128,440 used machines on RESALE, but how to find them? Machine Search
Spectrometer SPECTROBLUE FMX36 of the company AMETEK Find more here - /
The plant was installed in 2011. Vacuum conveying system operated by VOLKMANN, for grinding products in a HOSOKAWA sieve mill with enclosed metal detection. In addition available: BUSCH vacuum pump, KAESER compressor, VALCO dust extraction system, MOTEC suction device for product feeding table and much more. All components (except the exhaust system BJ 2009 and the HOSOKAWA Bexmill 200 Year ca. 2006) are from this year. There are no recorded operating hours, but should be around 6000h. The plant was decommissioned in 2019. The plant has been cleaned and disassembled. But could be put into operation for a demonstration or for recording presentation videos. Find more here - /
Steam turbine for sale. The turbine was built in 2012, is in good condition and is no longer in operation. Model SST-060 Turbine with impeller in so-called constant-pressure design ("action wheel"). The turbine rotor is mounted on two bearings and consists of the above-mentioned impeller and a shaft, which are connected to each other by means of Hirth gearing. The impeller is located outside the bearing and consists of one piece. The blades are milled out of the solid disc. Live steam pressure: 13.0 ´bara at turbine flange Live steam temperature: 191.6 ´C at turbine flange Live steam flow max: 10,000 kg/h Exhaust steam pressure: 5.2 bara at turbine exhaust flange Turbo generator sound pressure level: 92 dB(A) z 3 dB(A) measured at a distance of 1 m Coupling power: 275kW Total terminal power: The tolerance is 1.0%. 265kWe The pressure drop for the cyclone to be provided sh ...
It is a vacuum conveying system with a conveying capacity of approx. 1 ton per hour. Vacuum conveying and product feeding table is from VOLKMANN. Dust extraction at the product feeding table is from MOTEC Dust extraction system from VALCO Compressed air from KAESER Vacuum pump from BUSCH Metal separator from MESOTRONIC Sieve mill from HOSOKAWA BEPEX The products are fed onto the sieve mill and then fall by gravity into a bigbag (bigbag rack and pallet scale are also part of the system). The plant is currently cleaned and thus partly dismantled. However, it could be put into operation as a demonstration. Find more here - / Contact us at -
ALUKAP350 machine, manufactured in 2012 by K.SCHULTEN GMBH from Germany. The 2012 K. Schulten GmbH AluKap350 is a specialized industrial machine produced by K. Schulten GmbH, a German manufacturer known for its expertise in producing machinery and components for industrial applications, particularly in aluminum processing. The AluKap350 is typically associated with aluminum profile cutting and processing. Machines like this are designed to handle precision cutting and processing of aluminum parts, which are widely used in industries such as construction, automotive, and manufacturing. The model number, 350, might refer to specific technical characteristics, such as the cutting capacity, blade size, or processing capabilities. Key features of a machine like the AluKap350 could include: Precision Cutting: The ability to cut aluminum profiles accurately and efficiently. High Throughput ...
2013 SEPARFLEX 250 A Automatic water separator Find more here - / Contact us at -
HEATSET 3 SUPERBA 2015 72 POSITION - type/dimensions of tube - 7,3 29,2 cm. - type of friction roller (slick or with growed) - This is not friction machine. This is an Heat Set machine. To make carpet yarns. Friction machine is for POY yarn prodution. Find more here - / Contact us at -
Screening system The parts list of the screening system. The system was initially operated with a generator and now has a permanent power connection. - Vibratory conveyor trough with double balancing drive - Single deck vibrating screen SEWU 2400x5000 - Industrial trailer with all-wheel steering and swing axles, mechanical support feet, payload 47 tons - Steinert overband magnetic separator UMP 90 180 W - Trough conveyor belt, center distance 13 m, belt width 2 m - MTS conveyor belt scale in the fine grain belt - Draabe Luftfeuchtungsystem MyFog Find more here - / Contact us at -
Dissolving station for copper cyanide The dosing system was designed according to drawing no. A10690 for the preparation of calcium cyanide and copper cyanide solution. The tank has a volume of approx. 1170 litres and is filled with water via an angle seat valve and with beads/scales/flakes via a feed screw. The dilution water is filled via a solenoid valve and a downstream angle-seat valve for volume adjustment. A spray nozzle in the aeration and deaeration dome prevents vapours from escaping when filling the tank. The water supply is shut off by a ball valve and the flow rate is adjusted by an angle seat valve. The extraction is switched on or off via the control unit. The feed screw first conveys the dry material into a two-stage shredder. From there, the dry material enters the container. The quantity of dry material conveyed is regulated via a slide valve on the feed screw. A su ...
