s s used for sale

General SKU305U615 MakeSTC Engineering GmbH TypeReaktor 6500LTR LocationBarneveld CEcheck Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.6004 Year of construction2005 Floorspace2,3x2,3 m Total height3,7 m Weight2100 kg ATEX compatiblecheckStainless Steel ReactorsSTC E ...

Cup Ø: - mm depth: - mm NUMBER OF TURNS: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kövy KA sliced roll line with peeling belt Belt deposition - Kövy KA cut roll line - Sheet metal deposition with take-off belt - 4-row - 380 volts - max. hourly output 4800 pieces

A Kemper SPL50 spiral mixer for the production of high-quality doughs, suitable up to a maximum of 80 kg of dough, is currently for sale. The machine has two speed levels, slow and fast, as well as automatic operation which runs via 2 timers. The boiler, the spiral and the guide rod are made of stainless steel. The boiler can be switched to both counterclockwise and counterclockwise rotation. The machine is equipped with new wear parts, 2 new Schleicher timers and the machine has been completely repainted. - Manufacturer: Kemper - Type: SPL50 - Capacity for a maximum of 80 kg of dough or a maximum of 50 kg of flour - 2 speeds: Slow and fast - 2 timers for automatic switching on and off - Manual or automatic rotation selectable - Kneading time per speed adjustable up to 12 minutes. - Boiler with clockwise rotation and counterclockwise rotation - Flour dust cover with safety ...

Inv. Num. : 8867 Type: - Producer: Surfin Generated: Parameters: Inner width: 1250 mm Inner depth: 1250 mm Interior height: 2100 mm Equipment: 3x filter cartridge

used dough sheeter Rondo Doge SFS 611 for sale and immediately available in our warehouse in Bielefeld. Manufacturer : Seewer AG Burgdorf Dough Sheeter Rondo Doge SFS 611 -with new ribbons -with automatic reel -with automatic flour shaker -with digital control -Built in 1999 -Stainless steel -Mobile on castors with parking brake

used Spiral mixer Kemper SP 100 L with stainless steel boiler and stainless steel tool in good condition immediately available for sale. The machine is mobile on rollers with brake and with replica flour rod cover including safety switches. -Manufacturer: Emil Kemper GmbH - Type: SP100L -Stainless steel boiler -Stainless steel spiral -2 x Automatic timers -2 x speeds slow and fast -with flour dust cover -for 100 kg flour or 160 kg dough -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse

Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm -Dimensions: 5400 x 1110 x 1250 mm -Condition: In very good condition, fans tested, under nitrogen pressure

A 2-station party keg filler small keg filler Esau & Hüber is available. Filling capacity: 300/h, keg size: 5l, filling positions: 2. An on-site inspection is possible.

Offer 25521 Double-sided long goods – cantilever rack without contents Technical data: - 2-sided cantilever rack consisting of 10 uprights with plug-in system - Height-adjustable bearing arms - 130 bearing arms - Stand height approx. 6000 mm - Wide stands + support arms approx. 1600 mm - max. arm load approx. 400 kg - Max. drawbar load per support approx. 5000 kg - Center distance of the shelf parts connected to diagonals approx. 1.0 m - Grid spacing for the reg arm - Height adjustment 125 mm - Arm dimensions: L 700 x W 90 x H 70 mm - Stand dimensions W 220 x H 150 mm - Weight per post approx. 400 kg - Weight per arm approx. 10 kg

Item condition: in working order Availability: immediately Table and sink: included Original price 2023: €28,000.00

Mini Rustica Guillotine + Die Cutter Item condition: fully functional Availability: immediately

Product: Mung bean seedlings, Entry temperature product: 10 – 15° C, Initial product temperature: 80 – 85° C, Perfomance: 1,000kg/hour, Determination: Blancheur is for the process of thermal treatment of vegetables, and fruit definitely, Working principle:, The product is fed in by the operator. The operator ensures an even, Distribution on the band. Blanching is done by spraying with warm water, Connection of the required belt speed. To maintain and improve the, To ensure the quality of the water, the circulating water is permanently cleaned using a stainless steel filter sieve., Technical specifications:, Total length: approx. 5,000 mm, Height: approximately 2,500 mm, Width: approx. 1,500 mm, Band width: 800 mm, Performance: up to 1 000 kg / h, Drive: 1.5 kW, Steam consumption: approx. 150 - 250 kg/t product, Blancheur consists of the following components:, · modular transportin ...

Manufacturer: ASYS Model: INSIGNUM 2000D Scan Year of Manufacture: 2018 TECHNICAL SPECIFICATIONS Nominal Voltage: 230 / 115 VAC Working Voltage: 24 V DC Frequency: 50 / 60 Hz Full Load Current: 1.5 / 3.0 A Number of Phases: 1 Power: 0.32 kW (320 W) Circuit Breakers: 10 A Pressure: Not applicable Flow: Not applicable DIMENSIONS Length: 1.2 m Width: 0.6 m Height: 1.8 m WEIGHT 200 kg NETWORK CAPABILITY Yes CERTIFICATION CE Marked APPLICATION Industrial automation / scanning system Find more here - / Contact us at -

Non-returnable glass bottling line SIDEL capacity: 40.000 bph by 250 ml glass bottles year of manufacturing: 2003 bottle formats: 0,25 ltr., 0,33 ltr., 0,5 ltr. Filling product: Beer, CSD or other beverages The line was commissioned in 2003, has been well maintained. The line was in production until January 2026. The line is consisting of: Pallet transport for depalletizer Sidel / SIG Simonazzi / GEBO Bulk depalletizer Sidel / SIG Simonazzi / GEBO for bulk pallets 1.200 x 1.000 mm Pallet transport for palletizer Sidel / SIG Simonazzi Tray and/or Carton palletizer Sidel / SIG Simonazzi linear machine capacity: 350 - 660 layers/h Pallet shrinkwrapper Sidel / SIG Simonazzi / MSK capacity: 55 pallets/h Pallet labeller Sidel / SIG Simonazzi / Logopak capacity: 120 labels/h Carton erector Sidel /SIG Simonazzi capacit: 3.600 cartons/h Basket er ...

General SKU252X215 MakePharmatec LocationBarneveld CEcheck TypeRet P15680 Pressure Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel Heat exchangercheck Verticalcheck Heating surface±5m² Tube capacity67 l. U-typecheck Number of tubes:43 Tube diameter10 mm Tube length2000 mm Max. temperature200°C Shell capacity22 l. Shell diameter250 mm Shell length2100 mm Max. temperature200°C Shell connectionscheck Information No.12 1675 01 Year of construction2012 Floorspace0,75x0,75 m Total height2,2 m Weight240 kgShell and tube heat exchangersPharmatec GmbHHeat exchangers > Shell and tube heat exchangersBrand > Pharmatec GmbH What you c ...

A vertical panel saw Striebig is available. Cutting length: 4600mm, cutting width: 2070mm, cutting thickness: 60mm, vertical cutting position spacing: 1000mm, saw blade diameter: 250mm, motor power: 3kW, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 5750mm/1500mm/2850mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.

A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.

Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg

Type: TSO600/96/4 TH Serial number: 10064051 Year of constructon: 2007 Model: right hand execution Belt width: 600 mm Belt length: 96 m Tiers: 2 x 4 pc Heating: thermal oil, 400 kW at 180°C Steam: max 1500 kg/h Exhaust: Ø 252 mm, 1000 m³/h Compressed air: 6 - 8 Bar Cold water: 1 - 20°C, 3 m³/h Hot water: 20 - 60°C, 4 m³/h Power: 3 x 400V, 50Hz, 40kW Dimensions: 11040 x 4000 x 4975 mm Weight: 20000 kg With belt washer and CIP

Machine feature: A standard steam boiler, 10 to 13 bar Manufacturer Part Number: K19105/AV, Type: 128.9, Year of construction: 1990 Output: 13 bar, 10.8 tons of steam per hour Up to 300 °C Steam temperature With white main burner for light oil, Type: RGL70(2-A), Number: 5163093 Year of manufacture: 2002, Output up to 10,500 kW With a horizontal feed water tank, Manufacturer: Kyll, Bergisch Gladbach Content: 19,860 liters, Permissible temperature: 110°C With a water treatment system for boiler water with a separate control cabinet system

Key data: 600 mm, 400 mm, 350 mm

For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...

