131,120 used machines on RESALE, but how to find them? Machine Search
Permanent magnet motor, permanent magnet motor, electric motor, Perm.Magn-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg
General SKU268N286 LocationBarneveld MakeUnimix Haagen & Rinau Mischtechnik No.300903 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume72 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Closed stirring vesselcheck Capacity72 l. Vessel sizesø 400 x 400 mm Dished top sidecheck With covercheck Top connectionsDN 50 OutletDN 20 With jacket7,5 l. Max. temperature151 °C With paddle stirrercheck Motor2,2 kW 400 V (Ex) Speed mixing shaft28,5 rpm Stainless Steel Reactors MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Information Year of construction1994 With switchgearcheck (as is) Floorspace1,3 x 1,2 M Total height2,2 M Weight800 KG ATEX compatiblecheck Extra SpecificationsMax fill volume 35 ltr (minimal 9 ltr)Stainless Steel ReactorsUnimix H&RReactors > St ...
Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm
Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm
Dimeco 1675/D richtmachine met CNC-aanvoersysteem (cybelec) - breedte: 500 mm - maximale dikte: 1,6 mm
Round arch moulding machine from Schlebach in very good condition with infinitely variable speed adjustment, as well as left/right rotation. you will receive a proper invoice with VAT. Net price.
Key data: 3000 mm, 1 mm
Schechtl guillotine shears 3mx1.5mm with hand depth stop in top condition, price net.
General SKU363S879 MakeBühler AG (CH) TypeCobra 251 No.7576 Year of constructionunknown, manufacturer plate is missing LocationBarneveld Main Features MaterialMild steel Motor32 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 250 x 600 mm Inletdia. 25 mm Outletdia. 25 mm With jacketcheck Motor32 kW 220/380 Volt Without ballscheck MaterialMild steel Information With switchgear(as is) Floorspace1,7x0,9 M Total height1,8 M Weight1350 Kg Extra SpecificationsWith additional grinding chambers (2x), motor (1x), various inserts and parts. Sand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...
General SKU253S176 MakeBühler AG (CH) LocationBarneveld TypeCobra 501, SKR 440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel Information No.10129787 Year of constructionunknown With switchgear(as is) Floorspace2,1x1,1 M Total height2,6 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU234S119 MakeBühler Cobra 501 LocationBarneveld TypeSRK-440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 400/690 Volt Information No.10310055 Year of construction1999 With switchgearcheck Floorspace2,1x1,4 M Total height2,,6 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU241S147 MakeBühler Cobra 501 LocationBarneveld TypeSRK 440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia.320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt MaterialStainless steel Information No.10208703 Year of construction1992 With switchgear(as is) Floorspace2,3x1,6 M Total height2,8 M Weight2700 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU241S146 MakeBühler Cobra 501 LocationBarneveld TypeSRK 440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 Volt MaterialStainless steel Information No.10208704 Year of construction1992 With switchgearcheck Floorspace2,2x1,5 M Total height2,8 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Power: 80 kW, Net weight: 4800 kg
ACME 8 Dough Sheeter Model 8 115V Includes: 9' and 12" Plates, Light and Heavy Moulding Chains Full Refurbished All New: Bearings, Belt, Drive Belt, Idler Gears, Molding Rails, Paint
Cleaned and tested, it has new belts and new scrapers overall in perfect condition.
The Rondo SSO 617 reversible dough sheeter is a high-quality commercial kitchen equipment designed for rolling and cutting dough in a professional setting. This durable and reliable machine from the trusted brand Rondo is specifically built for restaurant and food service establishments, making it a valuable addition to any baking and dough equipment collection.