used
SMT soldering oven 1.7 PC N2 is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety Find more here - / Contact us at -
SFC. Isolator SFC 10 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -
- SFE. Superfast 2x18L CO2 Extraction System manufactured by Thar Process. The supercritical fluid extraction system is designed to extract oil, oleoresins, and other ingredients which become soluble in supercritical CO2 at high pressure and temperature. SFC. Isolator SFC 20 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -
Sheet metal processing system P 315 / 1991 105327 Ai P4-1812+HPT 2015 + R51 272/ 1991 S4.30 / 1998 Find more here - / Contact us at -
Electroplating test system for high flow / separation It does not have a control/transport cart and has not yet been used. That was our model system. It is a separator bath with 3 positions The positions are designed for vertical and horizontal arrival including a 25mm movement of goods. The buyer can view the system, and also dismantle it. High-performance test containers for ViaFill and AR 1:40 Features: - Aspect ratio up to 1:40 - Multifunctional system for panel & pattern plating, blind micro via plating, via filling plating, button and bridge plating - Suitable for flex circuit substrates up to 6.2 mm thick - Segmented anodes with 3 inert anodes per PCB - 372 slots for eductors with horizontal flow per PCB - Two-dimensional fabric movement in the copper cell The copper cell: Our copper cell is designed for PCBs from 18" x 25" to 21" x 24". Hydrodynamic conditions are gu ...
2020 Giardiana DUAL TECH 420 SBC DRY Find more here - / Contact us at -
Essemtec SP600 SMT stencil printer Find more here - / Contact us at -
Loader-unloader system Was still in use until about 2 years ago and fully functional until the end. Type ISU210S and ISL175S Find more here - / Contact us at -
2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data ...
2001 Kasto KASTOFUNCTIONAL A Kastofunctional type 6420 (year 2001) GHA SCH Cutting range max. 260 mm Mitre angle +/- 45° Drive power 1.5 kW 2000 Kasto SSB 260 VA-CC Kasto automatic band saw SSB 260 VA (year 2000) GGA Cutting range max. 260 mm - Automatic material feed - Infeed and outfeed - roller conveyors Drive power 4 kW
1986 Forte SBA 401.S 1. designation of the machine Forte band saw 400x400 mm 2. manufacturer of the machine: Forte 3. year of construction: 1986 4. intended use of the machine Sawing of metallic materials 5. current condition: Used, ready for operation on inspection TECHNCAL DATA Working range Rods and tubes up to 0 400 resp. Maximum cut-off length 600 mm Double feed 1. 200 mm Power requirement ca. 9,5 KW Sage drive motor power 4, 7 / 6 K I Gearbox for Sage drive Stober R 65VI•/ 4 Cutting speed I 12 - 50 m/min. Cutting speed Il 24 - 100 m/min. Sage belt dimension 6.200 x 38 x 1,2 mm Hydraulic oil ca. 46 Liter Viscositat 68 est bei 4□0c ca. 50 Liter (empfohlen "Curtis S 6") ca. 3.000 kg Coolant 800 mm Weight of the machine Material support height Find more here - / Contact us at -
2019 WK Systemtechnik ILS 600 – HTL – Ionline Lubrication System Dickschickt preservation system. The oil is applied via nozzles The spray system is a minimum quantity spray system for high-precision dosing of preservative oil. With the spray system you can be coated or oiled reproducibly. By spraying using two-substance nozzles, the finest layer thicknesses can be applied without contact and a wide viscosity range can be covered. The forming medium is in a closed circuit; the excess pressure created by the spray air in the chamber is sucked off at the inlet and outlet using a vacuum lock, so there is no environmental pollution. General data Dimensions (WxHxD) without conveyor units 2486mmx2080mmx2722mm Dimensions with open doors 3265mmx3510mmx2722mm Weight approx. 2500 KG Electrical connection Supply voltage 400 Volt / 50 Hz Power 15kVA Fuse protection 35 A Control v ...
Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...
