sa 800 used for sale

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: NE3 350x3.2x32Z=108neg -Speed: n max. 5000 rpm -Use: non-ferrous profiles/plastics -Quantity: 2x saw blade available -Price: per piece -Dimensions box: 385/385/H10 mm -Weight: 1,9 kg

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the end of the carriage. Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 3 ...

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Bundle clamping device manual

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Scoring circular saw blade, Scoring circular saw blades -Manufacturer: KBK, circular saw blade type 160x4.1-5.2x30 Z 28 -Carbide tipped -Box dimensions: 260/230/H60 mm -Weight: 1.2 kg

Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device -Manufacturer: pilz, safety relay safety switching device -Type: PNOZ 1 24VDC 3S10 -Id.no.:475695 117758 -Number: 1x relay available -Dimensions: 110/90/H80 mm -Weight: 0.4kg

Circular saw Frommia 630 Length 1.20 m Width 1 m Height 1 m Attack Roller table Saw blade

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Band saw JAESPA AS8 Blade length 5300 - 5500 mm Width 34 mm 16 A 380 V Length 1.50 m Width 1 m Height 2.50 m Tiltable table Speed indicator

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

2x BST 10, BBP-T, PA-t, TR-t, EGR-t

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, band saw, cold circular saw -Roll height: 570 to 970 mm -Roll: Ø 52 x 355 mm -Dimensions: 500/420/H570 mm -Weight: 14 kg

2x BST 10 - EGR-t - PA-t - BBP-t - TR-t

safety switch, safety switch, protective grille switch -Manufacturer: Euchner, Safety Switch from vertical lathe Scherer VDZ 80 DS -Type: TZ1LEO24SR11 -ID.No.: 070828 -Technical data: see photo type plate -Dimensions: 175/110/55 mm -Weight: 1.7 kg

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cycles/Hour, 6 Feeder Stations, 3x DVU 400 Vertical Feeder, 3x DHU 400 Feeders, 1x CHU 450 Cover Feeder, Stiching Unit ST 400 with 2 Stiching Heads, Three Knife Trimmer TR400 with Stacker Delivery

Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT

saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 904-37 -Type: Ø 340x5.0/3.5 x 45 Z 108 = T 9.89 -Art. No.: 1010-1081894X HW -Speed: n max. 5400 rpm -Number: 7x saw blade available -Price: per piece -Dimensions box: 410/410/H10 mm -Weight: 2.6 kg/piece

saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 904-12 -Type: Ø 400x3.5/2.8x60 Z 72 = T 18.32 -Art. No.: 0211-5107670X HW -Speed: n max. 4300 rpm -Number: 3x saw blade available -Price: per piece -Dimensions box: 490/490/H10 mm -Weight: 3.2 kg/piece

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Mitre saw Brand: Graule Type: H8 J2 169 saw blade Ø 250mm swivable saw blade 45 °

Mitre saw Brand: Hebö Type: TA 131 Year: 1999 technical data: adjustable +/- 45° 400 V, 50Hz saw blade Ø approx. 400 mm 2 clamping cylinder extended workpiece support left- / right side each 840 mm 2 stops Note: The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank, Ø 925 x 9 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 860 x 5 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 22 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 1040 x 7 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 53 kg

cutting diameter: 355 mm dimensions of saw-band: 3770 x 34 x 1,1 mm cutting speed: 20 - 80 m/min cutting width: 490 x 280 mm : 290 mm Impact energy: 250 mm : 230 mm : 180 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions: 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 885 x 6 mm -Inside: Ø: 80 mm -Hole circle: Ø 160 x 25 mm / Ø 120 x 22 mm -Number of teeth: see photo -Weight: 24 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 865 x 6 mm -Inside: Ø: 80 mm -Hole circle: Ø 160 x 27 mm / Ø 125 x 17 mm -Number of teeth: see photo -Weight: 22 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 880 x 7 mm -Inside: Ø: 80 mm -Hole circle: Ø 160 x 27 mm / Ø 120 x 21 mm -Number of teeth: see photo -Weight: 24 kg

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 870 x 6 mm -Inside: Ø: 80 mm -Hole circle: Ø 160 x 27 mm / Ø 120 x 21 mm -Number of teeth: see photo -Weight: 30 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 23 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 815 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 28 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 23 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg

- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm

• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

Width of the feed carpet 300 mm Max saw blade diameter 350 mm min. cutting length 390 mm variable cutting speed, feed carpet speed adjustable 6-48 m/min Power 25,5 kw 35 hp 35 HP

Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 72, see photos -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photos -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6.5 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 12 kg