sa 800 used for sale

Best price 4600 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

COMPLETE HIGHSPEED SAWMILL LINE (capacity 80 000 fm): HIGH PERFORMANCE SASH GANG SAW ESTERER EWD HDN 600 WITH BV..

With stitching head UNION SPEZIAL Maximum sack length: 120 cm Available: now

Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Tube length: 48 - 140 cm Tube width: 30 - 70 cm Bottom width 7 - 16 cm 1 valve Bottom patch unit 1 or 2 colour on bottom patch Shingle pressing Option: S-Pressing, Icoma Still in operation: Yes Available: now

; operational

Machine completely reconditioned; Tube length: 56-164 cm Tube width: 35 - 70 cm Bottom width: 7,7 - 22 cm 1 or 2 valve units Shingle pressing belt Option: S-Pressing belt, Icoma Available: now

N E U M A S C H I N E! OUR MOST SOLD! Bandsaw HBS 470 400V 3 HP S 1 Cutting height of 290 mm 465 Mm cutting width 475mm solid wheels Precision roller guides 3454mm band length Work plate, swiveling Weight: ca. 180 kg G & HM-HBS470 SPECIAL PRICE NET OF 999.-

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052

Separating hunters dry Rapitsäge ideal for fast separations. Area depth up to 450 mm height up to 130 mm. Optimally adaptable through integrated hydraulic adjustment. Sawn is using large foot pedal (hands are free), cuts like a compound miter saw. Dimensions: Brteite 1000 amount 1400 1400 depth weight approx. 410kg. 7, 5kW motor 3000 rpm Fully functional! Well received, signs of wear present. 1 saw blade to the machine (on 2 PCs.) ask here in resale 0170 / 2204056 or fa.raupp@t-online

Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...

WEIBERT WJ-K315R Circular sawing machines Formatschiebetisch: 2700mm Engine power: 4 KW (5.5 HP), 400V, n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° Before scoring unit: With motor WJ-S315R-4KW 2.7 SPECIAL PRICE

HBS 433 Band saw Motor: 1.5 KW / 400 V Cutting height: 270 mm Cutting width: 410 mm Roll diameter 430 mm Precision roller Guide Band length: 3345 mm Table inclination 10 °-+ 45 ° Weight: 130kg G & pieces 5154303

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...

Refurbished: 2018 PLC: Siemens S7 Saw blade 550 mm Engine power 11 KW Saw blade feed 0-3000 mm / min Cutting speed (SB 500 mm): 4500 m / min (SB 550 mm): 5100 m / min Square maximum work area: 170 x 170 mm Flat maximum work area: 380 x 75 mm Round maximum work area: 165 mm Supply length 10-1000 mm Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) about: 2800mm x 1600mm x 2200mm (Magazine) about: 3300 x 2200mm x 1800mm Footprint Lxw 6100 mm x 2200 mm The machine was overhauled 2014 in our House. Among others were renewed following points: -New PLC control -New Elgo positioning system -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Overhaul Menzel minimal lubrication system -Replacing common wear parts -Overhaul of t ...

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Semi-automatic/hydraulic Hacksaw Manufacturer: machine tool factory Silistra Type: OH 163.01 Serial No.: 970 Year of construction: 1972 Technical data: E supply: 380 V, plug 16 A

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

N E U M A S C H I N E! Bandsaw HBS 473 400V 3 HP S 1 Cutting height of 290 mm 465 mm cutting width 475mm solid wheels 3 rolls of precision roller bearings 3454mm band length Work plate, swiveling Weight: ca. 180 kg SPECIAL PRICE NET OF 950.-

Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Drum pump, hygienic ExzenterschneckenpumpeVon of the company GrünpumpenTechnische DatenTyp ds.: LDS 80.1Ser. No.: 0259 Qm³ / h 2,40N1 / min: möglichVerpackung 6,75ZahlungsmodalitätenBarzahlung pick up and transfer in advance and shipping pick up, shipping via forwarding and abroad by prior arrangement all data were listed to the best of our knowledge and belief.Errors are reserved. This auction is aimed only at professionals, dealers, and other legal persons.

