saf turning gear used for sale

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.3 rpm -Power: 0.55 kW -Diameter shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 690/285/H450 mm -Weight: 95 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 670 rpm -Power: 0.26 kW -Design: B3 -Diameter shaft: 25 mm -Protection rating: IP 54 -Quantity: 1 piece available -Dimensions: 215/170/H420 mm -Weight: 17.3kg

max. wheel diameter: --- mm gear width: --- mm max. module: --- min. module: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used vacuum filler HANDTMANN, type: VF 50 -completely overhauled- For filling, portioning and twisting. - All wear parts renewed - Oil in the vacuum pump and the hydraulics NEW - Incl. twisting gear - Computer control - Up to 300 portions per minute - Technically very good condition - 6 months warranty Capacity: max. 2,400 kg/h Filling pressure: max. 55 bar Portioning range: 5 - 100,000 g Hopper capacity: 40 / 80 l Visits and test runs are possible by arrangement.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 355/182/H175 mm -Weight: 13 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.12 kW -Construction: B3 angle -Diameter shaft: 9 mm -Protection class: IP 21 -Dimensions: 210/150/H135 mm -Weight: 2 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 70 rpm -Power: 0.55 kW -Design: B3 -with brake -Shaft diameter: Ø 25 mm -Wave height: 90 mm -Protection class: IP 54 -Dimensions: 470/200/H160 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 98 rpm -Power: 0.75 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 440/260/H160 mm -Weight: 18 kg/piece

MAX DIAM 250 X 2000

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 55 rpm -Power: 0.25 kW -Construction: B5/B14 -Diameter shaft: 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 440/140/H185 mm -Weight: 12.5 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 405/250/H170 mm -Weight: 14.5 kg/piece

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.75 kW -Speed range: 17 to 102 rpm -Motor: adjustable -Construction: B3 -Diameter shaft: 22 mm -Dimensions: 480/450/H200 mm -Weight: 38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 13 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 283 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Weight: 10.8 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 206 rpm -Power: 1.1 kW -Design: B8 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Dimensions: 470/250/H200 mm -Weight: 23 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50/60 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 3x motors available -Price: per piece -Dimensions: 255/155/H155 mm -Weight: 8 kg

Stock number: 3984 GEAR MILLING MACHINE Manufacturer: STAEHELY, Type: SHA 506 Machines NO.: 10442, Year of manufacture: 0 Specifications: Module 6 Table size 300 mm Ø Spindle speeds 100-500 rpm Accessories: Zuadds gear Operating instructions Length: 2200 mm, Height: 2000 mm, Width: 1300 mm, Weight: 4860 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 378 rpm -Power: 0.75 kW -Construction: B8 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 430/145/H180 mm -Weight: 17.5 kg

Stock number: PT1067, Gear pump, stainless acid proof steel,, ECO type GM4-KCT-KKS., 0,25 kW motor, 910 rpm.,, 220/380 volt., Ø 1/2 connections,, theoretical capacity 400 l/h., Material: Stainless acid proof steel AISI 316

DC Motor, Servo Motor, Gear Motor, Electric Motor, DC Gear Motor -Speed: 30-3000 rpm -Power: 0.15-15kW -Type: B5 -Diameter shaft: Ø 60 mm -Protection class: IP 44 -Number: 1x available -Dimensions: 1340/360/H580 mm -Weight: 282 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 1:2 -Drive shaft: Ø 20 mm -Dimensions: 190/190/H110 mm -Weight: 11.7 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 180 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H160 mm -Weight: 18.8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 178 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 480/150/H200 mm -Weight: 18.8 kg

Milling axes, dividers, grinding wheels, High: 1765 mm, Tall: 1765 mm, Weight: 2500 Kg, Width: 1100 mm, Long: 2570 mm, Ø tool: 250 mm, Total power: 7.5 kva., Ø of the grinding wheel: 250 mm, Travel of table: 400 mm, Height of points: 125 mm, Height of centers: 125 mm, Max. Ø to be sharpened: 250 mm, Power wheel motor: 3 Kv., Manufacturing number: 1905.04, Ø max to sharpen: 250 mm, Grinding wheel motor power: 3 Kv., Distance between points: 635 mm, Table tour: 400 mm, Revolutions of the wheel: 1750/2150/2850 mm, Length between points: 635 mm, Maximum length to sharpen: 400 mm, Revolutions of the grinding wheel: 1750 / 2150 / 2850 mm, Radial travel axis wheelhead: +35 / -65 mm, Maximum length to be sharpened: 400 mm, Vertical travel of the wheel: 175 mm, Vertical travel of the grinding wheel: 175 mm, Radial travel of the grinding wheel shaft: +35 / -65 mm, Cone holder shaft clamping pi ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 46 rpm -Power: 0.12 kW -Construction: angle -Diameter shaft: Ø 16 mm -Protection class: IP54 -Number: 2x motors available -Price: per piece -Dimensions: 250/160/H150 mm -Weight: 6.5 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 59 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 335/175/H160 mm -Weight: 11.6 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Speed: 30-3000 rpm -Power: 0.07-7.5 KW -Construction: B5 -Diameter shaft: Ø 50 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 1160/370/H530 mm -Weight: 222 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 137 rpm -Power: 0.37 kW -Design: Angle hollow shaft -Shaft diameter: Ø 19 mm -Protection rating: IP54 -Dimensions: 290/140/H200 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 59 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 330/160/H160 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 121 rpm -Power: 1.5 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 530/230/H210 mm -Weight: 35 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 178 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø mm -Protection class: IP 54 -Dimensions: 480/150/H200 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speeds: 130 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø mm -Protection class: IP 54 -Weight: 5 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speeds: 440 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 9 mm -Protection class: IP 54 -Weight: 3.3 kg

