136,901 used machines on RESALE, but how to find them? Machine Search
Useful width: 1030 mm. Sanding belt sizes: 1060 x 1900 mm. Number of sanding units: 2 Max. pass in thickness: 200 mm. Feed speeds: 5 and 10 m/min Motor feedbelt: 3 kW Pneumatic belt tensioning and oscillation Motorised height adjustment, motor 0,75 kW, readout up to 1/10 mm. Automatic thickness adjustment Diameter extraction: 250 mm.
Sanding width: 650 mm. Sanding belt sizes: 650 x 1900 mm. Number of sanding units: 2 Roller 11 kW, Pad 7,5 kW Max. pass in thickness: 200 mm. Feed speeds: 5 and 10 m/min Motor feedbelt: 2,2 kW Pneumatic belt tensioning and oscillation
Top and bottom sander Usefull width: 435 mm. Sanding units top: Roller 7,5 kW, Pad 5,5 kW bottom : Roller 7,5 kW, Pad 5,5 kW Sanding belt sizes: 455 x 1900 mm. Workpiece thickness: 5 - 200 mm Min workpiece length: 320 mm. Feed speed of the carpet: 8 and 16 m/min, motor 2,2 kW
Usefull width: 1030 mm. Sanding belt sizes: 1060 x 1900 mm. Number of sanding units: 3 Roller 15 kW, Roller 15 kW, Pad 11 kW Max. pass in thickness: 200 mm. Feed speeds: 5 and 10 m/min Motor feedbelt: 2,2 kW Pneumatic belt tensioning and oscillation Motorised height adjustment, motor 0,75 kW, readout up to 1/10 mm. Automatic thickness adjustment revision in 2017
Table sizes: 3000 x 850 mm. Motor: 3 kW Belt sizes: 150 x 7800 mm. Motorised height adjustment
Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1
from training workshop - public institution used, top condition, little used make Johannsen type T 94 year of manufacture 1996 machine no.No. 21397 GS wood dust tested sanding length approx. 2600 mm sanding width approx. 850 mm belt length approx. 7800 mm x 150 mm cranking right approx. 550 mm electric adjustment upper belt cover upper sanding support belt speeds 22 m/sec. right-left run suction connection D 180 mm left space requirement approx. 2200 mm x 4050 mm weight approx. 700 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty
Sand Drainage Manufacturer: CDE Type: Hydrocyclone Year of Make: 2021 Operating hours 428 h Drive: Electric Location: NRW Price from location:
Voran / MAS-Germany GmbH sausage cutter, type: SB Cut, series: 203, order number: 2140004, year of construction: 2022, 400 V, 3 Ph, 50-60 Hz, 1.5 kW, dimensions: 1655 mm x 750 mm x 1440 mm.
ViscoFood b.v. mobile product pump for Sancassiano GCE620 mixing tubs, model: UTL-POMPLIFT-2310, serial number: 2310, year of construction: 2023, working diameter: Ø 1100 mm, total dimensions: 1400 mm x 1400 mm x 2300 mm.
saw blade diameter: 350 mm cutting diameter: 120 mm capacity 90 degrees: square: 110 x 110 mm capacity 90 degrees: flat: 140 x 110 mm capacity 45 degrees: flat: 140 x 90 mm total power requirement: 2,6 kW weight of the machine ca.: 0,5 t dimensions of machine L x W x H: 0,95 x 1,38 x 1,85 m Accessories: 1 used sawblade 350 mmø, coolant - with hydr. clamping of workpiece and hydr. feed of sawblade - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-50846-313
Includes dummy scratch cards. Auction-ID: A1-50667-69
cutting diameter: 460 mm saw band length: 5334 mm cutting width: 1,3 mm cutting range - square -: 320 x 320 mm cutting range - flat -: 500 x 320 mm control: minipos 807 cutting speed: 16 - 80 m/min dimensions of saw-band: 5334 x 41 x 1,3 mm feed length: 580 mm feed length: multiple: 5800 mm total power requirement: 8 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 235 mm dimensions of saw-band: 2480 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 750 mm cutting width: 170 x 310 mm cutting speed: 25 - 90 m/min : 130 mm : 130 mm : 205 mm Impact energy: 205 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sandblaster GLASNER Working is OK Equipped with one filter Voltage: 380 V Internal dimensions: Width 590 mm x Depth 470 mm x H 400 mm Width: 1000 mm Depth: 1500 mm Total height: 1800 mm Weight: approx 400 kg
Saw blade Ø: 360 mm Cutting range at 90° round: 110 mm Cutting area at 90° rectangle: 110 x 400 mm Cutting range mitred at 45° round: 110 mm Cutting area mitred at 45° rectangle: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space requirement: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg
Auction-ID: A1-50656-138
SPECIFICATIONS: Installed power: 2.2 kW Automatic saw blade return Automatic lubrication
SPECIFICATIONS: Installed power: 1.8 kW Voltage: 230 V Saw blade: Ø 380 mm
Key data: 4100 mm, 80 mm
Holzma Panel Saw Cutting Length 4100mm Cutting Depth 4500mm with Vorritz Agregat Machine works perfectly
Code: 0501 Brand: COLOMBO FILIPPETTI Model: VARISPEED VS 85 - CE Standard Professional scroll saw , high performance and cutting precision – CE Standard It is ideal for inlay work on wood, plywood, plastics and light alloys in the fields of arts and crafts, model-making, DIY, joinery, and technical and vocational colleges Extremely quiet operation Single-phase 220 volt motor 0,55 kW Blade tension is easily adjustable Electronic speed variator controlled by a foot-operated potentiometer, from 0 to 1500 rpm Large and sturdy work surface tiltable up to 45°, mm 600 x 600 Useful working length 850 mm Max cutting thickness 45 mm (blades 130 mm ) 65 mm (blades 150 mm) Dust extraction connection Overall dimensions mm 1400 x 610 x 1560 h Weight kg 140
saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: flat: 330 x 40 mm capacity 45 degrees: round: 140 mm capacity 45 degrees: flat: 250 x 40 mm cutting speed: 10 - 70 m/min saw head feed: 0 - 1000 mm/min sawing motor: 1,7 / 2,6 kW weight of the machine ca.: 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. saw length: 6,000 mm Max. saw blade diameter: 500 mm Automatic positioning via Diamond control of length and angles Swivelling of the angles inwards and outwards possible (20-135°) Moving roller conveyor Soundproof booth Minimum quantity spraying device Chip conveyor belt Weight: approx. 2,800 kg
Specifications: - Saw blade dimensions 315 x 2.5 x 32 mm - 2 saw blade spindle speeds approx. 40 + 80 rpm - Cutting range at 90° around 95 mm - flat 110 x 70 mm - at 45° around 90 mm - flat 85 x 70 mm - Mitre adjustable left + right up to 45 ° - Material vise - Drive 400 V / 0.75 / 1.3 kW - Space requirement approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg
maximum number of results exceeded
please refine your search
9.500 € 