The used Kemper ST75A spiral mixer with 2 stainless steel boilers each is immediately available in our warehouse in Bielefeld. - Type: ST75A - a machine with 2 boilers - for max. 75 kg flour or for max. 120 kg dough - With 2 automatic timers - Shell diameter 76.5 cm - Boiler capacity: 175 litres - Boiler drive via friction wheel - Boiler can be manually locked - Extendable - With 2 timer relays automatically - 2 speed settings: fast and slow - Flour dust cover - Stainless steel spiral and tool - Boiler also made of stainless steel - Machine is anchored to the ground with 2 screws - Machine head moves up or down when the boiler is retracted and retracted - 400 volt power connection - Robust and stable machine - Machine completely repainted - All wear parts renewed More information and pictures, as well as shipping costs and trade-in on request. We are constantly ...

Storage areas for machines and systems as well as operating equipment, robots, transformers, packaged general cargo or pallets. 3400 m2 of storage space, 580 shelf spaces. Central location, two locations directly on the A5/A49. Loading/unloading operation. Forklifts up to 16 tons. Indoor cranes up to 32 tons. Planning and execution of dismantling and relocation.

Cutting height 160 mm Cutting width 380 mm Table size 400 x 460 mm Table inclination up to 45 Wheel diameter 220 mm Motor 1 HP - 750 watt Weight approx. 45 kg

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Automatic Pneumatic Workpiece Clamp  Cutting height 280 mm at 90 Cutting height 140 mm at 30 mm Engine power 11KW/15hp Separating cuts Mitre cuts  Schifter cuts, longitudinal sections  Throat rafters, eaves planks, Burrs, cutting wedge planks Roller conveyor strong version right  incl. roller table and longitudinal stop L=2500 mm side-movable Roller conveyor strong version left  incl. roller table and longitudinal stop L=2500 mm side-movable

The Spt model is equipped with an automatic loading system with lift table and slider  and collets  Furthermore, the machine has a pre-warehouse of plates Panel dimensions up to 4400 x 2200 mm

Table extensions  Table length 240 cm  Swivel range -10+45 Max. spindle protrusion 175 mm Motor 7.5 kw Weight 950 kg Compressed air 6 bar

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for the aggregates LED interior lighting Y version for RTC - Pneumatic on/off switch for the roller of the first unit ? R? - Pneumatic on/off switch for the roller of the second comb belt ? TC? - Split elastic and electronic sanding pad (56 graduation) - Electronic thickness adjuster SMART CONTROL S electronic control 10-inch color LCD touchscreen Motor power 15 kW

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for visual access to the units LED lighting for indoor lighting Vacuum table with 3 kW electric fan Tynex Texturing Brush with Tynex Brush K46 Y-type - Pneumatic on/off for the roller of the first unit ? R? - Pneumatic on/off for the roller 2nd abrasive belt roller combination unit TC - Elastic electronic sanding shoe (56 graduation) - Electronic thickness adjuster FOX 1000S electronic control 10.4 inch touch screen 15 kW motor power 1-motor version

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Vacuum filler bloc Stork/Zalkin 32/8 with 32 filling valves and 8head screw capper running direction: from right to left with frequency inverter with safety housing for 0,2 - 1,0 ltr. bottles

General SKU215X086 MakeVMI Agitator LocationBarneveld CEcheck TypeDALLE HYD T 110 DE Main Features MaterialStainless steel Motor1.5 KW Length1375 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1375 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft142 — 1420 — 2471 rpm MaterialStainless steel 1.4301 (304) Information No.167386 Year of construction2012 Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgStirrersVMI AgitatorMixers > StirrersBrand > VMI Agitator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Used W&P bread roll line, type: MULTIMATIC MUC-5 with Super B Compact - Head machine / dough divider Multimatic MUC-5 - 5 rows - Up to 95g dough weight per dough piece - Proofer Super B Compact - for emperor and sliced rolls - with side discharge - The system was in operation until the end Visits and test runs are possible by arrangement.