Gear motor, electric motor, three-phase motor, electric gear motor -small output shaft speeds: 1290 rpm -Diameter shaft: Ø 11 mm -Hollow shaft output shaft speeds: 91 rpm -Diameter shaft: Ø 19 mm -Power: 0.25 kW -Construction: angle hollow shaft -Protection class: IP 44 -Dimensions: 320/160/H180 mm -Weight: 14.5 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 109 rpm -Power: 3 kW -with brake: 24 V -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54 -Dimensions: 850/300/H300 mm -Weight: 91 kg

Gear motor, angular gear motor, electric motor, electric gear motor, three-phase motor -Angular gear motor -Motor power: 0.55 kW -Speed: 48 rpm -Pulley: Ø 170 mm -Construction: B5A -Shaft diameter: Ø 20 x 30 mm -Dimensions: 430/250/H190 mm -Weight: 19.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 60 rpm -Power: 0.10 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Dimensions: 245/130/H110 mm -Weight: 3.8 kg

Gearbox, spur gear -Translation: 1:14 -Drive shaft: Ø 28.7 mm -Output shaft: Ø 44.2 mm -Dimensions: 420/320/H280 mm -Weight: 77 kg

gear, gears, spur gear -Gear: Spur gear 30 teeth -Shaft mounting: Inner Ø 42 mm -Dimensions: see photos -Overall dimensions: Ø 80 x 60 mm -Weight: 0.9 kg

Stock# U2457-3 Used stainless steel horizontal screw conveyer by Van Beek BV (NL) type "U", model TR300. Width of the gutter 315 mm. Screw has diameter 300 mm, lead of the screw 270 mm, total length of the screw 290 cm. Conveyer has two inlets, each with diameter 298 mm and rotary magnetic separator by Goudsmit Magnetic Systems (NL). Each separator is driven by el motor and reducer 0.18 kW, 1320/21 rpm, 220-240/380-415 V, 50 Hz. Spacing between center axis of each inlet is 145 cm. Conveyer has also two rectangular discharge outlets, each with dimensions: 240 mm x 250 mm. Spacing between centers of discharge outlets - 250 cm. Screw is driven via reducer and el motor 2.2 kW, 220-240/380-415 V, 50 Hz. Working rotation of screw up to 64 rpm. Last time machine had been working in food industry as a collector of powdered products from two vibrating screens.

Gear motor, electric motor, electric gear motor -Motor: FIMEA type LR 71 b4 -Gearbox: 21 rpm, with oil level indicator -Power: 0.37 kW -Voltage: 220/380 volts -Hollow shaft: Ø 24 x 100 mm -Protection class: IP54 -Brake: 380 v -Dimensions: 470/160 / H195 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, gear motor type K37 DR63L4/BR/TF -Speed: 19 rpm -Power: 0.25kw -Shaft: Ø 25 x 50 mm -Protection class: IP54 -Brake: 3.2 Nm -Dimensions: 450/230/H170 mm -Weight: 22 kg

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Stöber, Gearbox type C002NO 105MQ10 -Translation: i 10,297 -Drive shaft: Ø 20 x 40 mm -Dimensions: see photo technical drawing -M2 perm: 43 Nm / n1= 3000 rpm -Dimensions: 240/140/H155 mm -Weight: 9.1 kg

Key data: 4000 mm, 1560 mm, 32

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

Gear motor, electric motor, electric gear motor -Manufacturer: Emod, gear motor type SK400SUF-63L-4/2 -Speed: 175/356 rpm -Power: 0.15/0.19 kW -Shaft: Ø 14 x 60 mm -Protection class: IP54 -Dimensions: 300/170/H180 mm -Weight: 10.6 kg