sa 800 used for sale

capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 125 mm : 127 x 125 mm dimensions of saw-band: 1435 x 12,7 x 0,65 mm band speed: 38 - 80 m/min total power requirement: 0,95 kW weight of the machine ca.: 18 kg dimensions: 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...

cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.  ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Loading trolley for all Vollmer ND loading centers available in as-is condition, unpainted or completely new and freshly painted.

Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring., Circular saw blade diameter: 200 - 840mm, Circular Saw Bore Diameter: from 16 mm, Tooth pitch: 6 - 180mm, grinding path: up to 25 mm, tangential relief angle: 0 to 10 degrees, max. grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding spindle variable: 1600 - 5500 rpm,, Conn ...

A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.

Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible.

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device

Manufacturer : MKW Model : 50/SFT 350 Short Description: Stitcher

Offer 25115 Radial arm - Schiffterschnitt - Pendulum train saw Specifications: - Saw blade diameter 400 mm - Saw blade speed 3000 rpm - Cutting height up to approx. 125 mm - Cutting depth up to approx. 600 mm - Mitre adjustable in 2 axes - Table size approx. W 800 x D 800 mm - Table height 920 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 800 x H 1900 x D 1100 mm - Weight approx. 200 kg

Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition

Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition

Sale EXW ex works No shipping included

Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:

Offer 25114 Technical data approx.: - Roll diameter 500 mm - Projection 500 mm - Max. passage height 400 mm - Table size 630 x 530 mm - Table swivel 10 / 30 ° - Table height from the floor 950 mm - Saw blade length approx. 3900 mm - Saw bandwidth approx. 3 - 25 mm - Cutting speeds ( presumably ) 81 – 145 – 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space requirement approx. W 750 x H 2000 x D 1000 mm

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Afkortmachine met één kop en oplopend mes voor het zagen van grote secties, ontworpen voor 90° snijden. Een opvallend kenmerk van dit product is de optimale kwaliteit van het snijvlak, gecombineerd met herhaalbaarheid en nauwkeurigheid. De mesaanvoer is pneumatisch. 2 verticale pneumatische klemmen 2 horizontale pneumatische klemmen max. vlak werkstuk: 600 x 50 mm max. rechthoekig werkstuk: 150 x 340 mm / 200 x 280 mm Dia saw / abrasive - disk : 650 mm Power needed / motorpower: 5,5 kW

Key data: 2580 mm, 150 mm

BOERE KSM 1 Edge Grinding Machine Brand: BOERE Type: KSM-1 M-No.: Year of Make: 2006 Data: Length of work tables: 900mm Width of work tables: 400mm Table level: Height adjustable Dimensions: 1,7007501,250mm Scjhleifa unit inclination: 0-60° Abrasive belt: 2580150mm Grinding spindle: ø mm Main drive: 2.2 KW Oscillatation sanding belt: 0 - 25 mm - 0.37 KW Weight: 260 KG Press: 6 bar

Centauro Slitting Saw Type SLG 8000 Year of construction: 2011 Cutting length max. 8000 mm Cutting width max. 1900 mm Cutting height max. 160 mm Motor 11 kW with laser light with pressure beam

Key data: 300 mm

SPECIFICATIONS: Saw blade: Ø 300 mm Installed power: 2.5 HP Voltage: 380 V EQUIPMENT: 01 Workbench

Key data: 46 °, 3 mm, 1 mm

MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic:  ...

Düperthal Safety Cabinet Type 90 W x D x H 120 x 60 x 206 cm Price incl. VAT You will receive an invoice with VAT. Shipping possible !

Key data: 46 °, 3 mm, 850 mm

Martin T60C Sliding Table Saw Brand Martin Type T60C M-No.: V482223 Year of Make: 2008 Control panel: touchscreen integrated at eye level in the extraction support 2-axis control (saw height, inclination, cutting width with handwheel adjustment but with digital readout of the cutting length in the screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivel: 0° - 45° Speed control: 4,000/4,800/6,000/tpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 850 mm, handwheel adjustment with readout in the screen and +/- 0.05 mm accuracy Table: galvanized steel with fixed-angle stops 0º, 22,5º, 30ºen 45º. Dimensions: 1,340650mm Length stop: 2,200 - 3,300 mm with analogue readout, folding latch with magnifying glass Suction: Top: ø100 mm, Bottom: ø120 mm Weight: 1,400 KG

A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.

Key data: 45 °, 3 mm, 2 mm

SCM Si400 Vanguard Sliding Table Saw with Touch Screen 3-Axis Control, Mitre Landing Table Mark SCM Type SI400Vanguard M-No.: Year of manufacture 2004 Control panel: 12" touchscreen at eye level, start-stop trolley Control: 3-axis CNC control 1st cutting height 2. Saw blade tilt 3. Cutting width Memory: 999 memory positions, 6 cuts per program, auxiliary function with graphical display, collision warning Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3,000-4,000-5,000 rpm Cutting height 130 mm. (Saw blades. 400 mm-90°, 92 mm- 45°.) Saw blade swivel 0 - 45° Scoring ø120 mm 2-axle control: 1. Cutting height (radial) 2. Cutting height (axial) Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Landing table: Vanguard walking table with digital angle display +50° to –50° Anodize ...

