s s used for sale

Servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor -Manufacturer: Siemens, compact asynchronous motor type 1PH7131-2NF02-0BC0 with fan -Speed: 1500 rpm / nmax: 8000 rpm -Voltage: 350 V -Shaft: Ø 42 x 110 mm -Protection class: IP55/54 -Fan: ebm 85 W -Dimensions: 650/340/H340 mm -Total weight: 131 kg

power converter, power supply, power pack, switching power supply, power supply, DIN rail power supply -Manufacturer: Siemens, SITOP PSU8200 Power supply DIN rail power supply -Type: 6EP3436-8SB00-OAYO -Input: 3 AC 400-500V/1.2-1.0.6A 50/60 Hz -Output: DC/24V/20A -Dimensions: 130/70/H125 mm -Weight: 1.1 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor -Manufacturer: Siemens, power contactor -Type: GB 14048.5/50 Hz / GB 14048.5/50 Hz / 3RT2023 -Number: 4x switches available -Price: per piece -Dimensions: 85/45/H150 mm -Weight: 0.6 kg/piece

Cutter head, milling holder, carbide cutter, indexable cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head SK50 -Type: Secodex 220.17-0063 -Recording: SK50 -Cutter head: Ø 63 mm / 3 carbide inserts -Total dimensions: Ø 97 x 230 mm -Weight: 3.6 kg

Hinge, door hinge, folding hinge, steel hinge, side wall hinge -Manufacturer: Stadler, hinge stainless steel with extendable pin -Type: 2-part 100/50 mm height 30 mm see photos -Article No.: 10002174 -Number: 14x hinge available -Price: per piece, minimum order 2 pieces. -Total dimensions: 100/50/H30 mm -Weight: 0.2 kg/piece

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Becker, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: Dietz 3.0 kW 2870 rpm -Speed: 2850 rpm -Flow rate: 250 m³/h -Compression pressure: 240 mbar -Dimensions: Ø 480 x 560 mm -Weight: 67 kg/piece

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor with reversing valve -Type: Elmo-G 2BH6 000-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Reversing valve: Wachenhausen GHDM7 -Dimensions total: 430/370/H380 mm -Weight: 38 kg

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, power converter, power supply, switching power supply, DC UPS module 15 -Manufacturer: Siemens, Sitop Power 40 -Type: 6EP1437-2BA10 6EP1 437-2BA10 -Input: 400-500 V 50/60 Hz -Output: 24 V DC 40 A -Quantity: 1x power supply available -Dimensions: 280/100/H180 mm -Weight: 3.7 kg

Tires, solid rubber tires, forklift tires, complete wheels -Handover: in its current condition as inspected -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic, 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm -Recess: Ø 120 mm -Price/Sale: complete -Dimensions each: Ø 570 x 160 mm -Weight: 96 kg

scoring circular saw blade, scoring circular saw blades, HW scoring saw -Manufacturer: Schäffer, Vorritz circular saw blades HW-Vorritzer 2-part, adjustable -Type: 120 x 2.8-3.6 x22Z=2x12 -Number: 9x scoring saws available -Price: per piece -Dimensions box: 225/220/H10 mm -Weight: 0.3 kg/piece

Pallet trucks, special pallet trucks for high pallets, pallet trucks, pallet jacks -Load capacity: 2000 kg -Dimension when retracted: 195 mm -Extended length: 320 mm -Fork length: 1010 mm -Fork width (outer): 665 mm -Inner fork width: 345 mm -Weight: 105 kg

Spindle lifting gear, linear drive, linear gearbox, lifting gear, spindle lifting element, spindle drive, electric actuator, valve drive, actuator, actuator motor, strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, spindle lifting gear for stretch wrapping system -Manufacturer: SITI, spindle lifting gear from ILAPAK Astra-STD packaging machine -Transmission: Type MI 30 H9 -Shaft: Ø 20 x 270 mm -Motor: ICME 0.09 kW -Dimensions: 395/265/H120 mm -Weight: 7 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8315-C -Recording: SK50 -Dimensions: Ø 330 x 260 mm -Weight: 36 kg

Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: WMW SWZ, Clip-on tool holder -Recording: MK6 -Length: 345 mm -Dimensions: see photos -Dimensions: 620/100/63 mm -Weight: 10.1 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head corner milling cutter 2 pieces -Type: 490-125Q40-14M 725386 -Adapter: SK50x40x40 -Delivery/Price: complete -Dimensions: Ø 125 x245 mm -Weight: 6.8 kg/piece

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 4 pieces -Type: Ø 100/110/140/160 mm various versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 31.7 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 40 kg

Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine, test screening machine -Manufacturer: Siebtechnik, test sieving machine LAVIB -Type: LAVIB 86 -Dimensions: 490/470/H600 mm -Weight: 66 kg

Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Perske, multi-spindle drilling head with drive -Drilling head: 18 spindles -Drill spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Number: 2x multi-spindle drilling head with drive available -Price: per piece -Dimensions total: 800/200/H575 mm -Weight: 67 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Single Motor Module from vertical lathe Scherer VDZ 80 DS -Type: 6SL3120-1TE24-5AA1 -Input: DC 600 V -Output: 3 AC 400 V 45 A -Dimensions: 500/150/H270 mm -Weight: 9.5 kg

quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert, interchangeable inserts -Quick-change sleeves: 12 interchangeable inserts -Design/Size: Ø 12/14/18 mm, see photos -Art.No.: 22069-12.0 / 22075-14.0 / 22090-18.0 -Price/Delivery: complete -Total transport dimensions: 300/245/H70 mm -Weight: 3.9 kg

beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SGK -Grip width: 1-75 mm -Load capacity: 2500 kg -Dimensions: 300/150/H390 mm -Weight: 17 kg

spindle head for lathe, lathe spindle head, lathe spindle head -Manufacturer: Scherer, spindle head from vertical lathe VDZ 80 -Clamping head: Hainbuch SK80BZIG SP.0219.0034.00 -Clamping device: SMW Autoblok Cil.85 SIN-S no-cc -Individual components: see photos -Price/Delivery: complete -Dimensions: 1350/560/H495 mm -Weight: 330 kg

Stainless steel couplings, pipe coupling, pipe sleeve, pipe connection -Manufacturer: Straub, pipe coupling type GRIP-L 57.0 -Inside: Ø 57 mm / 2.2 inch -Clamping range: 56.4 - 57.6 mm -Pressure: 16 bar -Number: 2x clutch available -Price: per piece -Dimensions: 96/78/H77 mm -Weight: 0.5 kg/piece

Stainless steel couplings, pipe coupling, pipe sleeve, pipe connection -Manufacturer: Straub, pipe coupling type GRIP-L 57.0 -Art.No.: 11043 -Inside: Ø 57 mm / 2.2 inch -Clamping range: 56.4 - 57.6 mm -Pressure: 16 bar -Number: 1x clutch available -Dimensions: 90/85/H80 mm -Weight: 0.8 kg

gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg

tires, solid rubber tires, forklift tires -Handover: in current condition as viewed -Tire condition: see photos -Manufacturer: Continental, solid rubber tires Super Elastic 2 pieces with rim -Tire size: 23 x 9-10 -Rim: 6.5F-10 -Bolt circle: Ø 160 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 535 x 330 mm/piece -Weight: 60 kg/piece

tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires Super Elastic 2 pieces with rim -Tire size: 5.00-8 -Rim: 3.00D-8 -Bolt circle: Ø 135 x 16 mm -Recess: Ø 100 mm -Price/Delivery: complete -Dimensions: Ø 430 x 125 mm/piece -Weight: 19 kg/piece

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, anchor nails -Manufacturer: Collated Fasteners, Strip Nails Anchor Nails 6 boxes/ total approx. 12000 pieces -Type: SNK2575 4.0 x 50 mm ring galvanized -Price/Delivery: complete -Transport dimensions: 650/380/H200 mm -Total weight: 59.7 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed -Hand lever: missing -Lever shears: Sheet metal shears cutting length 200 mm -Holder: continuously adjustable -Number: 2x lever scissors available -Price: per piece -Dimensions: 580/120/H480 mm -Weight: 49 kg/piece