We are pleased to offer a high-performance Cold Knife Scoring System manufactured in 2014. This machine is ideal for precise cutting and scoring applications in various industrial sectors, including automotive manufacturing. Technical Details: - Dimensions (L x W x H): 3800 mm x 3200 mm x 2700 mm - Weight: 6000 kg - Table Size: Approximately 1500 mm x 700 mm - Number of Robots: 1 - Number of Workstations: 2 - Table Type: Fixed table Power and Control: - Operating Voltage: 3x400 V AC / N / PE - Control Voltage: 24 V DC - Frequency: 50 Hz - Total Power Consumption: 15 VA - Rated Current: 63 A - Pneumatic Pressure: 6 bar
The Stanzvorrichtung TrimStar 250kN is a high-performance stamping machine designed for precision and efficiency in manufacturing processes. This machine is tailored for heavy-duty applications, particularly in the automotive industry. Hydraulic Pressure: - Max Pressure: 180 bar - Operating Pressure: 150 bar Power: 25 kW Operating Frequency: 50 Hz Connection Voltage: 3 x 400 V Full Hydraulic System Installation Dimensions (L x W x H): 4700 mm x 2790 mm x 4850 mm Weight: 18,000 kg Find more here - / Contact us at -
AFS Corona Pre-Treatment system Type (Typ): G 60 M Input (Eingang): - Voltage (V): 400 - Current (A): 16 - Frequency (Hz): 50/60 Output (Ausgang): - Power (W): 6000 Technical Data Roller Width: 2700 mm Electrode Width: 2500 mm Maximum Mechanical Speed: 250 m/min Maximum Generator Power: 6 kW / 1 & 5 Core Operation Electrode Type: Ceramic Electrodes Discharge Roller: Ceramic Roller Drive Type: Driven Discharge Roller Cooling Type: Water-cooled Pre-treatment Direction: Controllable via web path Pressure Rollers: Present on both sides Find more here - / Contact us at -
Model : 41-SERIE-1350-WRDW Weight of Machine Parts - Machine: Approx. 7,000 kg - Conveyor table: Approx. 1,050 kg (without motor) - First contact rollers: Approx. 160 kg - Tension roll: Approx. 75 kg Find more here - / Contact us at -
Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...
Key Equipment Specification: 1 of Gas Turbine: Manufacturer: Solar Model: Titan 130 Operating hours: 3000 Variant: 20501 GSC Combustion Standard: Non Solonox (conventional) Year Of Manufacture: 2012 Rated Output: 15MW Fuel: Gas Only 1 of Speed Reduction Gear Box: • Manufacturer: Solar Turbines • Type : EPICYCLIC • Ratio: 7.4648:1 • Rated Power : 26,251HP • Input Speed1; 11,197RPM • Output Speed : 1,500RPM • Overload Factor: 1.1 • 1 of Generator: • Manufacturer: ABB • Rated Output: 22,789 KVA • Power Factor: 0.8 • Voltage: 11KV • Frequency: 50Hz • Speed: 1,500RPM SCOPE Gas Turbine Assembly (Non SoLoNox) Speed Reduction Gear Assembly Shaft Coupling Exhaust Gas System Enclosure Ventilation System Generator Air Inlet System Fuel Supply System. SCOPE Colling Water System Compressed Air System Fire Fighting Syste ...
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
- Type: Aqua Mammut ( Parts Washing System ) - System Type: Front Loader --------------------------------------------------------------- Specifications: - Empty Weight: 1,700 kg - Load Capacity: 700 kg - Dimensions (Closed): 2,150 x 2,700 x 1,850 mm (H x W x D) - Dimensions (Open): 2,150 x 2,700 x 2,950 mm (H x W x D) - Basket Size: 1,000 x 1,500 mm - Usable Height: 350 mm - Maximum Filling Quantity: 175 l - Performance: 2 x 7.5 kW (3 x 400 V/50 Hz) - Maximum Operating Temperature: 75°C Find more here - / Contact us at -
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...
With Win XP, Fobagraf and MarkUs, Z-axis, rotary axis for interior and exterior lettering. MarkUs with camera for point and shoot, fiber laser with approx. 10,000 hours, laser power 50.4W Lens 163mm, ( 100+254mm possible ) Dimensions L x W x H: 90.00cm x 114.00cm x 172.00cm Lifting door opening via compressed air, size 80x30cm Vario S – Housing with side door – Automatic start via button on the front right Stable monitor arm with keyboard and mouse Interior with Z-axis, rotary axis, interior lighting with socket, camera with red illumination, flex extraction arm
Offer 24589 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Offer 24600 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Offer 24603 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 10 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Offer 24604 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 1 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! ...
with computer control Band width: approx. 63cm Band length: 75cm extendable on one side to 110cm Different belt speeds Roll gap 0.5-45mm with trawl net and knitting board Machine completely stainless steel - Ribbons new - Tested and cleaned
Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton
Key data: 206 KW, 500 kVA, 400 V
Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018
STEAM BOILER 50 TONS SERIAL NO. BMWT0465 BOILER CAPACITY 50,000 KG/HR BOILER MODEL BMVG 50-25 YEAR OF MANUFATURE 2015 JKKP APPROVAL NO. JKKP IS 127/453/1-201527025 HT PRESSURE 3750 kPa DESIGN PRESSURE 2500 kPa DESIGN CODE BS 1113:1999 THIRD PARTY ABS CONSULTING Email Contact: supawadee@greatglove.com phone number: +6693 7478585
Sell Fenwick S30W diesel sideloader, 3 Ton capacity, telescopic forks, maximum height 5.3 meters, 3021 hours, Up-to-date revisions. Video on Demand
maximum number of results exceeded
please refine your search
