sa 800 used for sale

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

M. No.: 2067 Working width max. (mm): 800

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

impressions: 0 Mio. max. printing speed sheets: 1800 /h max. paper size: 30 x 45 cm max. speed: 1800 in A4 /h max. speed: 900 in A3 /h serial no.: 280000960 Dimensions (L/W/H): 180/105/170 cm weight: 450 kg digital printing system for colour prints The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. film width: 356 mm max. speed: 338 qcm/min Dimensions (L/W/H): 85x75x100 cm repeating accuracy: 25 µm material: Materialvorrat 76 m weight: 162 kg max. exposure length 2000 mm Resolution max. 2400 dpi red laser diode 670-680 nm point sizes 20-35 µm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used roasting/baking oven from Food Design Applications – Ireland Model: MSOG/2-100/800 Burners: Lanemark International Heating power: two burners: 2x 170kW = 340kW It is possible to connect steam. It can also work as a cooler, dehumidifier Two independent zones Electric blow height adjustment Electric blowing force adjustment Electric belt speed control Direct wash possible Indirect heat distribution system (tubular heat exchanger) Lower waste tray Stainless Tape, Braided with Belt Tensioning System Complete stainless steel chimneys, including exhaust gas control fans Natural gas Dimensions: Chamber (tunnel) height (adjustable) max. 250mm Tape width 950mm Belt width – working space 920mm Length of the whole machine 10250mm Baking Length 8000mm Machine width 2030mm Height with motors 3250mm Acid-resistant design.

Transnorm conveyor belt GF 800-600-500 RA2192 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1,0 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 1,0 scope of delive ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4250 ( 8 ...

Transnorm curved belt conveyor right bend 45°-800-700 IR900 RA2140 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adjusta ...

Transnorm Rising falling Incline with forerun belt conveyor GF 4780+800-700-600 RA2103 Technical data: Conveyor length (NL): 5580 mm (800 mm forerun + 4780 mm incline ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5580 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...

Transnorm roller conveyor TS 2800 sorter switch 1980-1250-1150 RA1999 Make: Transnorm Roll width (RB): 1150 mm Nominal/outer width (NB): 1250 mm Length: 1980 mm Diameter rollers: 50 mm distance between rollers: 76 mm Roller conveyor motor: 2x SEW drive motor Angle of the rollers is adjusted pneumatically (see pictures) conveying speed: approx.1,73m/s maximum recommended box/package width: 400 mm Theoretical sorting speed at 600 mm crate length: ca. 4250/h Included: Side guide included on one side Control valve Optionally available: Supports Side guides on both sides Conversion to box width up to 500 mm Barcode scanner Control system (stand-alone unit) System optimization (e.g. replace valves, dual solenoid valve, forward conveyors, frequency converter) for higher flow rate 6000 and more Features: For individual, expert advice, simply get in touch with us. Simply contact us by phone or ...

Transnorm curved belt conveyor right 90°-800-600-IR600 RA2162 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in  ...

The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...

PEDDINGHAUS Hydraulic 800 hydraulic punching machine was manufactured in Germany by Paul Ferdinand Peddinghaus GmbH. This highly reliable machine is used for the precision machining of angle bars and flat bars. It enables the punching of square and round holes in structural steel workpieces with a maximum thickness of 25 mm. The machining process is performed with a high press force of up to 80 tonnes by means of punches. The perfectly balanced design of the machine maintains excellent stability even during the most intensive challenges. All of this makes the PEDDINGHAUS Hydraulic 800 an excellent addition to industrial facilities and locksmith workshops. The total weight of the machine is approximately 1500 kg. Technical specifications of the PEDDINGHAUS Hydraulic 800 punching machine General data - maximum press force: 80 t (800 kN) - throat depth: approx. 200 mm - working heigh ...

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, 2 doors, solid construction -Width: 800 mm -Depth: 630 mm -Height: 1790 mm -Shelves: See photos for layout/height -Weight: 100 kg

Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2116 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of ...

Transnorm curved belt conveyor right bend 90°-800-700 IR900 RA2118 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,29 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: without support ...

Transnorm Rising falling Incline with arch belt conveyor GF 1115+800-700-600 RA2228 Technical data: Conveyor length (NL): 1915 mm ( 1115 mm incline + 800 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DRS71M4/MM05 Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1915 ( 1115 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eur ...

Transnorm inclined inlet Rejector Rejector Roller spiral 45°/90°-900-800 RA2236 Year of construction: 2008 Conveying angle (WZ + WR): 45° + 45° Mean length (ML): 1150 mm Nominal/outer width (NB): 900 mm Effective width (NUB): 800 mm Conveyor speed: please contact us Roller diameter: 50 mm steel + conical plastic-coated rollers Drive: SEW geared motor Electrical data: 0.55 kW, 380-480 V Center distance: 75 mm Overall height: 120 mm, 450 with motor Overdrive with chain Optionally available: Supports Lateral guide on one and both sides Frequency converter for infinitely variable speed control Ball roller table for infeed and outfeed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Construction year: 2008 angle: 45°, 90° nominal voltage: 380-480 V Nominal / outside width in mm: 900 Roll width in mm: 800 Roll division i ...

X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -

Lippert belt conveyor GF 800-700-600 RA2249 Technical data: Conveyor length (NL): 800 mm Frame width (NB): 700 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.37 / S1 Idler pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail ...

Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3850 ( 3050 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...

Transnorm belt curve conveyor 30°-800-700 IR900 right RA2256 Technical data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 30° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Overall height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor, SA42 DT71D-4 Electrical data: 380-500 V, 0.37 kW Conveying speed: please contact us Scope of delivery: without supports (please enquire if required) Optional: Supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1992 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte  ...

Lippert rising falling Incline belt conveyor GF 800+6450+5550-750-600 RA2128 Technical data: Conveyor length (NL): 12800 mm ( 800 mm forward run 6540 mm ascending belt + 5550 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 12800 ( 800 + 6450 + 5550 ) Nominal / outside width ...

Lippert rising falling Incline belt conveyor GF 800+10500+2730-750-600 RA2132 Technical data: Conveyor length (NL): 14030 mm ( 800 mm forward run + 10500 mm ascending belt + 2730 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 14030 ( 800 + 10500 + 2730 ) Nominal / outside width in mm: 750 ...

Ekomex Vacuum Tumbler is a professional vacuum tumbler designed for marinating, curing, and massaging meat products. The vacuum process ensures even marinade absorption, improves product texture, and enhances the overall quality of the finished product. The 800-liter drum capacity makes it suitable for medium and large-scale production facilities. Adjustable drum speed allows the process to be adapted to different raw materials and production requirements. Manufactured from stainless steel, the machine is designed for reliable operation in meat and food processing environments. Technical Specifications Manufacturer: Ekomex Model: MV 800 Machine Type: Vacuum Tumbler Drum Capacity: 800 L Recommended Load Capacity: Up to 50% of volume Drum Speed: 1–8 RPM Dimensions: 2200 × 1500 × 1600 mm Weight: 700 kg

; Gross weight [kg]: 7200; Engine: Cummins QSK19-G11; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1065

Ref.nr: 00911 Name of the system Vertical Inside Broaching Machine The electromechanically driven broaching machine is suitable for the precise and economical production of internal profiles, keyways and gears. Thanks to their robust construction, very smooth running and automated process sequences, it is ideally suited for use in series production. Manufacturer: Frömag Model Type FSR 6-800 MZB-PPC Year of construction 2008 Holder for three broaching needles Hub 800 mm aVersion: Vertical internal broaching machine Pulling force: 60 kN Connected load: 15 kW Control: FRÖMAG Commander PP-10 Broaching tools: 3 pieces Machine Dimensions (L x W x H): approx. 1,050 x 900 x 3,800 mm Condition Fully functional, currently dismantled, but if necessary this can also be demonstrated with the agreement of the seller Submission date Immediately

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Electronicon, Capacitor MKP 18 µF -Type: E12.D78-401 800 -Number: 2x capacitors present -Price: per piece -Dimensions: Ø 35 x 105 mm -Weight: 0.1 kg/pc.

Manufacturer: Jac Year of manufacture: 2023 Condition: , 1 year warranty( display unit) Cutting thickness: 4-30 mm Speed: 120-240 slices per minute Control: Touchscreen Knife: Teflon round knife for versatile bread types Knife drive: Planetary-geared knife Electrical: 230V / 1Ph / 0.75kW Dimensions (T x B x H): 380 x 340 x 160 mm

Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details.

This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details.

Key data: 670 mm, 830 mm, 600 mm

Control: HEIDENHAIN ITNC 530 Travel: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Workspace Turntable diameter 800 mm, 9 T-slots, Table load 1200 kg, Tool changer Tool holder: HSK-A 63 96-fold tool changer Tool length max.: 300 mm Tool diameter max.: 75 mm Tool diameter with adjacent empty station max.: 125 mm Tool weight max.: 7 kg Tool change time: 3 s Rapid traverse and feed Express feed X Y Z 60 m/min, + max. speed A-axis 50 rpm C-axis 100 rpm Acceleration X Y Z max. 7 ms², General data Repeatability/positioning accuracy for new delivery 0.004 mm/0.008 mm (VDI/DGQ 3441) incl. tool holders with tools on the tool changer, Oil mist extraction IKZ Conveyor Nominal power 90 kVA Full load current 125 A max. current load 200 A 400 V 50 Hz

-6 rows of bread rolls -King Eco Twin -with König Classic Rex head machine -Year of construction 2010

A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side Too ...

This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details.

Transnorm conveyor belt GF 13900-900-800 RA2211 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): please contact Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 scop ...

Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies  ...

Aluminium angular conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling horizontal area: 2,500mm Rising Area: 800mm Angle of inclination in bend: 40° Conveyor belt total length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Propulsion: Motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive etc. ready for connection, motor 2 pcs. scalloped edges 80x45mm 2-ply particularly transversely stable Usable width 370mm

Key data: 800 mm, 670 mm, 500 mm

High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.

Workbench, work table, assembly bench, assembly table, worktable, wooden workbench table, aluminum workbench table -Workbench: Workbench table with drawers / solid construction, height adjustable -Width: 2000 mm -Depth: 800 mm -Height: 760 mm, adjustable, see photos -Weight: 74 kg

filling amount: 180 l injection pressure: 1,3 bar : 700 l/min diameter: 800 mm voltage: 400 V frequency: 50 Hz dimensions: ca. 1200x1300x1100 mm weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg