sa 800 used for sale

Voltage: 230V, weight: 230kg.

Indestructible Samiac 40Kg in very good condition for sale Year of manufacture: 2000 Gas: Propane gas Power: 3 phases 380V Capacity per batch: 40kg Including: - Raw coffee lift - Destoner - 2 chaff collectors Revised and put into conformity by the manufacturer in 2008 (Emergency stop added) Since then: - All bearings changed - Drum back plate refit - Cooling arm stops when someone get close to the cooling bin - Insulation of the combustion chamber replaced - Raw coffee lift motor replaced Between 20 and 30 tons roasted per year during the last 3 years (less before). Carefully maintained and greased by it's owner. Nothing to do except for a cleaning, drum motor oil change and maybe a bit of painting. It was in production until the end of June 2022 and is now dismantled Don't hesitate to ask us for more details or request more photos & videos. Ty ...

Max. output: 1500 container/h, welding frame dimensions: 560x430mm, max. container height: 230mm, with Shrinking Tunnel SAROPACK T450.

Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation.

There are two identical machines available, rotational speed: 12.5/min, cylinder weight: 14.7t, length: 6890mm, with documentation, an inspection is possible.

Max. operating temperature: 150°C, compressed air supply: 6bar, power: 33kW, weight: 1.85t.

The system consists of a fixed-bed molecular sieve adsorber in combination with a rotary molecular sieve adsorber, volume flow: 45,000Nm³/h, exhaust air temperature: 20-60°C.

Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation.

Description Hydraulic Two-shaft Shredder Cutting chamer 1300 x 1036 Hydraulic unit Control panel

Description Two shaft shredder Motor power 22 kW Shredding chamber 758 x 850

Description manual command keyboard Sandretto S9 from spare parts warehouse no disassembly

Description Inlet size: 430 mm x 45 mm Cutting Chamber Width: 450 mm Processing thickness: 3;5;8;10 mm Engine power: 11 kW Rotating Blades: 16 Fixed blades: 2

Description Inlet size: 430 mm x 45 mm Cutting Chamber Width: 450 mm Processing thickness: 3;5;8;10 mm Engine power: 11 kW Rotating Blades: 16 Fixed blades: 2

Description EXTRUSION TAPE LINE - Screw Diameter 120 mm - L/D 25 - BD Plast Screen Changer - Motor Power 130 KW - Calender 1200 mm - Slow Stretching Line 1000 mm - Fast Extension Line 1000 mm - Corona Treatment - Rewinder

Tool holder type:Collet/ Spannzange ER 40 Tool holder shaft type:ISO 15488-40-A Shank diameter:60 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° rotary tool holder BMT 60 like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar Straight rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm RPM of rotary tools:6000 1/min ratio:1:1 Coolant trough compatible up to:80 (ext.) bar Straight rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

SANDRETTO MEGA T 4435/610 injection moulding machine (1998) 610 ton thermoplastic injection machine In working condition. Euromap 4435/610 Screw diameter: 21 Calculated injection volume: 2831cm3 Screw length (LD): 21 Maximum injection capacity: 746 cm3/1” Laminating capacity: 86 g/1” Pressure on material: 1548 bar Closing force: 610 tons. Variable displacement engine torque: 5570 Nm. Screw speed: 153 RPM Screw hydraulic motor power: 120 HP Injection group stroke: 725 mm. Heating zones: 4+nozzle. Total heating power: 38 kW. Mold locking force: 5985 kN Mold thickness min/max.: 300/1000 mm. Mobile plane stroke: 930 mm. Plate dimensions: 1270 x 1270 mm. Column passage: 850 x 850 mm. Column diameter: 160 mm. Extraction force: 103 kN Puller stroke: 350 Vacuum cycles: 10-11 n/1” Hydraulic circuit pressure: 160 bar Oil tank capacity: 850 l. Electric motor powe ...

Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

x-travel:1320 mm y-travel:500 mm weight of the machine ca.:6,4 t table diameter:1830x450 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m

material width:150 mm coil weight:1,5 t coil internal diameter:500 mm coil external diameter:940 mm strip material:20 x 1,0 - 50 x 4,0 / 200 x 2,0 mm wire diameter:1,0 - 5,0 mm power requirement:0,7 kW weight:0,7 t Dimensions (WxDxH):1,0 x 1,7 x 2,0 m palett decoiler:motoric driven

Equipped with gas bottles, gas cylinder trolley, pressure regulators, hose, cutting and welding jaw

REF-2301 SAFELINE PIPELINE METAL DETECTOR Metal detector manufactured by Safeline for the inspection of liquids. Pipeline diameter: 90mm. Overall dimensions: width 400mm, length 1,000mm, height 1,500mm.

Mobile sealing machine. Band width: 250 mm.

Santasolo Gearbox Part No.: 2KC110 The spare part is in good condition nevertheless, this is a used items, which has or may show signs of wear.

serial number: 06108STG30401; Capacity: 45.00 pcs/hr; Date printer: Yes; connection: 400 V; overall size L: 2100 mm; overall dimension W: 1150 mm; overall size H: 2150 mm; description: v.v. "Collamat" C6610 ettetter machine; "Kortho" coding printer; with 5x various hopper; including tube ø310mm; ø280mm; ø190mm;

unused; 400 watts.

Demo model

including work table

Demo model

Brand SASS Italy Model TRM 2200 Capacity 100 mm Spindle taper MT 6 Drilling depth 500 mm Spindle speed 18-1600 O-min. Horizontal movement 1845 mm Distance table spindle 2230 mm Colum diameter 550 mm T-slot base plate size 22 mm Floor dimensions 3500 x 1250 mm Power 11 Kw Weight 9000 Kg Dimensions L x W x H 3500 x1250 x 3700mm Extra Block table angle adjustable 760 x 1000 x 600 mm Blok table 1000 x 1000 x 600 mm

Without further data.

Hayssen Sandiacre Novus 350 - 2010. Serial No: MCHSP03427 400V / 3 Phase Power Supply Removed from factory in working order.

Fully automatic slicer / packaging line with marking system Cutting / Depositing / Packaging / Weighing / Marking KUCHLER S.A.M. PX3 Specifications: Type slicer: SAM PX3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Weighing & Labeling Unit: Mettler Toledo PAZ UC-GTT-M, 3/6 kg 400 volts / 50 Hz / 3.8 A Year of construction of cold cuts & packaging line: 2018 Year of construction of weighing & labelling unit: 2018 Film size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Performance up to 150 packages per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, teflon coated including original knife grinder including original knife lifter including original operating instructions Original price in this version approx. EUR 52.000, ...

Salvagnini P4 Year of manuf. 2007 Configuration: HPT201516 MZR Machine consists of: 1. Automatic plates feeder 2. Automatic bending unit 3. Automatic bend products receiver Max sheet thickness: mild steel 410 N/mm2: min. 0,5mm - max 2mm stainless steel 600 N/m2: min. 0,5mm - max 1,25mm aluminium 265 N/mm2: min. 0,5mm - max. 3mm Min and maximum dimensions of sheet material: L min./max.: 405 / 2000 mm W min./max.: 190 / 1524 mm max diameter 2150 mm centring dim. 2000mm Machine including bending tools

coolant capacity: 65 l/min Capacity: 0,12 Watt conveying height: 5 m total power requirement: 0,16 kW voltage: 400 (230) V 0: 1/2 mm Suction depth: 85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

300x160mm aperture. 250mm conveyor width. Left to right production. Supermarket spec. 900mm line height with adjustable feet. 2600mm machine length. Full electrical rebuild completed.

turning diameter: 0 mm turning length: 0 mm control: total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

360 x 140mm aperture. 300mm conveyor width. 900mm line height with adjustable wheels. 1600mm machine length. Stop on detect. Left to right production.

Safeline metal detector Stainless metal detector, belt dimensions 700mm x 300mm, aperture 350mm x 185mm, stop / start with alarm, mobile, 1Ph

: 1000 mm digital: . Year: 2007 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left

working area: 3800x5000 mm dimensions: 3000x1200x1100 mm weight: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.