sa 800 used for sale

Key data: 280 mm

Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...

Key data: 670 mm

Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg

Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.

An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

Height=1.36 m, Overall length= 2.56 m, Overall width= 0.76 m, Net weight= 448 kg,

Height=1.36 m, Overall length= 2.56 m, Overall width= 0.76 m, Net weight= 103 kg,

cutting diameter: 520 mm saw band length: 7239 mm cutting range square: 520 x 520 mm feed length: 500 mm feed length: 4500 mm cutting length min.: 6 mm : 10/100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm weight of the machine ca.: 4,2 t dimensions: 2300 x 3420 x 2385 m Control: MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m Unused display machine 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In add ...

Height=2.1 m, Overall length= 1.35 m, Overall width= 1.8 m, Net weight= 1353 kg,

Height=1.75 m, Overall length= 0.95 m, Overall width= 1.07 m, Net weight= 480 kg,

Height=1.3 m, Overall length= 0.9 m, Overall width= 3.35 m, Net weight= 400 kg,

Height=1.26 m, Overall length= 0.7 m, Overall width= 0.9 m, Net weight= 400 kg,

Band Saw Optimum S300 VG BJ 2000

Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.

A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.

Speed: 14,000 sheets per hour Format (cm): max.: 48 x 32 The line consists of: - 4 x Inserter stations - 2 x Card inserter stations with adhesive unit (can also be used as standard inserter stations – top loading) - 1 x Cover feeder - 1 x Duplex sheet inspection unit - 1 x Stapling unit with (Hohner SB 50 heads) 2+2 - 1 x Three-knife trimmer with center cut - 1 x CROSS STACKER RIMA

BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy/ • Digital display unit with 4 channels (B1-B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for mains & lamp • Power supply: 220 V Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed

Sawblade tiltable: 0 - 45 ° Length of the rolling table: 3.200/3350 mm cutting width: 1.100 mm Motor output: 5,5 kW Cutting height: 155 mm Cutting height at 45°: 110 mm Saw blade diameter: 450 mm Speed: 3.000/3.600/4.200 U/min. Dust suction hood: 1x120 , 1x80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50

Edge milling machine and edge grinder Edge grinder for MDF wood 8 aggregate Its extremely precise system with pneumatic pressure means that after just one pass of the aggregates, the element is ready for priming or painting. Other offers - click - Rehnen Fmb Viet Long Belt Sander Belt Sander Brush Carousel Brush Brush Scraper Wood Scraper Cattinair Fladder Johansen Fama Heesemann Celfa Butfering Costa Lower Weber Boere Kundig Sandingmaster Stahle Levigaltecnica Rwt Steton Safo Houfek Felder Scm Sandya Unitek Vietmac Ked

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

saw blade diameter: 450 mm cutting diameter: 150 mm stroke: mm total power requirement: 4 kW weight of the machine ca.: 1,05 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.

Boki HY1350 municipal vehicle with snow plow and sand/salt spreader, Technical specifications:, - Registration date: 08/1994, - 3.82 m long, - Performance: 64 k, - Diesel engine, - with German approval, - All-wheel steering defective, - Oil loss from the engine, Accesories:, - with three-way tipper, - hydraulically pivoting snow blade, - German approval

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

Materials: PP // Film Width (Max): 1600 mm

Materials: PP // Film Width (Max): 1650 mm

Brand: SICA Type of Machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacturing: 2000

Dismantling Saw Freund K18-01, Model 01-03 with cutting depth adjustment, Connection 230V, weight approx. 10kg, good used condition, fully functional

JRIMAC Slitting Saw "TOP" - NEW - · Cutting length 2200 - 9200 mm · Cutting width 420 - 2120 mm · Cutting direction left - right (on request right - left) · Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. · Precise and clean cut due to strong, self-supporting welded construction of the machine stand. · Carriage guide via linear guides, with ball-bearing, maintenance-free rollers. · Safety beam mounted above the machine table with 6 mm thick slat protection. · Suction connection Ø 160mm installed at table height at top right and bottom left ready for connection. · Flexible and efficient working thanks to the 250 mm opening of the slat guard above the top edge of the table. · Stepless, frequency-controlled, performance-stable feed of the carriage. · The max. feed speed can be adjusted. · Automatic stepless saw blade height adjustment. · Stepl ...