Hand lever shears, long blade sheet and round steel shears, lever shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed -Hand lever: missing -Manufacturer: VEB Pels, lever shears, profile steel shears type HS 7 -Cutting insert length: 250 mm -Angle profile: see photos -Dimensions: 580/170/H600 mm -Weight: 76 kg

Coupling, power coupling, gear coupling, transmission coupling, flange hub for crane undercarriage, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shaft coupling -Shaft coupling: Schan PBK Ø 200 mm -Bolt circle: Ø 170 mm -Dimensions: see photos -Quantity: 1 piece available -Dimensions: Ø 200 x 60 mm -Weight: 4.0 kg

Coupling, power coupling, gear coupling, transmission coupling, flange hub for crane undercarriage, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shaft coupling, clamping set -Manufacturer: Stüwe, clamping set type WK 60-12x60 -Number: 6x clamping set available -Dimensions: Ø 120 x 80 mm -Weight: 4.4 kg/piece

Screw jack, linear drive, linear gear, jack, screw jack element, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Pfaff silver blue, screw jack -Type: SHE 2.5 -Useful stroke: 200 mm -Shaft: Ø 16 x 40 mm on both sides -Spindle head: bore Ø 25 mm -Dimensions: 465/190/H165 mm -Weight: 10.1 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 30 mm -Price: complete -Dimensions each: 145/145/H30 mm -Weight 1.7 kg/piece

Container, grit trap, storage container, transport storage container, storage tank, transport container, settling tank for groundwater lowering -Container: Transport storage container -Capacity: 4000 liters -Inner dimensions: 2990/990/H1000 mm -Connections: see photos -Dimensions total: 3570/1150/H1150 mm -Weight: 780 kg

Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holder -Mounting bracket: Type H7 125.1-150 -Recording: MK5 -Tool: 90° / Ø 130 mm -Dimensions: Ø 130 x 375 mm -Weight: 9 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holder -Recording: MK4 -Total length: 253 mm -Hole: Ø 22/14 mm / Pins: Ø 8 mm -Spacing of pins: 40 mm -Dimensions: 253/51/H31 mm -Weight: 1 kg

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with 70 mm diameter drill blade -Reamer: Type H4 65.1-80 -Recording: MK5 -Dimensions: Ø 70 x 485 mm -Weight: 4.2 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, Morse taper adapter -Morse taper sleeves: extensions / adapter sleeves MK6 -Type: SWN 136/29 MK6-MK6 / MK6-MK5 / MK6-MK4 -Dimensions/Quantity: see photos -Transport dimensions: 500/480/H95 mm -Weight: 50.7 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Baumüller, servo motor with brake -Type: DSCG 045 S65U40-5 UL -Power: 1.2 kW -Speed: 4000 rpm -Technical data: see photo type plate -Shaft: Ø 14 x 30 mm -Number: 2 motors available -Price: per piece -Dimensions: 255/93/H140 mm -Weight: 5.3 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 6 sets of top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions total: 285/240/H85 mm -Total weight: 24.4 kg

Turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, change holder, turning tool holder, clamp holder, turning tool holder -Tool holder: steel holder -Type: B IV hexagon 28 mm -Dimensions: see photos / technical drawing -Number: 2x holders available -Price: per piece -Dimensions: 210/42/H45 mm -Weight: 2.0 kg/pc.

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Elektror, side channel blower side channel compressor -Type: SD-4N/S892 -Drive: 1.2 kW -Speed: 2800 rpm -Flow rate: 2.8 m³/min / 168 m³/h -Compression pressure: 180 mbar -Dimensions total: 450/360/H370 mm -Weight: 24.7 kg

Tires, solid rubber tires, forklift tires, complete wheels -Handover: in the current condition as viewed -Condition: see photos -Manufacturer: Continental, solid rubber tires Super Elastic with rim 2 pieces -Tire size: 23x9-10 SC 10 RIM 6.50 F -Bolt circle: Ø 160 x 22 mm -Recess: Ø 110 mm -Price/Delivery: complete -Transport dimensions: Ø 480 x 400 mm -Total weight: 78 kg