We offer you a desktop 3D dental scanner from a current recycling. 1) Shining 3D 2) Terra 3) exocad 1) Desktop 3D Dental Scanner 2) Calculator 3) Licensed Software 1) AutoScan-DS-EX Pro H 2) Tower PC 3) DentalCAD Ultimate Lab Bundle Year of construction: 2025 (Acceptance) First registration: - Condition: very good Hours: - Asking price: 12.000,00 EURVHB Original price: 18.069,95 EUR Equipment / accessories / other information: Scanner Tower PC Asset Manager: Klaudius Giolbas Phone: 01722796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 40764 Langenfeld The sale is without warranty Subject to prior sale
Key data: 2250 mm, 14000 , 10500
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 1050 cm Depth: approx. 110 cm Length: approx. 1400 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 1050 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 4 Pallet spaces: 75 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 06 x Stand (approx. 1050 x 110 cm), pre-assembled 40 x trusses (approx. 270 x 12 x 5 cm) PNB0472 80 x Locking Pins Pri ...
Olimpia SE3BSTD paint wall Length 3000mm 2x cardboard filter Pint Foot Filters Filtration capacity ~ 11.000m3/H Motor power 2.2kw CE mark Dimensions 335x150x238cmH Net price
Vibrating Screening Machine Manufacturer: Vibra Schultheis Type VSB No. 07 327 2-cover screen, stainless steel 3x Screen frame without covering Diameter 60 cm Power 0.75 kW
Key data: 2250 mm, 30800 , 10500
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 1050 cm Depth: approx. 110 cm Length: approx. 3080 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 1050 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 4 Pallet spaces: 165 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 012 x Stand (approx. 1050 x 110 cm), pre-assembled 088 x Trusses (approx. 270 x 12 x 5 cm) PNB0472 176 x Locking Pins ...
Key data: 2250 mm, 30800 , 6900
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 690 cm Depth: approx. 110 cm Length: approx. 3080 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 690 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 3 Pallet spaces: 132 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 012 x Stand (approx. 690 x 110 cm), pre-assembled 066 x Trusses (approx. 270 x 12 x 5 cm) PNB0472 132 x Locking Pins Pr ...
Key data: 2250 mm, 30800 , 5200
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 520 cm Depth: approx. 110 cm Length: approx. 3080 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 520 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 2 Pallet spaces: 99 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 12 x stands (approx. 520 x 110 cm), pre-assembled 44 x trusses (approx. 270 x 12 x 5 cm) PNB0472 88 x Locking Pins Price ...
Sartorius Certomat BS-1 50mm Heated and Refrigerated Incubator Orbital Shaker 8865329 50 mm Orbital stirring mode: 50 mm diameter Stirring speed: 40 to 400 rpm Max. accuracy ±1% of the final value Incubation temperature: –10 °C to +70 °C External dimensions: 1150 x 720 x 770 mm Internal dimensions: 890 x 495 x 650 mm Weight: 198 kg Steel construction, stainless steel interior Brushless motor, triple eccentric drive with adjustable mass compensation Tray 800 x 420mm Max. load 20 kg, mass compensation depending on load Stacking Up to 3 units, without speed reduction Protection IP21 Electrical specifications Connection Class l cold socket, separate cable approx. 3 m Protection class l 230 V Heating capacity 650 W Cooling capacity 500 W In excellent working condition
Key data: 2250 mm, 50400 , 5200
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 520 cm Depth: approx. 110 cm Length: approx. 5040 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 520 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 2 Pallet spaces: 162 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 019 x Stand (approx. 520 x 110 cm), pre-assembled 072 x Trusses (approx. 270 x 12 x 5 cm) PNB0472 144 x Locking Pins Pr ...
Key data: 2250 mm, 50400 , 6900
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 690 cm Depth: approx. 110 cm Length: approx. 5040 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 690 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 3 Pallet spaces: 216 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 019 x Stand (approx. 690 x 110 cm), pre-assembled 108 x trusses (approx. 270 x 12 x 5 cm) PNB0472 216 x Locking Pins Pr ...
Key data: 2250 mm, 50400 , 10500
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 1050 cm Depth: approx. 110 cm Length: approx. 5040 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 1050 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 4 Pallet spaces: 270 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 019 x Stand (approx. 1050 x 110 cm), pre-assembled 144 x trusses (approx. 270 x 12 x 5 cm) PNB0472 288 x Locking Pins ...
