s s used for sale

Hand-operated 3-roll sheet metal round bending machine with asymmetrical roller order Specifications: - Working width max. 1020 mm - Material thickness max. 1.5 mm - Roller diameter 64 mm - Upper roller turned into a crown, can be swung forward - Rear shaft with handwheel diagonally adjustable for conical rounding - Lower roller adjustment with control lever and eccentric - Front shaft parallel - Space requirement approx. W 1250 x H 950 x D 750 mm - Weight approx. 200 kg

Offered are 2 screw compressors with the following features per unit: Power: 15kW, pressure: 10bar, volume flow: 1950l/min (1.95m3/min), speed: 2930rpm, including sound enclosure, 1) year of construction 1989, operating hours: approx. 38100h, 2) year of construction 1986, operating hours: approx. 10600h. Inspection possible by appointment.

Turning- in machine for casemaking Schmedt Präkant HHS6F double action turning-in for cases up to 60x60 cm manual foot operated, so the timing of turning-in is decided by the operator

Spine gluing machine with heated au-bain-marie bin for warm animal glue can also be used for cold glue roll width: 105 mm with static brush Single phase

Very good surface grinding machine Table surface / working area 200 x 600 mm

Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement.

Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible.

A Schechtl swing bending machine for sheet metal processing is available. Working length: 2040mm, opening height: 140mm, bending capacity: 3mm, bending speed: 50°/s, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 3000mm/750mm/1250mm, weight: approx. 2750kg. On-site inspection is possible.

Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move.  With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges.  🔧 100% original Doka XP parts  📦 Ready for immediate delivery †incl. reusable packaging  💶 Full package for just €5,399.†(net)  This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to.    Expand now †before you hit the limit.  The accessories are ready †you just have to grab them. 😉  👉 Ask. Decide. Go.  Price: from € 5399,00 ...

✨ Grab it now †your top scaffold deal! ✨ We’ve got a 100 m² facade scaffold with a system width of 1.09 m , ready to use right away. The package includes a walk-through frame, adjustable base jacks, and everything you need for your next project. 🏗️ This set is based on the proven Layher Blitz frame scaffold and combines durable materials, high stability, and easy handling . The steel or aluminum decks are particularly long-lasting, and the integrated walk-throughs with ladders make working comfortable and safe. Thanks to the standardized 2.57 m frame length , the scaffold can be easily expanded and is fully compatible with all original components. 💪 The plug-in system allows for quick assembly and disassembly, saving valuable time on the construction site. At the same time, the sturdy design ensures you can work safely ...

🏗️ Looking for height, load capacity and speed? This set delivers: 3 complete Hünnebeck ID 15 support towers , approx. 8.50 m high †including all components and H20 brackets for a safe and stable top working platform. 📐 Built for large-scale formwork: Perfect for beam shoring, slab formwork with high spans or temporary support in infrastructure projects. Compact, durable and fully compatible with standard formwork systems. 📦 Fully equipped: You get 3 complete towers †ready to assemble and use on site. Includes working platforms with H20 consoles †no need for extra add-ons. ✅ Modular and expandable: Additional used Hünnebeck ID 15 parts are in stock. Combine towers, add height or scale up as needed. ⏱️ Limited stock available: High scaffold towers like these are hard to find on the used marke ...

🔧 Stable, ready to use, and exactly what you need on site: 3 used Hünnebeck ID 15 towers , approx. 5.50 m high †including all components and H20 brackets for a safe working platform. 📐 Built for tough jobs: Ideal for beam support, slab formwork or as an add-on system on larger sites. Fits wherever support is needed. 📦 Quick and straightforward: Solid design, easy assembly †no fuss, no extras. just performance where it counts. ✅ Platform included: Equipped with H20 console †you’re safe at the top, no extra parts required. âž• Need more? We’ve got it: Additional used Hünnebeck ID 15 parts are available in stock †perfect for scaling up. ⏳ Limited availability: These ID 15 tower sets move fast †once theyre gone, theyre gone. 👉 Grab yours now and get the job do ...