General SKU330W1526 LocationBarneveld MakeMirap TypeARW 0.55 Main Features MaterialStainless steel Volume40 Ltr. Motor0.75 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity40 l. Vessel sizesDia. 400x600 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN30 With propellor stirrercheck Motor0,75 kW, 400 volt, 1390 rpm, (Ex) Speed mixing shaft258 rpm MaterialStainless steel 1.4301 (304) Information No.4527 Year of construction1980 Mounted on legscheck and wheels With switchcheck Floorspace0,45x0,45 m Total height1,85 m Weight140 kgStirring vesselsMirapStirring vessels > Stirring vesselsBrand > Mirap What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...

General SKU335X751 LocationBarneveld CEcheck MakeMöstl Anlagenbau GmbH Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume94 Ltr. Motor0.18 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity94 l. Vessel sizesDia. 400x825 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck Outletcheck DN20 (with valve) With jacketcheck (18 l.) Max. temperature0/170°C With propellor stirrercheck Motorcheck (0,18 kW, 230/400V 2740 rpm) Speed mixing shaft279 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.1814 Year of construction2019 Mounted on legscheck Floorspace0,7x0,8 m Total height1,8 m Weight220 kg Extra Specifications Electrochemical polishing, surface roughness :Ra ≤ 0.4 µ ...

General SKU335X731 LocationBarneveld CEcheck MakeGEA Westfalia AG TypeCSC 20-06-476 Main Features MaterialStainless steel Capacity1000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Capacity500-1000 Ltr./h Motor11 kW 400/690 V 1460 rpm Max. rotor speed8320 rpm Self-dischargingcheck InletDN40 Liquid outletDN50 Solids outletDN125 Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L) Information No.1722-676 Year of construction2002 Mounted on mild steel framecheck Stainless steel frame With switchgearcheck Floorspace2,50 x 1,40 m Total height2,50 m Extra Specifications With stainless steel overflow vessel, volume 55 L: jacket volume 10+16 L. allowable temperature 20/+145°C, allowable temperature jacket, 2/+20°C, : Hot vessel, volume 30 L: allowable temperature +140°C, : Siemens touchscreen control, type Simatic mult ...

General SKU281W438 LocationBarneveld MakeLeistritz Sizes Screw diameter30 mm Main Features Motor16 KW Inlet diameter65 mm L/D30 Specified Features - Double screw extruder MaterialStainless steel Double screw extrudercheck Number of hours3457 Screw diameter34 L/D30 Counter rotatingcheck Ventedcheck With vacuum pumpcheck Number of heating zones:6 Electric heatingcheck DC-motor3 kW (380 V) Screw speed110 rpm Feeding with hoppercheck Exchangeable segmentscheck Information TypeLSM-30 34 GG Mach.No.330182401 Year of construction1990 With switchgearcheck Sizes switchgear700 x 500 x 450 mm Floorspace2,75 x 0,91 m Total height2 m Weight1000 kg Extra SpecificationsScrew Dia. 34 mm, center distance 30 mm, screw thread depth 4 mm, 6 heating zones, 7 cool zones, gear speed 2200 rpm / I=20 rpm, Resotec control, extrusion pack Double screw extrudersLeistritzExtruders  ...

A semi-automatic 1-head pneumatic jar closing machine Lenssen Vul-En Sluittechniek is available. Closing capacity: 720jars/h, operating pressure: 6bar, machine dimensions X/Y/Z: approx. 500mm/500mm/800mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.