Key data: 2250 mm, 100800 , 5200
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 520 cm Depth: approx. 110 cm Length: approx. 10080 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 520 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 2 Pallet spaces: 333 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 037 x Stand (approx. 520 x 110 cm), pre-assembled 144 x trusses (approx. 270 x 12 x 5 cm) PNB0472 288 x Locking Pins P ...
Grain sampler type 1938 DRP, 1/4 liter prober With wooden case, complete with tripod (lower part), hollow measure, filling tube, knife, flow weight, scale with tripod and weight tray With full set of weights (100g, 50g, 2x20g, 10g, 5g, 2x2g, 1g, 500mg; Very good condition: tested, calibrated and recalibrated 2026 (valid until 2030). The device was calibrated, not the scales and the weights. We recommend using a calibrated laboratory scale, which we can offer to match.
Key data: 2250 mm, 100800 , 10500
This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 1050 cm Depth: approx. 110 cm Length: approx. 10080 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 1050 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 4 Pallet spaces: 540 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 037 x Stand (approx. 1050 x 110 cm), pre-assembled 288 x trusses (approx. 270 x 12 x 5 cm) PNB0472 576 x Locking Pins ...
Excellent condition - Fully operational - Loading / Transport possible! Workpiece: Max. clamping diam. 26 mm 9 main spindles: Spindle 1 to 6: rated torque 18,5 Nm max. torque 50 Nm Max. speed 7,000 rpm Spindles 7 to 9: rated torque 15 Nm max. torque 30 Nm Max. Speed 10,000 rpm Travels (cross slide): X (spindles 1 to 6): 70 mm X (spindles 8 to 9): 110 mm Z: 125 mm Feeds: 30 m/min Feed power: 3kN Travels (longitudinal slide): X: 16 mm Z: 300 mm Feed power 3kN Feeds: 30 m/min CNC Siemens 840 D Swarf conveyor and chiller 21,1 Kw Knoll chiller With CUCCHI compact bar feeder 26 mm (rounded), 19 mm (squared), 22 mm (hexagonal) bar length: 4200 mm
Qty. 1 Second-hand Aluminium Slitting Line Manufacturer: Stamco Inc., USA Year of Manufacturing: 1981 Strip Width: 1828 mm (72”) Trim 1981 mm (78”) Untrim Thickness: 0.2 mm to 1.27 mm (0.003” to 0.050”) Line Speed: 304 m/min - 609 m/min Thread Speed: 15 m/min Input/Output Coil Weight – 10 T Input Coil OD: 2400 mm (96”) Input Coil ID: 508 mm (20”) Capacity: 8 cuts of 1.27 mm and 10 cuts of 0.9144 at line speed 304 m/min 13 uts of 0.6 mm and 21 cuts of 0.25 mm at line speed 609 m/min
used) | Very well maintained machine directly from the user | Machine has only run with oil | Operating hours around | FANUC 16i-T control with 9 axes | 9 axes (X / C1 / Y / E / B / A / X / C2) | Bar Ø max. 20 mm | Turning length max. 205 mm / 195mm | Main spindle, max. speed 10,000 rpm, C-axis | Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis | 4-fold tool holder | 3 cross drilling units | Turret with 8 stations | Various additional tool holders, quills | parts conveyor belt | Machine coolant: oil | Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm | The machine can be inspected by appointment. | Changes and errors in the technical data and information as well as prior sale reserved!