💥 You need load capacity, height and safety †right now? This complete set gives you exactly that: 3 full Hünnebeck ID 15 steel frame towers , approx. 5.50 m high, including all components and H20 brackets for a safe top working platform. 🟨 Perfect for your next construction site: Whether youre doing slab formwork, beam support or heavy-duty shoring †these used shoring towers are strong, modular and always expandable. 🟨 Fast setup: Few basic parts, easy handling, no tool chaos. Two workers? Enough. 🟨 Platform included: H20 console included †so youre safe even at the top. No extra parts needed. 🟨 Smart for your stock: Once secured, always flexible. Combine, stack or expand these scaffold towers as needed. 🟨 Need more? Just ask: Larger quantities of used Hünnebeck ID 15 components are availa ...

Maximum load capacity, modular flexibility, and quick assembly †the Meva MEP shoring tower is available at Form-on as a smart complete package for your construction project. ✅ Ideal for bridge and high-rise construction ✅ Stable, time-saving & versatile ✅ Delivered as a ready-to-use set †fast and reliable 📦 Only on market day: Secure your MEP complete package †available immediately , only while supplies last! 📩 Request your quote today & get your project off to a smart start! Price valid: per total quantity Total price: 29,999.00 EUR Partial quantity: not possible Subject to prior sale Quality mix This package contains items of our various quality levels. Please take the exact qualities from the product listing above. 20.00 x MEP-frame 55 (Art-No. 29-909-10), 2 stars 20.00 x MEP-frame 110 (Art-No. 29-909-15),  ...

🔩 Staxo 100 †Used Shoring Frames in Top Condition! 🔩   Looking for stable, reliable, and ready-to-use Staxo 100 frames ? You’ve come to the right place!  Our used, galvanized shoring frames in 3-star quality have been professionally inspected, cleaned , and are ready for action †with only minor signs of use but maximum performance!    Why choose our Staxo 100 frames? ✅ Integrated access ladders †climb with ease!  ✅ Non-removable connection elements †stack smartly!  ✅ Suitable for medium to high loads †built to perform!    Available in two sizes: 📏 1.20m †for maximum reach! 📏 0.90m †compact & powerful!   💡 Get your hands on quality-tested shoring frames with smart technology today!  👉 Questions? We’re happy to help! P ...

SMIPack FP560A L sealer and shrink tunnel 2011, Semi auto L sealer, sealing bar 560mm x 430mm, max pack height 230mm, up to 1500 packs per hour, mobile, 1ph, then feeds onto SMIPack T450 shrink tunnel, adjustable temp and speed controls, mobile, 3Ph

General SKU215X087 MakeVMI TypeChariot Dalle T110 DE No.161551 Year of construction2011 LocationBarneveld Main Features MaterialStainless steel Motor3 KW Length1375 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length1375 mm Sizes stirring headø 175 mm Number of stirrers on shaft1 Motor3 kW, 230/400 volt, 1436 rpm, (Ex) With variable speed drivecheck Speed mixing shaft1500 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel 1.4307 (304L) Information Mounted on wheelscheck With switchcheck Floorspace1,25x1,40 m Total height2,30 m Weight450 kg CEcheck ATEX compatiblecheckStirrersVMI AgitatorMixers > StirrersBrand > VMI Agitator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

Rochman SVA6035 Sleeve wrapper with shrink tunnel Rochman shrink wrapper, 600mm sealing bar, adjustable temperature and speed controls, once sealed feeds into SMIPack T650EF shrink tunnel, max product height 300mm, 3Ph

SMIPack BP600 Monoblock semi auto shrink wrapper with sealing bar 2013, Monoblock semi auto shrink wrapper with sealing bar, sealing bar 550mm, max output 10 packs per min, max product height 380mm, 3Ph

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P177 Profile dimensions: 100 x 75 x 3.0 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 9,900 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

-Manufacturer: Trotec - Model: Speedy100c-8063 -Date of manufacture: August 2022 -Serial number: S1-7145 -45 watts CO2 -230 V -50 Hz -with autofocus -with air conditioning - with 2.0" lens -with cutting table 12.7 mm -with performance upgrade -with X-axis with 2 carriages -Rulers in mm incl.: -Suction -Manufacturer: Aigner/Trotec -Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 -8247 Exhaust Connection Cable -Suction operating hours: approx. 1639h Shipping available on request. Sale only to tradespeople.