Data backup unit (flameproof) Manufacturer: Rosengrens Type: Safe, data backup rack Grade: S60D Empty weight: 925 kg Year of construction: 1982 In very good condition!

Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...

Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Basic refurbished 2018 Saw blade 350-400 mm Engine power 6.5 / 8.5 KW Speed 1500/3000 min-1 Saw height control: electronic Working range Max square: 120 x 120 mm Flat maximum work area: 200 x 100 mm Flat maximum work area: 250 x 70 mm (width only) Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-600 mm (~ 9999 mm Mehrfachhib) Nachschubgeschw. Max. 500 mm / s Weight approx. 1300 kg Dimensions Lxwxh 1800mm x1300mm x1950mm The machine is completely overhauled in our House and is then in a like-new condition. Among other things, following points are renewed: -Modification on PLC control -Conversion on Siemens HMI user interface -Conversion to ball screw with servo control -New electric components -New pneumatic lines -New pneumatic components -Conversion on Valve terminal -Optimization of the Absaugungleistung -New Menzel mi ...

Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A  ...

CIRCULAR SAW Mod ALTENDORF F45 second hand machine CE mark . with Use and Maintenance Booklet and Declaration of Conformity digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3000 max. blade mm.400 blade group inclinable at 45° saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1000 Volt. 380/50

Safety railing clamp for screwing Safety on every structure These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success. Doka handrail posts provide comprehensive safety • against fall hazards • on the structure and the formwork • thanks to their high quality (hot-dip galvanised) • conform to EN 13374 Class A Convenient and easy to mount Multi-functional as they can be used in many different situations ? maximum safety with easy assembly ? no squared timber waste

Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be  ...

CIRCULAR SAW MARTIN T73 AUTOMATIC 3 CNC controlled axes CE regulation: YES volt. 380/50 n.3 AXES CONTROLLED by CNC 1. blade height 2. blades inclination 3. parallel guide Equipment: parallelogram cross carriage T 7335 adjustment gauge T 7339 n.02 digital lingitudinal stops T 7341 3-axis scoring unit electrically adjustable T 7323 squaring device "Besaumfix" T 7372 second support T 7368 Technical data : length of carriage mm. 3700 cutting width mm. 1350 with 3-axis electric engraver Cutting height max 170 Blades inclination: 0 ° - 46 ° main engine power Hp 7.5 (Kw 5.5) Blade max diameter 500 mm 3-speed motor. rpm. 2800/4000/5500 Weight 2000 kg

Weibert S2 Circular sawing machines Formatschiebetisch: 1150mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° WJ 700100 Options: WJ-700101 format table 1270 mm WJ-700102 format table 1500 mm WJ-800105 before scoring unit with motor 0, 75kW WJ-400104 suction pipe with hose

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Table dimensions: 940x560mm Be hem length: 3200 mm Dimensions Formatschiebeschlitten: 360x146x3200mm Max cutting height 90 ° / 45 ° with preliminary Ritz: 138 / 98 mm Max width of the lengths left by the saw blade: 3260 mm RIP fence cutting width: 1270 mm Blade angle: 90 °-45 ° maximum blade diameter with ago Ritz: 400 mm Before Ritz saw blade diameter: Ø 120 mm Rotation speed of main saw blade: 3500/5000 min-1 speed scoring sawblade: 9200 min-1 engine power 400 V / 50 Hz / S6 - 40%: 7 kW (9,5 HP) Engine power before Ritz: 0.55 (0.75 kW) Dust extraction outlet diameter: 120 mm AbsaugstutzenØ blade guard: 60 mm M-design: with electric height adjustment and tilting the saw unit G & pieces 5504756

Graule ZS 135N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3800 RPM Cutting length 440 mm (at 90 °) Cutting height 135 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 350 mm Dust nozzle 100 mm Weight 100 kg

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

Graule ZS 170N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3500 RPM Cutting length 430 mm (at 90 °) Cutting height 170 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 420 mm Dust nozzle 100 mm Weight 120 kg