used MORI SEIKI NL 2500/1250 CNC lathe, manufactured in 2006, is for sale. It is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG loading magazine for automatic bar feeding. | Technical specifications | Control system: MORI SEIKI MSX 850III / MAPPS III | Country of origin: Japan | Type: Slant-bed CNC lathe | Centre distance: 1,250 mm | Max. turning length: 1,298 mm | Max. turning diameter: 356 mm | Standard turning diameter: 275 mm | Swivel diameter over bed: 923 mm | X-axis: 260 mm | Z-axis: 1,345 mm | Spindle speed: up to 4,000 rpm | Spindle bore: approx. 80 mm | Turret: 12-station | Number of turrets: 1 | Chip conveyor | Powered tools | C-axis | Y-axis | Machine weight: 7,600 kg | Machine dimensions: 5,000 x 2,300 x 2,400 mm | The machine can be viewed in operation by appointment. | Subject to changes and errors in the technical data and specification ...
used) | Very well maintained machine directly from the user | Machine has only run with oil | Operating hours around 69500 | FANUC 16i-T control with 9 axes | 9 axes (X / C1 / Y / E / B / A / X / C2) | Bar Ø max. 20 mm | Turning length max. 205 mm / 195mm | Main spindle, max. speed 10,000 rpm, C-axis | Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis | 4-fold tool holder | 3 cross drilling units | Turret with 8 stations | Various additional tool holders, quills | parts conveyor belt | Machine coolant: oil | Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm | The machine can be inspected by appointment. | Changes and errors in the technical data and information as well as prior sale reserved!
Operating hours: 86760 | Technical data | - Number of axes: 5 | - Number of spindles: 2 | MAIN SPINDLE | - Max. bar diameter: 16 [mm] | - Z-axis travel: 140 [mm] | - Spindle speed: 8000 [rpm] | - Spindle drive power: 2.2 [kW] | - Number of tool positions: 13 | COUNTER SPINDLE | - Max. bar diameter: 10 [mm] | - Spindle speed: 8000 [rpm] | - Number of tool positions: 4 | FMB Turbo 3-26 bar loading magazine | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
Year of manufacture: 2007 | Machine type: CNC Swiss-type sliding headstock lathe | Control: Fanuc, Series 18i-TB | Power-on hours: 20,279 h | Operating hours: 67,058 h | Technical Data | Machining capacity: | Max. turning diameter: Ø 20 mm (optional up to Ø 22 mm) | Max. turning length: 205 mm | Main spindle: | Speed: up to approx. 10,000–12,000 rpm | Power: approx. 3.7–5.5 kW | C-axis | Sub-spindle: | Speed: up to approx. 6,000–8,000 rpm | C-axis | Axes configuration: | X1 / Z1 / Y1 (main machining) | X2 / Z2 (sub-spindle) | Rapid traverse: approx. 24–30 m/min | Machine dimensions & weight | Dimensions (L × W × H): 2400 × 1205 × 1700 mm | Machine weight: approx. 2,200 kg | Subject to prior sale, changes and errors in technical data and specifications excepted.
used CNC sliding headstock lathe STAR SR20R, year 2005 | control, make Fanuc, series 18i-T, | 7 axes (X/Z/Y/C1/X1/Z1(C2), | bar-Ø max. 20 mm, | turning length max. 205 mm, | main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, | counter spindle with collet, speed max. 8.000 rpm, C-axis, | tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), | parts conveyor belt, | standard guide bush unit | loading magazine IEMCA Boss 332E, year 2005 | Machine coolant: oil. | Extinguishing system Bosch | High pressure unit Büchel SF System SN 510020, 60 bar | The machine can be inspected under power by appointment. | Changes and errors in the technical data and information as well as | subject to prior sale!
Used. Star SR - 32 | Year 1998 | Operating hours 60931 | Control: CNC Fanuc 18i Tb | Machining diameter: max. 32mm | Maximum workpiece length: 125 mm | Headstock travel: 310 mm | C-axis: 1° | Number of axes: 7 | Drilling capacity fixed tool diameter: 13 mm | Drilling capacity rotating tool diameter: 8 mm | Tapping: M12 (with driven tool M6) | Milling capacity: Ø 10 mm | Spindle speeds: 350 - 7000 (driven and smooth tools) | Coolant used in the machine: Oil | CE declaration of conformity | Operating and maintenance manual | Operating tools | According to the sender: Fanuc transverse drive system defective and was deactivated by Star Micronics. | Machine dimensions 1700x2512x1700 mm | Weight of the machine 2900 kg | Bar feeder FMB TURBO 5-42. | Bar capacity 5-42 mm attachment variant A | Hinged belt conveyor MAYFRAN | Small extinguishing system Kraft and Bauer and extinguishing agent con ...