gebr. Table milling machine ALDINGER Type: S 15 Year: 1959 Engine power: 4 / 5 hp (2.94 / 3.7 kW) Doubling the speed via selector switch Left/right rotation via selector switch 6 Speeds: 2,800 / 3,500 / 4,500 / 5,600 / 7,000 / 9,000 rpm Height adjustment by handwheel Extraction connection: 120 mm Table size: 95 x 105 cm Table height: 85 cm 525 kg Unoverhauled - ACTUAL state from carpentry dissolution FIXED PRICE

Yanmar SV60-A excavator, Technical specifications:, - Year of construction: 2020, - Transport weight: 5,560 kg, - Operating weight: 5,635 kg, - Rubber track width: 400 mm, - Digging depth: 3.91 m, - Engine power: 32.6 kW, - Displacement: 1,995 l

CONTROLS   CNC controls BASIC FUNCTIONS   number of spindles: 8 WORKING RANGE TURNING   bar diameter (max): 32 mm   worpiece length max.: 100 mm MAIN SPINDLE   spindle revolutions (min): 450 /min   spindle revolutions (max): 3250 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4130 mm   space requirements -front/back-: 1600 mm

- Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

- Producer Venjakob - Type VEN SPRAY Compact - Year of construction 2007 - Working width 800mm (1000) mm - Operating side, left - Duo gun drive system - Dry filter system - Exhaust air 7.000 m³/h - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system Siemens HMI Panel, new in 2023 - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin - Supply air box - Switch cabinet built into the machine - Voltage / HZ 400 / 50 - Location, not on stock

- Producer Venjakob - Type VEN SPRAY Smart - Year of construction 2012 - Working width 1300 mm - Part light curtain, scanner LS 25 - Operating side, right - Prize for overhauled machine - Actuel condition, machine is overhauled, very good condition - Duo gun drive system - Dry filter system Typ. 7000 - Diameter exhaust air pipe 400 mm - Exhaust air 7.000 m³/h - Feed speed adjustable 2,5 - 7,5 m/min - Belt cleaning system R1 - Lacquer reclaiming system with v-belt R1 - Gun control system Siemens S7 mit LS25 - PLC control with touch screen Siemens - Number of installed lacquer circles 1 Stk. - Number of installed spraying guns 4 Stk. - Number of lacquer pumps 1 Stk. - Supply air box G5 - Length 3.630 mm - Width 3.450 mm - Total connection power 13 KW - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Weight ~ 3.700 kg - Voltage fluctuation max. +/- 5 %

- Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %

Photos are examples, not original photos. - Producer Venjakob - Type VEN SPRAY COMFORT - Year of construction 2005 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Dust removing system on infeed conveyor - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 6000 - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - Number of lacquer pumps 2 Stk. - Producer lacquer pump Kremlin - Supply air box - Switch cabinet built into the machine - Voltage / HZ 400 / 50 - Location, on stock

with light barriers in the infeed area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-saving standby mode with almost closed mirror halves. The cooling fan is frequency controlled and is controlled by temperature sensors. Operation via a Siemens panel. - Producer Venjakob - Type VEN DRY UV Surround - Year of construction 2012 - Standby operation % - Working width 1.300 mm - Operationside left - Number of lamp from top 1 Stk. - For mercury lamps - For edge drying - Electic capacity lamp 120 W/cm - Electic capacity lamp infinitely variable 50 - 120 W/cm - Length belt conveyor - Fan, exhaust air regalbar bis max. 3.200 m³/h - Feed speed adjustable 2,5 - 7,5 m/min - Length 2.000 mm - Width 2.700 mm - Total connection power ~ 22 kW - Location - Voltage / HZ 400/50

- Producer Cefa/Sorbini - Type SMARTCOATER MF - Year of construction 2005 - Working width 1.300 mm - Working height 880 mm - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for lacquer 50 - 60 Shore - roller diameter 250 mm - Qick changes system for roller - Metering roller 173 mm - Double diaphragm pump Wagner ZIP 80, 1 Stk. - Length 900 mm - Width 3.000 mm - Height 1.500 mm - Loading gauge im meter 1 x 3 x 1,5 m - Mobile, with flange of wheel - Feed speed ~ 4 - 20 m/min - Total connection power 3,4 kW - Weight 1.520 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock ab kW 34-2019 - Voltage fluctuation max. +/- 5 %

