sa 800 used for sale

SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...

Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left

I sell a wide belt grinding machine SCM Sandya 16 S 110, built in 2012. Configuration: 18.5 KW hard-rubber grinding cylinder 15 KW hard-rubber grinding cylinder 11 KW combi unit soft-rubber cylinder + pneumatic shoe. Working width 1100mm. Pressure rollers for short elements. Compressed air Clean for all units. Weight 2750kg 3 motors 18,5 + 15 + 11kW Incl. full documentation. Condition AS NEW ! The machine did very little work. Available the same.

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Manufacturer: Stork-Packo, conveyor belt with high load capacity -Type: SAL-HE 10 -Metal belts: belt width 2 x 150 mm -Conveying length: approx. 2200 mm -Drive: without drive motor -Dimensions: 2350/460 / H210 mm -Weight: 127 kg

Terminal block, terminal block, feed-through terminal block -Type: SAKG 40 -Price: per package -3 packs of 10 pieces each -Weight: 2.3 kg/package

Terminal, series terminal, through terminal -Type: SAKG 46 -1x package: 9 pieces -Weight: 3.4 kg

SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts

Connector, plug, sensor module -4-pin -Screw locking: M12 x 1 -Nominal voltage: 250 VAC/DC -Cable entry: max. 6 mm -Connection: max.0.75 mm² -Number: 60x available -Price: per piece -Minimum order: 4 pieces -Weight: 20 g

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -3 pole -Distributor: 4-way -Weight: 0.1 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 8-way -M12: x 1 screw connections -Weight: 90 g

Rail support -Type: SAT38/3 Price: per package -3 packages: 5 pieces each -Weight: 1 kg per package

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Copper pipe -Sanco copper pipe: EN 1057 -18x: 1 -Roll: 25 m -Number: 2 rolls available -Price: per roll -Dimensions: Ø 760/60 mm -Weight: 10.7 kg

Stick electrodes 4.0 x 350 -Type: SL 19 G -Weight per package: 4.9 kg

Sensor-actuator distributor, distributor strip -Type: SAI-8-MMS 4P M12 -8-way: distributor -Weight: 800 g

Rietschle side channel blowers 1.5 kW 170 / 200 (max.) m³/h

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Machine Details Stock-No. 1105-03789 Type of machine Machining Center - Vertical Make CINCINNATI Type sabre 1250 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin UK Delivery time immediatly Freight basis FOT Technical details X-Travel 1270 mm Y-Travel 762 mm Z-Travel 820 mm spindle 11 kW spindle turning speed range 60-8,000 rpm toolpiece magazine: chain magazine 21 pieces tool taper DIN 69871 ISO 40 table-size 1,370 x 760 mm control fanuc om total power requirement 30 kVA weight of the machine approx. 9 t Additional information FANUC OM Technical details and information subject to amendments and errors.

Wir bieten Ihnen einen gebrauchten Metalldetektor an. Bitte kontaktieren Sie mich, wenn Sie interessiert sind.

Spine round machine Top condition, cleaned and tested

Pressure reducers, pressure regulators, liquid nitrogen containers -for: e.g. liquid nitrogen -Contents: 10 liters -Operating pressure: 3 bar -Dimensions: Ø 305/560 mm -Weight: 9 kg

Pressure reducers, pressure regulators, liquid nitrogen containers -for example, liquid nitrogen -Contents: 3.5 liters -Operating pressure: 3 bar -Price: per piece -Quantity: 2 pieces -Dimensions: Ø 193/360 mm -Weight: 4 kg

Strapping machine, packaging machine -Semi-automatic: Pallet strapping -on: built-in transport frame -Voltage: 230 V -Dimensions: 650/800/H1250 mm -Weight: 102 kg

Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators, hydraulic accumulators -Pressure accumulator: with shut-off valve -Type: SA1 OM25 T100 -Dimensions: 740/113/H200 mm -Weight: 15 kg

TECHNICAL DATA: Vertical milling machine Tool shank diameter mm: 35 Dimensions of the work table mm: 2400 extendable in width 4 speeds, self-braking Installed capacity KW: 5,5

PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2

Respiratory protection filters -Art. No.: 500 01 67 A2B2-P3 -Price: per piece -Quantity: 8 pieces -Weight: 0.5 kg/piece