Year of manufacture: 2004 | Technical data | Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) | Max. bar diameter: 12.7 mm | Max. turning length: 120 mm | Rapid traverse speeds: X-axis (linear): 40 m/min | Linear motor cooling: Separate cooling unit for thermal stabilisation of the linear drive. | Z-axis: 30 m/min | Main spindle speed range: 0 – 12,000 rpm | Drive power: 3.7 / 5.5 kW | C-axis: 0.001° resolution for high-precision milling operations | Counter-spindle speed range: 0 – 12,000 rpm | Travel range Z2: 150 mm | C-axis: Fully-fledged C-axis integrated | Tool carrier (linear slide system) | Total number of tools: up to 18 positions | Driven tools: 3 to 5 positions for cross-machining | Speed of driven tools: max. 6,000 rpm | Loading magazine: FMB Minimag for the diameter range of 2 to 23 mm. | Bar length: 3,020 mm | Chip conveyor | Small fire extinguishing system / Kraft ...
Year of manufacture: 2004 | Control system: Fanuc 16i-TB | Technical specifications | MAIN SPINDLE | - Max. bar diameter: 12 (15) [mm] | - Travel: 120 [mm] | - Spindle speed: 12,000 [rpm] | - Spindle drive power: 3.7 [kW] | - Torque: 6 Nm | COUNTER SPINDLE | - Max. bar diameter: 12 (15) [mm] | - Spindle speed: 12,000 [rpm] | - Spindle drive power: 3.7 [kW] | - Torque: 6 Nm | Powered tools: | Tool drive power: 1.1 kW | Max. speed: 6,000 rpm | Tools: | Number of tools: up to 20 (some of which are driven). | Driven tools: 4–6, for milling, drilling and threading operations. | Tool holder: ER collets or similar systems. | Rear machining: 4 stations | IEMCA Smart 316 / 32L bar feeder | Year of manufacture: 2006 | Bar diameter: 5–32 [mm] | Bar length: 3200 [mm] | Small fire extinguishing system / Kraft und Bauer fire extinguishing systems | Operating manual | Parts separator | Chip flushin ...
Machine dimensions 2400x1205x1700 mm | Machine weight 2200 kg | FMB IEMCA BOSS 332E loading magazine | Fire extinguishing system | The machine can be viewed by appointment. | We reserve the right to make changes to the technical data and specifications, and to sell the item in the meantime.
Year of manufacture: 12_2006 | Control system: Fanuc 18i-TB | Technical specifications | Max. turning diameter: Ø 20 mm (optional up to Ø 22 mm) | Turning length: 205 mm | Main spindle: | • Speed: up to approx. 10,000–12,000 rpm | • Power: approx. 3.7–5.5 kW | • C-axis for contour machining | Counter spindle: | • Speed: up to approx. 6,000–8,000 rpm | • C-axis | Axes (travel ranges): | • X1 / Z1 / Y1 (main machining): X1 approx. 265 mm / Z1 approx. 205 mm / Y1 ± 20 mm | • X2 / Z2 (counter spindle): similar to main axis, exact values depend on machine | • Rapid traverse: approx. 24–30 m/min | Machine dimensions: 2,400 × 1,205 × 1,700 mm | Machine weight: approx. 2,200 kg | Bar loading magazine: FMB TURBO 3-26/3200 | Chip conveyor | Viewing: The machine can be viewed on site by appointment. | Note: Subject to changes and errors in the technical data, and prior ...