- Producer Cefa/Sorbini - Type SMARTCOATER MF - Year of construction 2007 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height 880 mm - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for lacquer 50 - 60 Shore - roller diameter 250 mm - Qick changes system for roller - Metering roller 173 mm - Double diaphragm pump Wagner ZIP 80, 1 Stk. - Length 900 mm - Width 3.000 mm - Height 1.500 mm - Loading gauge im meter 1 x 3 x 1,5 m - Mobile, with flange of wheel - Feed speed ~ 4 - 20 m/min - Total connection power 3,4 kW - Weight 1.520 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock ab kW 34-2019 - Voltage fluctuation max. +/- 5 %

- Producer Cefla / Sorbini - Type T / 20-SP-1 - Year of construction 1997 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 174 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1640 mm - Width 2590 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 4,5 kW - Weight 2.000 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, not on stock

- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2007 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, on stock

- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2003 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, on stock

A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.

Manitou MT1033 Easy 75D ST5 S1 Telescopic Loader, - Year of construction: 2021, - Nominal power: 55.40 kW, - Net weight: 7950 kg, - Maximum speed 20 km/h, - Range: 7.15 m, - Hook height: 9.98 m

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

- drie aangedreven rollen - de twee onderste rollen zijn verstelbaar Dia rolls: 117/227 mm Dia of die mandrel: 30 mm Rotationspeed: 20 rpm Motorpower: 2 HP Length : 900 mm Depth: 680 mm Height: 1360 mm Weight: 200 kg

Router R8, large table, ready for demonstration from the site.

TBVE (TVE-ESCALE) ESCALE – Three Bath Open Width Washer Model: High Efficiency Washing Range (Washing Range – ESCALE) Manufacturer: TVE-ESCALE (TBVE Group) Year of manufacture: 2023 Condition: Good, fully operational Configuration: 3-bath open width washer with 3 evacuation (vacuum) slots – one per scour bath Documentation: Manual available Status: Available for sale Three heated wash bays, counter flow, working width of 2800mm fabric specs of 100gsm – 400 gsm (can be used on heavier cloth successfully) all plc controlled with three evac slots (one on each wash bay) input from roll or plated, output plated. --------------------------------------------------------------- Machine Description The TVE-ESCALE High Efficiency Washing Range is an industrial open-width textile washer designed for high-quality washing, scouring, and bleaching of fabrics. The system combines bath ...

Please refer to Fig. 2 for technical data

Please refer to Fig. 2 for technical data

Please refer to Fig. 2 for technical data

Please refer to Fig. 2 for technical data

Radio Shuttle pallet rack, 2 blocks of 312 storage spaces (total 624 spaces), max. pallet weight 1.000kg, for Euro and industrial pallets, 3 pcs Shuttles Stow Atlas 3.1 – used -: Price for 2 blocks and 3 radio shuttles from the location: 49.950.-€ (net), incl. dismantling etc.! Price for purchase of 1 block and 1 radio shuttle: 25.000.-€ (net) incl. dismantling etc.! Price Extra Radio Shuttle: 15.000.-€ (net). Manufacturer shelf: Stow Type: Atlas Shuttle 3.1 / Radio Shuttle Regal Year of Make: 2021 Stand Type: PLFB 15 Pallet type: Euro or industrial pallet Clear shelving width: 1,350mm Truss Type: SRBH 0488 Channel rail type: SRR 0130 Stand height: 6,300mm Number of channels / Euro pallets on top of each other: 4 Number of Euro pallets in a row per channel: 13 (11 industrial pallets) Permissible pallet load: 1,000kg Permissible shelf load (sum of channel  ...

Please refer to Fig. 2 for technical data

Spiral mixer dough mixer Diosna SP40D A used Diosna SP40D spiral mixer for 40Kg dough is currently for sale and immediately available in our warehouse. Diosna SP40D Spiral mixer for 40Kg dough - Spiral mixer Diosna model SP40D - With stainless steel boiler and spiral - for max. 40 kg dough - With 2 speed settings - With 2 timers - Capacity 68 liters - Machine mobile with brake - 16 A CEE plug 400 volts