JRIMAC Slitting Saw STANDARD -NEW- - Cutting length: up to 6,200mm - Cutting width: 420 - 2,120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut - Cutting accuracy +/- 0.5 mm - Hold-down device with extremely strong slat protection, and extraction connection - PLC machine control - Stepless, frequency-controlled, power-stable feed motor - Convenient semi-automatic saw blade height adjustment - Stepless width stop adjustment - Saw blade quick clamping system "JRIMAC" - Front table support made of plastic or solid wood - Force-guided splitting wedge - Lower standard extraction duct installed ready for connection - CE compliant, dust tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional

cutting diameter: 440 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 610 mm cutting capacity - flat: 440 x 500 / 30° mm cutting capacity - round: 440 /30° mm cutting capacity - square: 440 x 440 / 30° mm cutting capacity - flat: 440 x 410 /45° mm cutting capacity - round: 410 /45° mm cutting capacity - square: 410 x 410 / 45° mm cutting capacity - flat: 440 x 250 /60° mm cutting capacity - round: 320 / 60° mm cutting capacity - square: 250 x 250 / 60° mm cutting capacity - flat: 440 x 610 / 90° mm cutting capacity - round: 440 / 90° mm cutting capacity - square: 440 x 440 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3000 x 1200 x 2000 mm Inverter Hydraulic vice Saw blade at an angle of 3° Digital dis ...

Panel sizing saw 4.200x4.200mm Very good technical condition! PC control up to date. incl. optimization software (office version) More information on request. The machine is available immediately! Viewing and demonstration at short notice by appointment!

Screen chute without drive for sandblasting systems, FUF, Vibra Technik, mint condition -60% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The part was purchased from a company's spare parts warehouse, has only minor signs of storage, has never been used and is completely new. - Vibra sieve chute without drive with MW5 sieve insert and GP5 silent block - 1150 x 600 mm approx. 100 kg A sieve chute is a component used in sandblasting systems to sieve blasting media. It separates larger particles from the finer grain size before the blasting media is reused and is part of the recovery system, where blasting media is collected, sieved and returned to the cycle after blasting. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the ...

Max. saw blade diameter: 420 mm Cutting height: 170 mm Mitre range swivel with digital display: 45°-90°-25° Miter range tilt with digital display: 90°-45° Hydraulic feed brake Pneumatic material tensioners Saw blade spraying device Hand crank for tilting

Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Key data: 400 mm, 4800 mm, 870 mm

Metora MBS 400 - Metal Band Saw - Hydraulically controlled lowering of the saw frame - Hydraulic raising of the saw frame - Mounted on turntable Specifications - Capacity: 400 mm - Working height: 870 mm - Saw blade dimensions: 4800 x 34 x 1.1 mm - Motor power: 3.2 kW - Machine dimensions WxHxD: 2600 x 1550 x 1200 mm - Weight: approx. 1300 kg

Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200

: 400 mm weight: 1,3 t miter: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Table size: 1100 x 900 Flywheel size: Ø 900 Saw blade: min. 6200 - max. 6400 mm Installed power: 5 HP

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

Code: 0246 Brand: OMGA Model: TR 2B NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Sawblade tiltable: - ° cutting width: - mm Motor output: - kW Cutting height: - mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An Inova saw for cutting paper cores is available. Paper core length range: 50mm-2000mm, paper core inner diameter: 400mm-500mm, wall thickness range: 15mm-30mm, max. payload: 30kg. Machine dimensions X/Y/Z: approx. 3500mm/1000mm/1850mm, weight: approx. 1600kg, control: Siemens HMI. Dokumentation vorhanden. An on-site inspection is possible.

Dimensions (L/W/H): 2200x1800x1250 mm Weight: 1700 kg Total power requirement: 23,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.