used CNC sliding headstock lathe STAR SR20R, year 2001 | control, make Fanuc, series 18i-T, | 7 axes (X/Z/Y/C1/X1/Z1(C2), | bar-Ø max. 20 mm, | turning length max. 205 mm, | main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, | counter spindle with collet, speed max. 8.000 rpm, C-axis, | tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), | parts conveyor belt, | standard guide bush unit | loading magazine IEMCA G-226/32, year 2001 | Machine coolant: oil. | Extinguishing system Bosch | The machine can be inspected under power by appointment. | Changes and errors in the technical data and information as well as | subject to prior sale!
used: oil | Weight: 6.25 tonnes | Dimensions: (LxWxH) 3477x1860x1865 mm | The machine can be viewed under power by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
used) | Very well maintained machine directly from the user | Machine has only run with oil | Operating hours around 78,000 hours | FANUC 16i-T control with 9 axes, | 9 axes (X / C1 / Y / E / B / A / X / C2), | Bar Ø max. 20 mm | Turning length max. 205 mm / 195mm, | Main spindle, max. speed 10,000 rpm, C-axis, | Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis, | 4-fold tool holder | 3 cross drilling units | Turret with 8 stations | Various additional tool holders, quills, | parts conveyor belt | Tank capacity 170L | Machine coolant: oil | Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm Year of construction 1999 | Fire extinguishing system Kraft & Bauer / GUT fire protection | Mayfran chip conveyor | The machine can be inspected by appointment. | Changes and errors in the technical data and information as well as prior sale reserved!
Used CNC Swiss type lathe STAR SR32-JN New, year 2015 | control, make Fanuc, series 32i-B, | 7 axes (X/Z/Y/C1/X1/Z1/C2, | bar-Ø max. 32 mm, | turning length max. 80 mm, | main spindle, speed max. 7.000 rpm, C-axis 0,001 degree, | backspindle Ø max. 32 mm, | speed max. 7.000 rpm, C-axis, | tool holder for a total of 23 tools (linear tool holder, front attachment, rear machining), | parts conveyor belt, | Mayfran chip conveyor, | Service-Set Emulsionspackage | barloader magazine FMB turbo 3-36/3200 / A /accesories to support | turning without guide bush. | Use of coolant in the machine: emulsion | The machine can be inspected under power by appointment. | Changes and errors in the technical data and information and subject to prior sale!
Operating hours: 47,000 | Technical data | - Number of axes: 5 | - Number of spindles: 2 | MAIN SPINDLE | - Max. bar diameter: 12 [mm] | - Z-axis travel: 140 [mm] | - Spindle speed: 8000 [rpm] | - Spindle drive power: 2.2 [kW] | - Number of tool positions: 13 | COUNTER SPINDLE | - Max. bar diameter: 10 [mm] | - Spindle speed: 8000 [rpm] | - Number of tool positions: 4 | FMB Minimag bar loading magazine | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
Operating hours: 60,000 | Technical data | - Number of axes: 5 | - Number of spindles: 2 | MAIN SPINDLE | - Max. bar diameter: 12 [mm] | - Z-axis travel: 140 [mm] | - Spindle speed: 8000 [rpm] | - Spindle drive power: 2.2 [kW] | - Number of tool positions: 13 | COUNTER SPINDLE | - Max. bar diameter: 10 [mm] | - Spindle speed: 8000 [rpm] | - Number of tool positions: 4 | FMB Minimag bar loading magazine | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
Operating hours: 44,000 | Technical data | - Number of axes: 5 | - Number of spindles: 2 | MAIN SPINDLE | - Max. bar diameter: 12 [mm] | - Z-axis travel: 140 [mm] | - Spindle speed: 8000 [rpm] | - Spindle drive power: 2.2 [kW] | - Number of tool positions: 13 | COUNTER SPINDLE | - Max. bar diameter: 10 [mm] | - Spindle speed: 8000 [rpm] | - Number of tool positions: 4 | FMB Minimag bar loading magazine | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
maximum number of results exceeded
please refine your search
5.500 € 