Key data: 45 °, 3 mm, 2 mm

SCM SiI400N Sliding Table Saw Mark SCM Type SI400N M-No.: AB/127843, 071528 Built in 1999 Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3000-4000-5000 tpm. Cutting height 130 mm. (Saw blades. 400 mm.) Saw blade swivel 0 - 45° Scoring ø mm, ID: 20 mm Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Lay-down table: steel Lay-down table with licence for angle cuts Length stop anodized aluminum with 2 flaps Control panel Digitale-analoge zaaghoogte aflezing Condition Fully functional, very SCM maintained

Key data: 45 °, 3200 mm, 1250 mm

Rema DMMC Sliding Table Saw Brand Rema Type DMMC40 M-No.: Year of Make: 1995 Main saw: max. ø400 mm, cutting height: 130 mm, saw blade inclination: 0° - 45° Scoring Saw Yes Speed control: 2,800/4,000/5,500 tpm Motor: 5.5 KW Edging table 3,000 mm Cutting width: 1,250 mm Length stop: 2-point length stop 2,200 - 3,300 mm Landing table: With fixed mitre anchorage points Suction: Top: ø80 mm, Bottom: ø140 mm Weight: 900 KG

Cutting range round: 170 mm Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Belt speed: 150, 355 & 95 m/min Saw drive: 380 V, 0.75 kW kW Space requirement: 1400 x 600 x 800 mm Weight: 340 kg

A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm Control: total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom Roller conveyors optional Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the us ...

Part Number 7674 SPECIFICATIONS - max diameter of the main saw blade 300-450mm - height of the main saw blade adjustment vertically - for saw blade ⌀300 0-75mm - for saw blade ⌀350 0-100mm - for saw blade ⌀400 20-125mm - for saw blade ⌀450 45-150mm - 45° height of the main saw - for saw blade ⌀300 0-50mm - for saw blade ⌀350 0-70mm - for saw blade ⌀400 12-85mm - for saw blade ⌀450 30-105mm - Circular saw blade tilt 0-45° - sawing length with the help of an auxiliary table - with a strip set at the back of the table for a movable table 300 = 3200mm - cutting width with guide 50-1750mm - Extension (from – to) 1965-3200mm - bumper with digital readout 50-1630mm -Max. distance between the longitudinal guide and the saw 1400mm - main motor power 6kW - undercutting spindle motor power 0.75kW - Saw blade diameter of the scoring spindle 120-130mm - ...

Part Number 7668 SPECIFICATIONS - Track width 250mm - shaft width 450mm - max blade diameter for multi-rip blade 350mm - max blade diameter for the edger 350mm - blade bore diameter 80mm - max cutting height for multi-rip saw 120mm - max cutting height for the edger 100mm - table top width with clearance 900mm - table top length 1770mm -in advance: - Flingers - roller, pressure, slip, metal, smooth - Flingers - pressure roller, slip roller - shaft with saws - pressure roller, slip, metal 2 pcs - from below: - guide strip - Flingers -caterpillar - central lubrication - Infinitely variable feed speed - feed motor 1.1kW - main motor 22kW - total dimensions length/width/height 2200x1600x1800mm – weight 1900kg – made in Germany – roller with a floating disc for edging – used multirip saw, very good condition Net price: 54900 PLN Net pric ...

Part Number 7670 SPECIFICATIONS - Track width 340mm - shaft width 400mm - max blade diameter for multi-rip blade 350mm - blade bore diameter 80mm - max cutting height for the edger 100mm - max cutting height for multi-rip saw 120mm - table top width with clearance 900mm - table top length 1780mm -in advance: - Flingers - roller, pressure, slip, metal, - Flingers - pressure roller, slip roller - shaft with saws - pressure roller, slip roller - metal slip shaft, pressure shaft - from below: - guide strip - Flingers -caterpillar - central lubrication - Infinitely variable feed speed - electric shaft lifting with saws 0.75kW + body 1.1kW - feed motor 1.5kW - main motor 22kW - floating saw travel 0.55kW - lasers (not working, to be reviewed) - extraction spigot diameter 210mm - total dimensions length/width/height 2200x1450x2000mm - weight  ...

