sa 800 used for sale

Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact

TECHNICAL DATA: Trimming Saw Ø max mm: 400 Tenoning spindle: 1 Ø max mm: 350 Profiling spindles: 2 Ø max mm: 240 Glass frame trimsaw Feedrate max/min: 2.5/15

Qty. 1 Second-hand batch-type annealing furnace Mfc.: LOI SAAR Type: natural gas (Hu=3.6 MJ/Nm³) Charging material: square, round dia. 50 up to 200 mm Length: 6.2 m Max. heat treatment temperature: 950 °C Capacity: max. 60 T at normalising 35 T Application: Tempering, stress relieve, normalising Heat gradients: 60 °C/h average (adjustable) Heating zones: 4 Number of burners: 20 Control principle: on/off with digital programmer Temperature precision: 10°C tolerance at 550 °C

Complete with automatic sheet storage tower

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.

AFT Sandwich cutter Serial: 135012 Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph

Jelly Sprayer

Gnocchi factory 1. Cooking kettle Glass pro3, 500 l, tilting, mixing 2. Bin hoist for 200 bins feeding the former 3. Former Sandore NF 100c 8.5 kw 4. Feeding conveyor for vibrating Tunel 5. Vibration tunnel Sarp str 410 4.7 kw 6. Waste and water separator Sarp Filtro 7. Feeding conveyor for multi head weightier, z type 8. Platform for weigher 5000x5000 mm 9. 10 head weigher BVBA 01AAH-WS 10. Packer Tiromat BL-150 ET422N 11. Ready product conveyor

Sakurai Maestro 72 A Year of construction 2006

Hydraulic pump set Sauer-Sundstrand Model Code MPV 035D AABDDLA Type BAGRSGAA FFDNNN Model No. 4352025 A98-44-29352 with flanged gear pump made in UK

Used Sabroe PAC 202 LM-A water cooled chiller on R717 (Ammonia). Complete with 1 Sabroe SAB 202 LM screw compressor, Schorch KN7315L-AX01B-Z electric motor - 50/60 Hz - 315/360 kW - 2965/3565 RPM, Sabroe OHU 4131 oil separator with a volume of 610 liter, Sabroe GHEA 083002-C separator with a volume of 1650 liter, Alfa Laval MK15-BWFGR plate heat exchanger, Alfa Laval MK15-BWFDR plate heat exchanger and a control cabinet with a Siemens TP700 Comfort controller. The chiller has a capacity of 1668 kW at a water inlet of 12°C and outlet 6°C. Specifications: Brand: Sabroe Type: PAC 202 LM-A Product type: Water cooled chiller Capacity kW: 1668,0 Capacity tons: 474,3 Refrigerant: R717 Weight: 10,700 kg Sizes: 5700x2330x3100 mm (LxWxH) Compressors: Sabroe SAB 202 LM Display: Siemens TP700 Comfort

Manufacturer: Samsung Model: Excavator Built: 2004 Dimensions ( L x W x H ): 1700 x 1950 x 2400 mm

Cucinesse Evolve Kitchen Showroom exhibition piece unused Evolve Made in Italy The Evolve collection is present in the "Light On Design" catalogue, a curated project that celebrates the perfect combination of artisanal precision and industrial know-how. With its sophisticated design and meticulous attention to detail, the Evolve model creates a welcoming and tactile space where materials take centre stage. Manufacturer: Cucinesse Italy Model: Evolve Sand-beige Type: Cooking Island Countertop: Trespa marble effect Nero Street Worktop height: 94.5cm Length of the cooking island: 362.5cm Width of the cooking island: 103.5cm Height of the cooking island: 94.5cm Washbasin: Reginox base 50x40 cm Dishwasher: Beko BDIT38531DC 60 cm Refrigerator: Miele K7733E, 178cm, 320 liters Softclose Hob: Bora Puxu induction hob with extractor, 83x50 cm Faucet: Without Stove: Wit ...

Item no. Robatech: A125904

Geared motor from SEW . As good as new from bearing resolution SA57DT80N4/C Kw 0.75/0.75/S1 1380/42 Type M4A

Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Technical data: End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Electronic control of all machine functions - Alphanumeric  ...

CNC-Portal Cutting Machine Manufacturer: Sato Type: Satronik D5765 Built: 2016 CNC control: Satocontrol CNC 3010 Track width: 5,750 mm 6 x oxyfuel torche without a career without table without filter

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902

Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA52 DT71D-4BMG -Speed: 9.3 rpm -Power: 0.37 kW -Hollow shaft: Ø 40 x 120 mm -Protection class: IP54 -Brake: 5 Nm -Bearing block: THK HSP 30 -Dimensions: 520/260 / H285 mm -Weight: 36 kg

centrifugal pump LWH: 1000 x 380 x 570 mm Manufacturer: SABS (South Africa) Engine power: 15 kW with cover Speed: 1450 rpm

10 chisels to hydraulic dismantling hammer Sandvik Rammer size G100 and G120. 3 chisels are new 7 chisels are freshly forged.

For sale automatic press PTV 65 produced from SACMI Italy for ropp caps. Tools for 25mm and for 28mm ropp caps.

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

Gear motor, electric motor, electric gear motor -Speed: 1400 rpm -Power: 1.5 kW -Brake: 20.0 Nm -Shaft on both sides: Ø 14 x 20/19 x 40 mm -Protection class: IP54 -Dimensions: 430/200/H260 mm -Weight: 27 kg

Rolling bearings, ball bearings, SKF bearings, SKF, spherical bearings, roller bearings -Singer: Roller bearing -Outer diameter: 31 mm -Width: 35 mm -Price: per piece -Minimum order quantity: 5 pieces -Quantity: 153 pieces -Weight: 0.1 kg/piece

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

Code 2841 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 4475 Year 1976 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Condition Machine is in normal condition.

Code 2876 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 5150 Year 1980 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Steadies Rapid toolpost Condition Machine is in normal condition.

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 972 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

Stacking electrode 2.5 x 350 -Type: BASO G -Weight per package: 2.8 kg

Hydraulic balancing act with cooling and tank (0.70 cbm) Motor 37 kW, filter, pressure vessel, etc...

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Manufacturer: Stork-Packo, conveyor belt with high load capacity -Type: SAL-HE 10 -Metal belts: belt width 2 x 150 mm -Conveying length: approx. 2200 mm -Drive: without drive motor -Dimensions: 2350/460 / H210 mm -Weight: 127 kg

Salva oven and proofer Model: K-5+H-E Serial: 162.313 Stainless electric oven and proofer, adjustable temp and timer controls, up to 300'C with ability to steam, mobile, oven 3ph proofer 1ph

Terminal block, terminal block, feed-through terminal block -Type: SAKG 40 -Price: per package -3 packs of 10 pieces each -Weight: 2.3 kg/package

Terminal, series terminal, through terminal -Type: SAKG 46 -1x package: 9 pieces -Weight: 3.4 kg

connected load frequency: 230 V output: 1,2 KW taper diameter: 19mm mm turning speeds: 1000 - 3000 U/min roll surface width: max. 100 mm roll length: max. 120 mm weight: 2,8 kg range L-W-H: 430 x 280 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connector, plug, sensor module -4-pin -Screw locking: M12 x 1 -Nominal voltage: 250 VAC/DC -Cable entry: max. 6 mm -Connection: max.0.75 mm² -Number: 60x available -Price: per piece -Minimum order: 4 pieces -Weight: 20 g