sa 800 used for sale

This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine.

Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details.

This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7 touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information.

This CB Levigatrici NV11.RRT belt sander was manufactured in 2006. It features a maximum working width of 1100 mm, operates on 400 V / 50 Hz, and has a total power of 48 kW. Weighing 2460 kg, its a robust choice for your sanding needs. Consider the opportunity to buy this CB Levigatrici NV11.RRT belt sander. Contact us for more information about this machine.

Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details.

Sandblasting machine MHG SMG 45K -Working space 1000x600x750mm -Work gloves -Two side doors, dustproof closing -Double-walled, noise-absorbing foamed -On/Off Suction & Lighting -Pressure regulators, pressure gauges and foot switches -Viewing panel Dimensions: LxWxH 1.5x1.5x1.8 / Weight 380Kg

Band Saw FORTE F320 -Cutting range 90 degrees / Round - 320mm -Cutting Area / Square - 300mm -Cutting area 45 degrees 220x200mm -Cutting speed 20-100 mm/min -Cutting pressure hydraulically adjustable -Material length stop -Motor 1.5 KW -Saw blade dimensions 3660x25x0.9mm -Roller conveyors -Various replacement saw blades Dimensions: LxWxH 2.2x1.2x1.6 meters / Weight 700Kg

Band saw Type: HTZ 1100 Pro Manufacturer: Mebor Year: 2020 MLD round timber conveyor Roller conveyor for sawn timber RC M800 L-P Machine in good condition, fully functional Find more here - / Contact us at -

Hacksaw RUCOCO RSR 500-4 -Saw diameter 500mm -Stroke rates 34-48-60-85 strokes /min -Mitre cutting device -Replacement saw blade 850x75mm -Machine feet -Roller conveyor Hjbkn Au Ssvc Dnxo Tsl -Coolant device -Documentation Dimensions: LxWxH 2.2x1.1x1.5 meters / Weight 2750Kg

KNUTH VB 510 Metal Band Saw, BJ 2018 Operating voltage:400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions:600x500 mm Incl. whetstone and sanding belt device Dimensions set-up:1150x700x2000 mm Weight:approx. 400 KG

A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible.

Technical data: - Cutting range at 90° around 260 mm - flat 260 x 260 mm - Material replenishment machine max. single stroke 600 mm - Max. section length in multi-stroke mm - Saw blade dimensions approx. 4100 x 32 x 1.2 mm - Cutting speed infinitely variable 12 - 100 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Chip conveyors - Total drive power 400 V / 8.5 kW - Space requirement approx. W 2350 x H max. 2340 x D 3050 mm - Weight approx. 3000 kg - from location D - 14943 Luckenwalde

Veneer Saw Scheer FM 8 - 3100 Cutting length 3100 mm Stop system with scale Extraction fan Compressed air clamping Use Machine Condition Good Prices: free loading plus VAT

Key data: 700 mm

Band saw Bäuerle Roll diameter 700 mm APA guides at the top and bottom! Runs great! Guided tours in a first-class condition Used machine Accessories lots of band saw blades

HOLZMA panel sizing saw HPP 82 with plates heavy-duty loading ex site for sale.

SICAR sliding table machine model SEGA 350, year 2025, CE standards: - 3200mm aluminum carriage - Useful cutting width on parallel guide 1250mm - blade D=350mm, motor KW 5.5 / HP 7.5 - scorer D=120mm, motor KW 0.75 / HP 1 - manual tilting of the blade unit - digital display of the blade group inclination - upper protection with built-in extractor hood Optional Installed: - motorized lifting of the blade unit - Digital reader on the parallel guide - n° 3 digital readers on the bars of the square guide

Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm

TECHNICAL DATA: Saw blade: Ø 500 mm Installed power: 5.5 kW Accessories: 01 Infeed roller conveyor: 3000 mm (idle) 01 Discharge roller conveyor: 1600 mm (motorized)

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

Panel saw manufactured in 2005. This SCHELLING FM-H 430 features a feed speed of up to 25 m/min and a saw feed speed of up to 120 m/min. It is equipped with a powerful saw motor of 19 kW and a clamp opening of 113 mm. If you are looking to get high-quality cutting capabilities, consider the SCHELLING FM-H 430 panel saw we have for sale. Contact us for further details.

Panel saw manufactured in 1994. This PANHANS 693 / EURO 30 features a cutting length of 5800 mm and a cutting width of 5150 mm. It includes a rear support table and multiple support beams for enhanced stability. If you are looking to get high-quality cutting capabilities, consider the PANHANS 693 / EURO 30 machine we have for sale. Contact us for further details.

Panel saw manufactured in 2001. This PANHANS EURO 32 features a cutting length of 5800 mm, a cutting width of 2x2200 mm, and a maximum cutting height of 100 mm. It includes a hydraulic lifting table with roller conveyor and an automatic angle cutting device. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS EURO 32 machine we have for sale. Contact us for further details.

Key data: 5300 mm, 2200 mm

Panel Saw Holz-Her Type 1211 Machine No. 579-FD82 Cutting length maximum 5300 mm Cutting height maximum 2200 mm Cutting depth maximum 80 mm Motor power 3/4 kW Saw blade diameter 300 mm Swivelling sawing unit Slatted frame automatically evasive Free-standing installation possible Saw frame can be divided in height for transport Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm

A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible.

Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible.

Panel saw Type: Concept 350 Manufacturer: Fimal Year: 2019 Main blade 350 mm Pre-cutting unit Massive formatting table Precise parallel ruler Strong and stable operation 400 V / 3 phases 20 pcs of discs included Machine in good condition, under power Find more here - / Contact us at -

A precision circular saw Rohbi is available. Solid material cutting range: 50mm, tube and profile cutting range: 50-60mm, max. saw blade diameter: 225mm, bore: 20mm, speed: 1400rpm, max. feed length: 600mm, max. cutting length: 160mm. Machine dimensions X/Y/Z: approx. 1700mm/850mm/1600mm, weight: approx. 400kg. An on-site inspection is possible.

sanding height: 150 mm : 390 mm Sanding paper width: 400 mm engine: tba KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect

Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg

 Wood Her CUT 6120 heavy-duty precision high-performance panel sizing line Cutting length 3900 mm Cutting depth 3100 mm Saw blade protrusion 82 mm Control CUTCONTROL 2, 17" TFT screen – touch Powerful optimization software CD CUTTING SYSTEM Label Printers 3 air cushion tables 1800 x 600 mm Car. Angle pressure device up to max. 1300 mm Car. Cutting Setup Residual cutting device Cable remote control pneum. Trimming stops Main saw unit 11 kW, saw blade DM 350 mm Scoring Saw Unit 2.2 kW, Saw Blade DM 180 mm Saw carriage feed 0 - 100 m/min infinitely variable Saw carriage return 130 m/min Width stop feed 0 - 100 m/min (EU 0-25 m/min) Width stop feed - return 100 m/min Collets width stop 7 pcs. Compressed air connection capacity 6 bar Extraction connection basic machine 1 x 120 mm Suction connection pressure beam 3 x 120 mm Extraction capacity 3500 m³h Air speed 30 ...

Product protection workbench with horizontal, low-turbulence displacement flow. ISO Class 5 with UV-Light.

Manufacturer: Horizon Model: MC-80 Year of Manufacture: 1995 Type of Machine : Saddle Stitching and Collating Line SYSTEM COMPONENTS - Collating Machine: Horizon MC-80a - Collating Tower II: Horizon MC-80m - Collating Tower III: Horizon MC-80m - Stitching and Folding Unit: Horizon SPF-10II - Front Trimmer: Horizon FC-11 - Jogger: Horizon PJ-75 Find more here - / Contact us at -

Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.

Jrion & Denz longitudinal saw Edging saw longitudinal circular saw Type HMS 15 Cutting length 3400 mm Cutting width 650 mm Cutting height maximum 120 mm Width stop can be adjusted motorically at the touch of a button Saw motor 11 kW Hydraulic pump feed 1.5 kW Saw blade feed speed infinitely variable 1 – 60 m/min. Saw blade return 60 m/min. At full capacity of the maximum cutting height of 120 mm, the maximum cutting length is 3200 mm. Saw blade diameter maximum 450 mm Cutting height for saw blade diameter 400 mm, 105 mm Saw blade bore 30 mm Extraction connection diameter 200 mm was mainly used to cut 80 mm thick planks Saw is activated via footswitch Rated current 23 A, frequency 50 Hz Instruction manual included Saw blades included 2 pieces diameter 400 mm, 4 pieces 450 mm Good, ready-to-use condition Machine Dimensions: 5750 mm x 1700 mm x H 1200 mm

Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with indepe ...

for dosing sauerkraut or red cabbage into flow packs (without flow pack machine),, Dosage 250 g to 500 g Speed of the screw dosing frequency controlled,, 40 beats per minute possible,, different programs can be saved., power: up to 40 cycles / min, and a: up to 40 cycles / min, Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean.: up to 40 cycles / min

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

Find more here - / Contact us at -

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

cut-off saw machine model BOTTENE TE 500 . second hand machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various diam. blade mm. 500 engine power 6.5 Hp max. cutting size mm. 500 x 135(H) total length of machine cm. 507 volt. 380/50

Mayer FH2-3120 veneer saw, fine-cutting saw with joining unit (planing unit) and veneer stop table Robust mechanical engineering from Mayer A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3100mm The sawing unit and joining unit are combined in one unit, so that only one unit has to be moved. Easy to guide sawing unit, runs on linear guides. Rear storage table with penetrating finger stop, adjustable from approx. 2 - 62cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Drive motor saw 1.8kW, milling 1.0kW The motors can be switched on practically on the handle, so they only run when they are needed. HM-tipped fine-cut blade, sharpened Plough head Z4, equipped with new carbide indexable inserts Practical front veneer shelf, pull-out for pla ...

Bäuerle pull saw with support table left/right and stop. 400mm circular saw blade Cutting depth approx. 450mm Year of construction unknown 3KW

This 3-axis BIESSE Selco WN 2 was manufactured in 2020. It features a robust machine weight of 3900 kg and operates on a power supply of 400 VAC with a consumption of 12 kW. The machine is designed for efficient panel cutting and includes a CE marking for compliance. If you are looking to get high-quality panel saw capabilities, consider the BIESSE Selco WN 2 machine we have for sale. Contact us for further details.

Belt sander manufactured in 2008. This TECNOLEGNO COMPACT 52 is a 5-aggregate sander designed for sanding edges and profiles. If you are looking to get high-quality sanding capabilities, consider the TECNOLEGNO COMPACT 52 machine we have for sale. Contact us for further details.

Belt sander manufactured in 2015. This Kundig Premium-1 1100K features a supply voltage of 400 V/AC and a control voltage of 24 V/DC. It operates at a current of 24.90 A and has a power rating of 12.62 kW. If you are looking to get high-quality sanding capabilities, consider the Kundig Premium-1 1100K machine we have for sale. Contact us for further details.

7 sheet feeders 1 Envelope Folder Feeder Staple station Three-knife trimmer with double use Stackers without compressor

Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details.

Sandblasting machine Cassani STL A-600/2TR 2 turbines Sandblasting machine Cassani STL A-600/2TR 2 turbines