Manufacturer: LASM Model: LS-2N1A Year of Manufacture: 2001 Type of Machine : profile sander with 2 sanding belts and one abrasive wheel station Technical Specifications: - Max workpiece thickness: 80 mm - Min workpiece length: 100 mm - Overall Dimensions: 4400 × 1400 × 1900 mm - Net Weight: 1200 kg Sanding Belt Units (x2): - Two-speed motor - Unit articulation: 135° - Belt dimensions: 80 × 2450 mm - Belt speed: 7–14 m/sec - Pneumatic belt tensioning - Mechanical oscillation - Pad movement timer (exit/return) - Air blowing system (belt cooling & cleaning) Abrasive Wheel Unit (x1): - Single-speed motor: 2 HP - Unit articulation: 180° - Max wheel diameter: 220 mm - Shaft motor diameter: 30 mm - Feed track speed: 5–25 m/min (variable) Find more here - / Contact us at -

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A

Stock number: A185, Tube heat exchanger, stainless steel,, OY Sanatasalo Sohlberg AB., Material: Stainless steel AISI 304

Stock number: F864, Digital scale, stainless steel,, Sartorius, ISI10., Weighing scale 0-30 kg., Interval 1 g., Tara function., Weighing plate: L 500 x W 400 mm., Material: Stainless steel AISI 304, Weighing area: 0-30 kg., Interval: 1 g.

Stock number: F884, Digital scale, stainless steel,, Sartorius X5 system controller., Weighing area 1-1000 kg., Interval 1 kg., Tara function., Standing on leg rack., Frame 940 x 940 mm., Digital wall display., Material: Stainless steel AISI 304, Weighing area: 1-1000 kg., Interval: 1 kg.

Stock number: F464, Digital scale, stainless steel,, Sartorius type I24000P-SD2., Max 24,2 kg. min. 50 g. interval 1 g., stainless, weighing plate L 300 x W 230 mm., Standing in stainless rack with printer,, type Star DP8340., Material: Stainless steel AISI 304, Weighing area: 50 g.-24,2 kg., Interval: 1 g.

Stock number: D560, Digital scale, Sartorius 3808 MP,, Weighing 0 - 30 kg., Interval 0,1 g., Stainless weighing board 300 x 400 mm., Weighing area: 0-30 kg., Interval: 0,1 g.

100 litre, Stock number: D1185, Litre: 100, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 440 x D 450 x H 500 mm., Outer dimensions: W 570 x D 660 x H 625 mm., Temperature: Max 200° C, Power: 230 Volt - 1030 W., Shelf: 2 pcs., Manufacturer: Salvis, Model/type: TC-100 S

Stock number: SF054, Proces filter, stainless steel,, Sartorius type SM 340 02., Max 10 bars., Max 180° C., Vol. 4,2 l., Ø 1 clamp connection., Excl. filter cartridge., Material: Stainless steel AISI 304

10.000 litre, Stock number: T3838, Tank, stainless steel,, closed top, standing on legs., Double jacket., Dished top and bottom,, tank cover in the top., Flange for agitator in the top centre,, Ø 2200 mm., Litre: 10.000, Material: Stainless steel AISI 304

SAMMELHEFTER STITCHING MACHÄ°NE ST 100, 6 STATION OHNE UMSCHLAGSTATION

10.000 litre, Stock number: T3839, Tank, stainless steel,, closed top, standing on legs., Double jacket., Dished top and bottom,, tank cover in the top., Flange for agitator in the top centre,, Ø 2200 mm., Litre: 10.000, Material: Stainless steel AISI 304

Band Sawing Machine MEP SHARK 281, Information about technical data are not binding., Machine available subject to prior sale., Max cutting capacity Ø: 250 mm, Max cutting capacity: 280x200 mm, Blade dimension: 2950x27x0,9 mm, Band speed range: 36 - 72 m/1, Blade motor power: 1,5 - 1,8 Kw, Working plane height: 950 mm, Weight: 370 Kg

Key data: 45 °, 3300 mm, 850 mm

Martin T72A sliding table saw with: hydraulic saw height and digital display at eye level Hydraulic saw blade swivel and digital display at eye level Handwheel adjustment of the cutting width and digital display at eye level Parallelogramtic for angular sections -46° to 46° and digital readout Scoring saw Brand MARTIN Type T72A Comfort Year of Make: 1999 Control panel eye level integrated in the extraction support (saw blade height, inclination, cutting width) Saw blade height adjustment: Hydraulic with digital display in the screen 0-170 mm Saw blade tilt: Hydraulic with digital display in the screen 0- 46° Parallel stop: handwheel adjustment with digital display in the screen Saw hood: Electric height adjustment of the hood Manual move to the right for oversize products to saw Landing table: Aluminium parallelogramtisch +/-46° miyt digital angle display Leng ...

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; Brand MARTIN Type T72A M-No.: V238101 Year of Make: 1997 YouTube: Control panel at eye level integrated in the extraction support Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Landing table: parallelogram cross table Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with digital 2-point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2800/4000/5500 rpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 1,250 mm Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 1,600 KG

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; 3-axis electric scoring adjustment Brand MARTIN Type T72A Aut Year of Make: 1997 Control panel: At eye level in the extraction support, integrated with 3-axis NC control, electric saw hood, height adjustment and 3-axis scoring Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Saw hood: Electric height adjustment Landing table: Steel (galanized) with fixed detent points for mitre angles 0°, 22.5°, 30° and 45° or freely selectable intermediate interlocking angles Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with 2 point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2000/275 ...