sa 800 used for sale

H.I.T. NSM 250 RESAWING SAW WITH WOOD FEED FROM THE LEFT (LEFT-HAND MACHINE). The system was fully functional until it was professionally dismantled and dismantled. In addition to the resawing saw with side fabric capping, a model turner, an alignment and centering table and a splitter separation transport included. Specifications Cutting height: 40 - 240 mm Cutting width: 18 - 400 mm / 5-leg variable Width unedged: 750 mm Lengths: 2.50 - 14.00 m Feed: max. 60 m/min Swivel circular saws for side goods cutting with 2 x 7.5 KW motors Saw drive with 2 x 132 KW motors Errors in the information excepted.

Length of the rolling table: ca. 2280 mm Saw blade diameter: ca. 400 mm weight: ca. 900 kg Parallel stop: Stop sliding table: 1550 mm with mitre rail incl. side stop extension to 1000 mm Star delta circuit has been renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: max 400 mm : mit Sägeblättern weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OptiGrind GU18 Double Grinder 0.45kW 230V 50Hz Grinding wheel 175mm x25mm Speed 2850 rpm G&STÜ-3101510

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

SPECIFICATIONS: Saw blade spacing: max. 2800 mm Tilt: 0° - 90° Saw blade: Ø 350 mm Installed power: 2.2 kW x 2

Long-cutting saw for cutting aluminium profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Feed length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2

A horizontal double-column bandsaw Behringer is available. Cutting range round material: 340mm, cutting range square material: 340mm/340mm, cutting speed: 120m/min, saw band dimensions X/Y/Z: 4860mm/32mm/1.1mm, machine dimensions X/Y/Z: approx. 3250mm/2600mm/1650mm, weight: approx. 2500kg. An on-site inspection is possible.

saw blade diameter: 320 mm cutting diameter: 140 mm stroke: mm total power requirement: 3 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting capacity: round material 90°: 260mm, flat material 90°: 300mm/260mm, round material -45° to 45°: 200mm, round material 60°: 165mm, saw band dimensions X/Y/Z: 2910mm/27mm/0.9mm, cutting speed: 110m/min. Machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto CompactControl, operating hours: approx. 200h. The machine control has been renewed. Documentation available. An on-site inspection is possible.

An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible.

Key data: 1060 mm

Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...

Max. diameter of the cut material ... 200mm Main engine power... 2.2kW Machine weight ... 170kg

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg

cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

P445 - used approx. 35 m³ / 35,000 L polyester tank, GF-UP tank, Staffelstein tank, standing on flat bottom. Technical details: Content: approx. 35 m³ / 35,000 litres Material: Polyester / GF-UP Manufacturer: Staffelstein Theodor Vanck Dimensions: approx. Ø 3.00 m × H Tank 5.20 m / H total 5.70 m Other: Used polyester tank, professionally cleaned and in good condition. Vertical GF-UP storage tank on flat bottom, dome on top of the roof, several inlets and outlets. Former salt brine tank. Roof was repainted. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, etc., or as a rainwater collection tank. Price on request. Transport can be organised at a reasonable price. It is not possible to update all of our listings on a daily b ...

Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible.

Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg

Perkin Elmer Headspace Sampler HS 40XL, Headspace sampler for 40 vials

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x  ...

Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg

Length of the rolling table: ca. mm Saw blade diameter: ca. 400 mm weight: ca. 900 kg Parallel stop: Stop sliding table: 1460 mm with stop extension to 2840 mm Star delta circuit has been renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 150 x 110 mm capacity 45 degrees: flat: 120 x 100 mm engine output: 1,8 / 2,6 kW : 500 mm weight: 450 kg dimensions: ca. 1100x710x1850 m Semi-automatic vertical cold circular saw with pneumatic clamping and feed device 4 saw blade speeds (2 via motor / 2via gearbox: 11/22/44/88 rpm integrated coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm cutting diameter: 70 mm tiltable up to: 45 Grad dimensions of the machine ca.: 3.5 x 0.6 x 1.8 m weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connected loads: 220 V, 50 Hz, 6 A Strokes per minute (RPM): 5 - 30 Power drive motor: 0.55 kW Condition: fully functional, well-kept Availability: as of now

Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand

Key data: 500 mm, 45 °

The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.

Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible.

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod

cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.62 m, Overall length= 0.76 m, Overall width= 0.76 m, Net weight= 480 kg,

Height=1.02 m, Overall length= 0.55 m, Overall width= 0.45 m, Net weight= 75 kg,

Height=1.2 m, Overall length= 0.4 m, Overall width= 1 m, Net weight= 120 kg,

Height=1.16 m, Overall length= 0.48 m, Overall width= 0.52 m, Net weight= 132 kg,

Height=1.1 m, Overall length= 0.5 m, Overall width= 0.62 m, Net weight= 140 kg,

Height=1.16 m, Overall length= 0.55 m, Overall width= 0.68 m, Net weight= 138 kg,

Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 138 kg,

Height=1.26 m, Overall length= 0.55 m, Overall width= 0.75 m, Net weight= 230 kg,