127,442 used machines on RESALE, but how to find them? Machine Search
Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg
Producer: INOTEC Type: WT97-RNSV Power: 2,5 kW Weight: approx. 400 kg Length x width x height: 998 x 850 x 1740 mm Sausage cutter INOTEC type WT 97 - RNSV , directly from the customer, without table - Caliber from 17 to 46 mm - Adjustable speed of 0.25 m/s up to 0.8 m/s Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
Multiple lengths saw FAS 14 with 2 circular saw units per 2.2 kW, 3 x 400 V, 50 Hz. -maximum piece length 6000 mm -maximum cutting height 120 mm -maximum Board width 500 mm -Working height 700 mm -Feed speed approx. 0.2 m / sec -Feed drive gear motor 0.55 kW / 3 x 400 V, 50 Hz Built about 1965 Weight 1600 kg Engine No. 314 Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg
High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine
Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750
Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850
slicer for curry sausage bandwidth: 300 mm, cuts for 12 mm construed.
used
MADO Perfekta-plus MKB 649 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET
used
Kolbe K 220 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Full frame saw Balfour boy with Chuck wagon Wood diameter of exceeding 60 cm Engine 55 kW L x W x H: 230 x 200 x 400 cm Weight approx. 8 to Built in 1958 Disassembly by buyer The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Kolbe K 300 band saw, stand-alone-version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg
Made in 1995 in Denmark. Machine No. 9585037. Made in 1995 Transport dimensions: 1800x620x2000 mm. Weight: 400 kg
Band saw Kirchner Roll á 800 mm Cutting height 300 mm L x W x H: 130 x 80 x 230 cm Weight approx. 750 kg Built in 1944 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Pendulum saws Bacus for wall mounting Saw á 500 mm Built in 1982 L x W x H: 70 x 60 x 100 cm Weight 370 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Rotary feeder, modern bottom opening station, CCS control system, 2 valve units, bottom patch with 2 colour tail end printers
used
Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 570 mm Motor output: 2,2 kW Table dimensions: 810 x 590 mm table height: 905 mm voltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mm Weight: 275 kg Dust suction hood: 2 x 100 mm band speed: 1550 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Best price 4500 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg
Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg
Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wheel diameter: 700 mm Cutting height: 420 mm cutting width: 680 mm Motor output: 3 kW Table dimensions: 695 x 990 mm Table tiltable: 45 Grad Dimensions (L/W/H): 1260x840x2270 mm machine weight ab.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg
Westphal Mechanics C7x Commutator Slot Center Machine No. M64127 Year of construction: 09/2019 The commutator slot center has four processing steps. In the steps, the following components are approached: Contact slot saw Insulating groove saw Deburrs Brush The Stäubli TS 80 Robotor with SP1 control has two grippers that transmit the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC More information via this link. Further technical data will follow shortly. The roller straightening unit is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, ...
Weibert S2 Format circular saw new Formatschiebetisch: 1600mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250 â 315 mm swivel: 90 °-45 ° WJ 700100 Options: Format table 1270 mm WJ-700101 Before scoring unit with motor 0, 75kW WJ 800105 Suction pipe with hose WJ 400104
1 ALLIANCE sample high temperature jet dyeing machine, type Colora HT10 capacity 4 to 10 kg (according to the weight and composition of the fabrics) year 1999 maximum dyeing temperature 140 ºC machine equipped with filter COMEUREG Microprog 40 dye cycle controller winch is ABB inverter controlled circulation pump is ABB inverter controlled with addition vat machine has worked very few hours and is in pristine condition
AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working conditions : Excellent CE mark : YES Instruction Book : YES with rollers tracks ( as in photo ) n.03 pneumatic stop with blade diam.mm.550 motor power Hp 7,5 volt. 380/50
Saeege leaf grinding machine Grinding diameter max 1000mm without the pictured seed leaf, very easy to use, purely mechanical without CNC or NC, but perfect! Operating instructions Further data is not available at the moment. Special price
SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good
Small compact Miltirip sawing machine KUSING RP - 200. Technical parameters: Power of the main motor : 7.5 / 11 kW Diameter of the shaft: 30 mm Length of shaft: 200 mm Power of the feed motor : 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 250 / 300 mm Maximum material height: 65 mm Minimum material length: 450 mm ( 250 mm on request ) Small compact Miltirip saw KUSING RP - 200. The machine is suitable for cutting material with low energy consumption. Suitable for cutting raw wood and semi-finished products. KuSING has been manufacturing woodworking machines since 1991. Machine in stock. The advertisement was automatically translated. Translation errors are possible.
1 ZELTEX laboratory high temperature dyeing machine type Colorstar CS1-F/2L, SEDO PC1000 dye cycle controller, for 6 inch bobbins
Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg
ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR ...
Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg
WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102
Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...
ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm ...
Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg
Type KAP 255XJL Cutting height 45?-90?: 80 mm Cutting height swing 45?: 40 mm Cutting lenght 90?: 430 mm Cutting lenght tilt 45?: 310 mm Motor power S1 1,8 kW Saw blade speed 4800 rpm HM-saw blade teeth 254x30x3 mm Transport dimensions 850x520x410 mm Weight 20 kg
Type USK 1710 Payload 150 kg Measurements (91-171)x60x(59-82 cm) Table size 60x46 cm Weight 15,5 kg
Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5 ...
Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg
Band saw Hunziker Roll ø 800 mm 3.5 HP engine Built 1952 Weight approx. 730 kg L x W x H: 120 x 100 x 230 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
maximum number of results exceeded
please refine your search
