 800HG bevel gear grinding machine, manufacturers of spiral, hypoid, and other bevel gears for large components can significantly increase their productivity. The machine enables faster grinding processes while maintaining the highest accuracy and excellent repeatability. Its extremely robust machine design forms the basis for stable machining processes, even for large workpiece diameters of up to 762 mm. Combined with a powerful FANUC CNC control system, the 800HG offers maximum flexibility for a wide range of gear geometries—from spiral and hypoid bevel gears to special forms. Thanks to its well-thought-out machine concept, the Phoenix® 800HG allows for reduced setup ti ...
Geared motor, electric motor, electric geared motor, aseptic motor -Manufacturer: SEW-Eurodrive, geared motor aseptic motor type WAF30 DAS80K4/TF/IS -Speed: 173 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 100 mm, built-in shaft Ø 15 x 30 mm -Flange: Ø 120 mm -Recess: Ø 80 mm Protection rating: IP66 -Number: 2x geared motors available Price: per piece -Dimensions: 385/150/H210 mm -Weight: 14 kg/pc.
Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, gearmotor type WAF20 DR63S2/TF -Speed: 332 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Flange: Ø 110 mm /Shaft Ø 15 x 30 mm -Protection class: IP55 -Number: 2x gear motors available -Price: per piece -Dimensions: 360/190/H250 mm -Weight: 7.7 kg/piece
Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, geared motor type SA47/T R17 DR63S4/TF -Speed: 4.7 rpm -Power: 0.12 kW -Hollow shaft: Ø 30 x 110 mm -Protection rating: IP54 -Number: 1x geared motor available -Price: per piece -Dimensions: 490/170/H255 mm -Weight: 18 kg/pc.
Separating clutch, adjustable gear motor, variable speed gear motor, electric motor -Spare part comes from a Heyligenstaedt type Heycop 3UN / 2000 -Rapid traverse: for lathe -Gearbox manufacturer: SEW -Motor manufacturer: SEW type DFW80K-2BS -Motor power: 0.75 kW 2760 rpm -Gear output speed: 1480 rpm -Brake and clutch: 24 V -Hollow shaft: Ø 25 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 615/350/H240 mm -Weight: 56 kg
geared motor, electric motor -Handover: in its current condition as inspected -Brake: not working -Speed: 80/40 rpm -Power: 1.0/0.6 kW -Design: B5 -Shaft diameter: 48 x 110 mm -Protection class: IP 44 -Price: per piece -Quantity: 2 pieces -Dimensions: 690/251/H320 mm -Weight: 55 kg
DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer of transmission: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Motor manufacturer: Siemens, type 1 FT5072-OAFO1-2 / Brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm //3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm -Dimensions: 540/275/H230 mm -Weight: 29 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Gearbox Lenze type 52.308.06.10 PGLP680 -Engine: away type AL90S/L-4 -Power: 1.5 kW 139 rpm -Speed speed: 139 rpm -Design: B5 angle -Shaft: Ø 28 x 70 mm -External fan: 0.05 kW wistro type A2E170 -Protection rating: IP55 -Quantity: 1 piece -Dimensions: 580/230/H245 mm -Weight: 40kg
Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg
Gear motor, electric motor, three-phase motor -Gearbox: Lenze type GST03-2 M VBR 063C32 002 B -Motor: Lenze type MDEMA1M063-32C -Power: 0.18 kW -Speed: 174 rpm -Shaft: Ø 20 x 40 mm -Construction: B3 -Protection class: IP 55 -Price: per piece -Number: 2 pieces -Dimensions: 330/124/H160 mm -Weight: 5.8 kg/piece
geared motor, electric motor -Engine comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 130 rpm -Power: 0.4 kW -Design: B5 -Shaft diameter: Ø 19 mm -Protection class: IP 44 -Number: 3x geared motors available -Price: per piece -Dimensions: 335/195/H110 mm -Weight: 10 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SSB, gear motor from automatic saw, drill and mill Rapid DGL / BFA -Type: DSG-012 / 20-0410.208.40 - K1 - B5 -Gearbox: Type 012 i = 6.98 -Speed: 380/40 rpm -Power: 0.75 kW -Construction: B14 Hole circle: O 100 mm (O10 mm) - Shaft: O 20 x 40 mm -Protection class: IP 44 -Brake: 24 V 1.3 A. -Dimensions: 515/230 / H170 mm -Weight: 22 kg
Geared motor, electric motor, electric geared motor -Manufacturer: Caenaho, geared motor type PA-09 / RD-09 -Voltage: 110 V / 50 Hz -Speed: 137 rpm -Performance: 1.27 m Technical data: see photo of the type plate Quantity: 1 piece available Price: per piece -Dimensions: 240/120/H200 mm -Weight: 6.2 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Geared motor: SSB Antriebstechnik type DS-SgFN009-0365,206,30-K1 -Speed: 87/12 rpm -Power: 0.25 kW -Construction: B14 angle -Hollow shaft: Ø 19 x 90 mm -Protection class: IP54 -Brake: 24 V -Dimensions: 305/115/H190 mm -Weight: 11 kg
gear motor, electric motor, three-phase motor -Handover: in current condition as viewed -Note: Mounting foot damaged (pictures) -Power: 2.2 kW -Speed: 11 rpm -Shaft: Ø 60 x 120 mm -Torque: approx. 2,000 Nm -Design: B3 -Protection class: IP55 -Dimensions: 745/340/H345 mm -Weight: 119 kg
Adjustable geared motor, variable speed geared motor, electric motor -Engine power: 9.2 kW -Speed range: 34-207 rpm -Electric motor: SEW type DFV132ML-4 -Transmission: SEW type R82-VU4HS -Motor: adjustable -Drive shaft: Ø 50 mm -Design: B3 -Protection rating: IP54 -Dimensions: 900/380/H670 mm -Weight: 247 kg
Geared motor, electric motor, electric geared motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, geared motor servo motor -Gearbox: Type KHF47/A 11 rpm i 131.87 -Motor: Type CMP71S/PK/RH1M/SM1 -Speed: 0 - 2000 rpm -Design: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205/H210 mm -Weight: 33 kg
Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.5 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 3x gear motors available -Price: per piece -Dimensions: 345/130/H165 mm -Weight: 12 kg
Gear motor, electric motor, three-phase motor -Manufacturer: Gearbox Bonfiglioli type MVF86/V -Speeds: 19 rpm -Drive: emod type B80L/4X K4 -Power: 1.5 kW 1360 rpm -with brake: 4 Nm -Construction: B5 angle -Shaft: Ø 35/40/85 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 290/280/H565 mm -Weight: 37 kg/piece
maximum number of results exceeded
please refine your search