SRE Maxi Function: Punching, creasing, cutting (longitudinal/crosswise), printing and folding in one operation Material: Single, double and triple corrugated cardboard Material thickness: from approx. 2 mm to 16 mm thickness Working width: 2,500 mm Working length: 10,000 mm Various additional tools available FPU Printers Roller circumference: 2,500 mm Printing: 1-color flexographic printing Lift table front Roller conveyors in the middle and rear

General SKULX014 LocationBarneveld CEcheck MakeStolz TypeTURBO SIFTER BCMT Ø1250 Main Features MaterialMild steel Motor45 KW Length1900 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesø 1250 x 1900 mm Screw sizesExtracting screws under each turbosifter: ø 550 x 3000 mm Inlet350 x 350 mm With inspection hatchcheck MotorBeater motor: 45 kW: Sieve rotation gear-motor: 1,5 kW SpeedBeater rotation speed: 240 rpm: Sieve rotation speed: 6.3 rpm With sieve cagecheck Sieve perforation3 mm MaterialMild steel Information No.24-1597 Year of construction2024 (?) Floor space3,2 x 1,6 m Total height2,2 m Weight3700 kg Extra SpecificationsSieve area: 4.5 m² Air purged glands: :Not listed — however, machine uses compressed-air blowing system for sieve cleaning (1,670 NL/min at 6 bar).Rotating sievesStolzSieves > Rotating sievesBrand > Stolz What yo ...

General SKU340X780 MakeK-Tron TypeK2m-T35 No.11240198/800890 Year of constructionunknown Main Features MaterialStainless steel Motor0.45 KW Inlet diameter220 mm Specified Features - Metering screw MaterialStainless steel 1.4571 (316Ti) Metering screws Metering screwcheck Screw diameter35 mm Pitch50 mm Shaft diameter15 mm Screw length250 mm InletDia. 220 mm OutletDia. 110 mm With DC motor0,45kW, 200V, 2000RPM Without controlcheck Screw speed120-600rpm With breaking/mixing shaftcheck Information LocationBarneveld Floorspace0,85x0,45 m Total height0,4 m Weight50 kg CEcheckMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The  ...

General SKU325X666 MakeFryma TypeMSM-32 No.M-14370/71 Year of construction1990 Mounted on framecheck Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume2.4 Ltr. Motor22 KW Specified Features - Sand mill Vertical sandmillcheck (Co-ball mill) Capacity2,4l Housing dimensions Dia. 350x210 mm InletDia. 30 mm OutletDia. 25 mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor22 kW, 380/660 volt Rotor speedApprox 580 rpm Capacity180 l/h MaterialNimonic 2.4951 Information LocationBarneveld With switchcheck Floorspace1,10x1,30 m Total height1,76 mSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...

General SKU268K299 MakeRomaco AG Fryma Koruma Rheinfelden TypeCoBall mill MS-50 No.75439/00 Year of construction2000 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume9.8 Ltr. Motor55 KW Specified Features - Sand mill Vertical sandmillAnnular gap bead mill (1x) Capacity9,8 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Max. temperature80 Degr. C. Motor55,0 KW, 400/690 Volt (Ex) Capacity150-1000 Ltr/Hr MaterialStainless steel Information With switchcheck Floorspace2,1x1,0 M Total height2,3 M ATEX compatiblecheckSand millsRomacoMills > Sand millsBrand > Romaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU407W1309 MakeTDA GmbH LocationBarneveld Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Volume38750 Ltr. Specified Features - Silo Capacity38,75 m3 Vessel sizesDia. 5500x8100 mm Conical bottomcheck ManholeDN600 Top connectionscheck OutletDN250 Max. temperature120°C Silos MaterialStainless steel 1.4571 (316Ti) Silocheck Closedcheck Capacity38,75 m3 Diameter2750 mm Cylindrical height5900 mm Conical height2200 mm ManholeDN600 Information No.4947 Year of construction2000 Floorspace3,60x3,60 m Total height9,00 m Weight5000 kgSilosTDA GmbHTanks > SilosBrand > TDA GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2023, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, capacity: 600 kg/h depending on material and mesh, availability: immediate, type: fully automatic