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

Stick electrodes 2.5 x 350 -Type: CONARC 49 C -Price: per package -Number: 3 packages -Weight per package: 2.6 kg

PLC, PC, control, position controller, Hitachi Seiki, HC400 -The PC comes: from a Hitachi Seiki HC400 machining center -Manufacturer: Sanyo Denki -PC type: APC-9-203-1 -Dimensions: 300/150/H160 mm -Weight: 3.6 kg

Wire Electrode, Stainless Steel Welding Wire, Welding Wire -Big roll - Wire Thickness: 1.2mm -Wire electrode: highly alloyed, chemically resistant -Number: 4x rolls available -Price: per package -Weight: 12kg

Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional Delivery: ex site, including truck loading Operating instructions are available

Key data: 60

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Safinio, motor: 20 hp, variable speed drive, brand: Omron, model: F7, alternating current: 30 kw and electrical panel.

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

Label printer, barcode printer, printer, logistic labeling system -Labeler Anvos Model PB 101 FlagTag Type: HA101FTS -Barcode printer manufacturer SATO type: CL408e-2A -Max. Print width: 110 mm -Dimensions: 880/560/H1365 mm -Weight: 104kg

chamber volume: 170 liter useable volume: -- liter friction: -- motor drive power: 800 kW Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm The data for this ad was created with ModulMWS - the software solution  ...

Rademaker / Rondo ‘salmon en croute’ line Rademaker block processor with Rondo make up line. Has been producing ‘Salmon en croute’ for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours.

Machine Details Stock number 1105-03824 Machine type machining center - vertical Make CINCINNATI Type SABRE 500 Year of construction 1995 Control type CNC Storage location HAGUEANU FRANCE Country of origin Great Britain Delivery time immediately Freight base AB HAGUENAU FRANCE Technical details x-travel 500 mm y-travel 510 mm z-travel 510 mm Table size 950 x 520 mm Spindle holder ISO 40 Spindle speeds 60 - 6000 rpm Spindle drive motor 5.5 kW Rapid traverse 24 m/min Tool changing device 21-fold CNC control HEIDENHAIN TNC 415 Operating voltage 380 V table load 750 kg Projection 550 mm Total power requirement 30 kVA Machine weight ca. 4 t Information - Control: HEIDENHAIN 415 - Coolant device - Machine light

Machine Details Stock number 1105-03832 Machine type machining center - vertical Make CINCINNATI Type SABRE 500 Year of construction 1995 Control type CNC Storage location FRANCE Country of origin Great Britain Delivery time immediately Freight base EX LOCATION HAGUENAU Technical details x-travel 500 mm y-travel 510 mm z-travel 510 mm Table size 950 x 520 mm Spindle holder ISO 40 Spindle speeds 60 - 6000 rpm Rapid traverse 24 m/min Spindle drive motor 5.5 kW Tool changing device 21-fold CNC control FANUC OM Operating voltage 380 V table load 750 kg Projection 550 mm Total power requirement 30 kVA Machine weight ca. 4 t Information - Control: HEIDENHAIN 415 - Coolant device - Machine light

Gear motor, electric motor, three-phase motor, angular gear motor -Speed: 8.8 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 330/170/H140 mm -Weight per piece: 13 kg

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Full complete line SACMI for plastic caps.

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter -Handover in the current condition as seen -Condition: see pictures (not complete) -Diameter: 325mm -Inserts: Carbide -Intake: SK50 -Dimensions: 325/325/H210 -Weight: 28.8kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Manufacturer: Sandvik Coromant R391.B03R-40F53 A -Socket: Ø 40 mm -Boring tool holder: 16 x 8 mm -Tool: Ø 435 mm -Weight: 6.1 kg

Slack adjuster manual, slack adjuster, brake slack adjuster, brake adjuster -Number: 5 pieces available -Price: per piece -Dimensions: 310/160/H50 mm -Weight: 3.6 kg/piece

Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

geared motor, electric motor -Speed: 32.5 rpm -Power: 0.55 kW -Design: B5 angle -Hollow shaft diameter: Ø 25 mm -Protection class: IP 44 -Quantity: 1x motor available -Dimensions: 470/155/H240 mm -Weight: 19.1 kg

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed