s s used for sale

SML Heavy-duty tipping bucket 240cm with Manitou mounting, - Self-weight: approx. 443 kg, - Volume: 1.56 m3

Consisting of a TBA 19 200V 125 ml Slim filling machine with a Tetra Pak straw applicator TSA 21 Tetra Pak TrayPacker TCBP 70 Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

SML heavy-duty dump bucket 240cm with Merlo ZM2 mount, - Net weight: approx. 443 kg, - Volume: 1.56 m3

Key data: 63 KW, 73 kVA, 400 V

senergino Gas Generator (CHP) SBG 50EL 4.12 TI. E Gas electricity and heat generators from 2011 with unknown operating hours, closed unit with control. 63 KWel x 1,500 rpm, 400 V/50 Hz. Leroy Somer LSA 43.2L8 C674, 73 KVA Manufacturer: senergino Model: SBG 50EL 4.12 TI. E Type: Natural Gas Electricity and Heat Generator Serial Number: D2N002416 Power [KWel]: 63 Voltage [V]: 400 Current [A]: 105 Frequency [Hz]: 50 Year of Make: 2011 Operating hours: unknown Weight unit [kg]: 1,940 Dimensions LxWxH [m]: 2.95 x 1.00 x 2.20

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partially reconditioned (photos show the machine during reconditioning), installed power - used power in work: about 60-65% : 13 ...

circular angle saw for cutting logs Type: D9 Duplex+LH8 Manufacturer: StrojCad Year: 2018 Hours: 10000 mth Logs max: 800 mm Max log length: 8000 mm Saw blade width: 500 mm Max. lumber size: 180/180 mm, in the mode of wide boards 310/180 mm 2x discharge conveyors 1x loading conveyor 1x sorting tipping conveyor Automatic sorting of cuts Machine weight: 19500 kg Centralized lubrication system, dispenser, cabin Machine in good condition, fully functional, under power Find more here - / Contact us at -

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 8,190 mm Number of fields per row of shelves: 05 pcs. The scope of delivery includes: 06x Shelving rack stand, used Material color: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 30x Shelves, used Material color: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with equal. distributed load. 120x Shelf Racks, Used Suitable for smooth stands Material color: sendz. g ...

Offer 25488 Hydr . Metal - Mitre Band Saw Machine Technical data: - Saw blade dimensions 3320 x 27.0 x 0.9 mm - Infinitely variable cutting speeds N 15 to 100 m/min - hydr. Material vise - Mitre adjustable left up to 60°, right up to 45° - Cutting range at 90° around 280 mm - Square 260 mm - flat 330 x 260 mm - Cutting range at 45° li + re around 250 mm - 45° li flat 270 x 200 mm - 60° li flat 170 x 170 mm - Drive 400 V / 2.2 kW - Coolant device - Chip clearing brush - Weight approx. 1300 kg - Space requirement approx. W 1800 x H 1900 x D 1950 mm

Reebow auto stacking machine Automatic extraction and sorting machine (auto-stacking machine inclusive of control softwareV.10） Specification: 1. Strip off 5 loves/time (clamp type machine) 2. For nitrile glove production line with maximum speed of 160pcs/minute. 3. It can be used for 2.6~5.5g nitrile glove 4. Entitle to fulfill nitrile glove length 240±10mm if interested kindly contact; F31 Ms Aqilah (0176742799) Email: naqilah_m@topglove.com.my

-Thermal CTP Year 2010 -64 diodes -Plate Count: 196,000 plates done -Exposure Time: 25,500 hours -Internal plate punch system -Blower Unit External Screen BU 800 -Min Plate Size: 304 x 370mm; Max Plate Size: 1160 x 940mm. -Maximum Imaging Area: 1160 x 924mm. Plate Thickness: 0.15 - 0.30mm. -Resolution: 2400 dpi -Productivity: Up to 23 plates/ph at 2400 dpi -Conveyor to Plate processor Agfa Elantrix 125 SX for thermal plates -Plate stacker Elantrix ST 125 EX and trolley -Complete with RIP Agfa Apogee Prepress and Workflow, computers and monitors -Available immediately

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

CNC Shearing Machine manufactured in 2022. This Durma SBT 4006 features a cutting length of 4,100 mm and a cutting capacity of 6 mm thickness. It is equipped with a DURMA DT-7 CNC control system for precise operation. If you are looking to get high-quality shearing capabilities, consider the Durma SBT 4006 machine we have for sale. Contact us for further details.

Qty. 1 Second-hand Slab Surface Scalper Mfc.: TBA Built: 1972 Scalped Slab Dimensions: 1000-3000 x 740-2000 x 180-350 mm – L x W x T Main Drive Electric Motor Power: 250 kW, 380 V, 735 RPM Scalping depth at once: 4-5 mm Capacity: Average 7 tons/h (For 1040 mm width slab)

Siemens SGT-400 Gas Turbine Package – Year 2017 1. Offer Subject We are pleased to offer for sale a Siemens Energy SGT-400 gas turbine package, manufactured in 2017, in excellent operating condition and available immediately for power generation or industrial applications. 2. Technical Specifications Equipment Offered: Make/Model: Siemens SGT-400 Year of Manufacture: 2017 Type: Natural Gas Turbine Operating Hours: 42,000 hours Output Voltage: 11,000 Volts Frequency: 50 Hz Rated Power Output: Approximately 12 MW Condition: Used – Good operating condition Availability: Immediate This turbine package is suitable for reliable and efficient power generation, cogeneration, or industrial applications.

Code: 0367 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wooden packaging, furniture, window and door frames, sawmills, and various - CE Standard Blade diameter 500 mm Hole 30 Blade speed 2800 rpm Motor 7,5 Hp Cutting capacity mm 510 Cutting depth mm 145 Manual feed Infeed roller table mm 2000 Outfeed roller table mm 2000 Suction inlet diameter mm 150 Weight kg 350

Overview This SMI LSK 45 T shrink wrapping machine, manufactured in 2002, is designed for the packaging of beverage multipacks using shrink film. The machine was previously used for producing various sixpack configurations and is suitable for different bottle sizes, offering flexibility in multipack formats. With a capacity of up to 45 packs per minute, the machine is well suited for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical Data Manufacturer: SMI Model: LSK 45 T Machine type: Shrink wrapping machine (film packer) Year of manufacture: 2002 Capacity: approx. 45 packs per minute Packaging type: Shrink film (with film discharge) Application: Packaging of beverage multipacks Formats: 2x3 x 0.5 L 2x3 x 1.0 L 2x2 x 1.0 L 2 ...

Manufacturer: Speedprint Model: SP710 Condition : Good Find more here - / Contact us at -

Manufacturer: ASP Model: Sterrad 100NX Type of Machine : Hydrogen Peroxide Gas Plasma Sterilizer Year of Manufacture: 2007 / 2008 Unit 1 - Total cycles recorded: 8810 - Last planned maintenance: July 2025, Level 2 - UV lamp replaced at last service - Unit met full specification after service Unit 2 - Total cycles recorded: 9522 - Last planned maintenance: July 2025, Level 1 - UV lamp replaced at last service - Unit met full specification after service Find more here - / Contact us at -

Manufacturer: F. and M. Lautenschlaeger Model: Magnocert 12 STE (Type 12417) Year of manufacture: 2015 Includes vacuum pumps Unit 1 - Total cycles: 19160 - Last service: February 2026 - Test run passed, vacuum test 0.0 mbar/min Unit 2 - Total cycles: 20273 - Last service: January 2026 - Test run passed, vacuum test 0.0 mbar/min Unit 3 - Total cycles: 18402 - Last service: January 2026 - Test run passed Find more here - / Contact us at -

Cutting length: 5300mm; Cutting height: 2100mm; Cutting depth: 80mm; Scorer: no; Feed: manual; Display horizontal cut: Scala; Display Vertical Section: Scala; Saw blade diameter: 300mm; Evasive material pad: yes; Saw blade speed: approx. 4000 rpm; Motor power: 4 kW; Machine length: 6500mm; Machine depth: 1500mm; Machine height: 2800 mm; Weight: 800kg;

Cutting length: 3100mm; Workpiece clamping: pneumatic;

Carriage length: 3800 mm; Cutting width at the width stop: 1500 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 140 mm; Scorer: no; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Adjustment width stop: electric / position control; Display Saw Blade Angle: Digital; Display cutting height: -; Display Width Stop: Digital; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 3; Motor power: 7.5kW; Engine brake: Yes, automatic; Suction port: 80mm and 120mm; Machine length: 3900mm;

Carriage length: 3200 mm; Cutting width at the width stop: 1300 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 150 mm; Vorritzer: Yes; Height adjustment saw blade: electric / position control; Swivel adjustment saw blade: electric / position control; Adjustment width stop: electric / position control; Display Saw Blade Angle: Digital; Display Cutting Height: Digital; Display Width Stop: Digital; Display cutting ruler: Scala; Saw blade diameter: 450mm; Speeds: 3; Motor power: 7.5kW; Engine brake: Yes, automatic; Suction connection:

cutting length: 5300mm; cutting height: 2100mm; cutting depht: 80mm; scoring unit: no; feed: manuell; read out horicontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; movable material support: ja; Sawblade speed: ca. 4000 U/min; motor power: 4 kW; machine length: 6500mm; machine depth: 1500mm; machine height: 2800 mm; weight: 800kg;

cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes;

sawing length: 5300mm; sawing height: 2100mm; cutting depth: 60mm; scoring unit: no; feed: manuell; read out horizontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; evasive workpiece support: ja; speed sawblade: ca. 4000 U/min; motor power: 3 kW; machine length: 6500mm; machine width: 1500mm; machine height: 3000 mm; weight: 800kg;

Cutting length: 5300mm; Cutting height: 2100mm; Cutting depth: 80mm; Scorer: no; Feed: manual; Display horizontal cut: Scala; Display Vertical Section: Scala; Saw blade diameter: 300mm; Evasive material pad: yes; Saw blade speed: approx. 4000 rpm; Motor power: 4 kW; Machine length: 5500mm; Machine depth: 1500mm; Machine height: 2800 mm; Weight: 800kg;

roll diameter: 600 mm; cutting width: 580mm; table tilting: yes; belt speed: motor power: 2,2 kW; motor brake: yes / manual; suction connection: 100mm; machine length: 120mm; machine width: 800mm; machine hight: 2015mm; weight: 200kg;

Roll diameter: 600 mm; Column projection: 585 mm; Cutting depth: 370mm; Swivel table: yes 0 to + 20Â; Table size: 890 x 620 mm; Belt speed: 18 m/min; Motor power: 2.2kw/400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 1100 mm; Machine width: 670 mm; Machine height: 2050 mm; Weight: 295 kg;

Roll diameter: 400 mm; Stand projection: 390 mm; Cut depth: 280mm; Swivel table: yes 0 to + 20Â; Table size: 500mm x 450mm; Belt speed: 18 m/min; Motor power: 1.5 kW / 400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 780 mm; Machine width: 585 mm; Machine height: 1735 mm; Weight: 125 kg;

Roll diameter: 700 mm; Column projection: 670 mm; Cut depth: 430mm; Swivel table: yes 0 to + 20Â; Table size: 700 x 930 mm; Belt speed: 18 m/min; Motor power: 3kw/400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 1260 mm; Machine width: 750 mm; Machine height: 2230 mm; Weight: 420 kg;

Roll diameter: 800 mm; Stand projection: 785 mm; Cut depth: 500mm; Swivel table: yes 0 to + 20Â; Table size: 1130 x 800 mm; Belt speed: 18 m/min; Motor power: 4 kW / 400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 1590 mm; Machine width: 880 mm; Machine height: 23900 mm; Weight: 620 kg;

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manual; altitude display: digital; swivel angel display: digital; tilting fence display: Scala; spindle diameter: 30 mm; speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000; power consuption: 7,5 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 2400mm; maschine width: 1400mm; weight: 1100kg;

Working width: 530 mm; Planing shaft: tersa; Number of knives: 4; dressing table length: 2900 mm; Adjustment dressing table: lever; Hollow pointed joint adjustment: no; Advertisement for Spahn acceptance: Scala; Display hollow pointed joint: -; Dressing stop angle adjustable: yes; Motor power: 5.5 kW; Machine length: 2900 mm; Machine width: 1000mm; Weight: 810 kg; made in Italy

working width: 530 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2900 mm; adjustment table: Hebel; read out out table height: Scala; surface fence tiltable: ja; motor power: 4 kW; machine length: 2900 mm; machine width: 1000mm; weight: 800 kg;

working width: 500 mm; cutter head: strip knive; number of blades: 4; surface table length: 2700 mm; adjustment surface table: Hebel; read out: table height; fence tilting: yes; motorpower: 4 kW; motorbrake: yes, automatic; machine length: 2800 mm; machine width: 1000mm; weight: 1050 kg;

Boiler capacity: 270l; Maximum volume flow: 0.92m³/h; Motor power: 5.5kW; Refrigeration dryer: Yes; TD 270 ADV3: C100, HD6505.5 kW, 400V/50HzPressure: 10 barLanguage: GermanPainted on compressed air tank 270 l AD2000With refrigerant dryerHS code: 84148075

AUTOMATIC MULTI RIP SAW model SCM M3 second hand machine carpet with integral cast iron elements in excellent condition. general condition of the machine: excellent Technical details : max.height of cut mm.120 max.working width mm.300 minimum length of cut mm.250 max.diameter of blades mm.350 min.diameter of blades mm.200 main motor power Hp 35 feed motor power Hp 1,5 arbor speed rpm 4200 variable carpet advancement speed. from 6 to 45 m/min. net weight kgs.2200 volt. 380/50

Key data: 410 mm

SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50

SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000 AND OTHER MACHINES

Width 82 cm Year of construction: 2011 2nd station: 6 fold pockets 82 cm H version with round plug Delivery date: immediately

English Translation A Berg & Schmit band saw in double-miter design including 20 new saw bands is available. Miter range: 60°-45°, cutting speed: 80m/min, cutting capacity round: 230mm, cutting capacity square: 230mm/230mm, cutting capacity rectangular: 280mm/150mm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1500mm, weight: approx. 350kg. The machine has a hydraulic oil leak. An on-site inspection is possible.

A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.

Cabbage shredders S65 Cabbage cutting machine 2020, Stainless, cabbage shredding machine, with two top mounted de-stalkers, 5000kgs - 7500kgs per hour, disk diameter 650mm can be used for whole large cabbage heads, mobile, 3Ph

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

General SKU103Y799 MakeBaker Perkins, Stoke on Trent TypeMPC/V30 Mach.No.65034 Year of construction19856 Sizes Screw diameter30 mm Main Features Motor3 KW Inlet diameter30 mm L/D14 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30mm, Screw length 420mm L/D14 Co-rotatingcheck Number of heating zones:3 (6x 200 Watt per zone) + die heater Electric heatingcheck Water coolingcheck DC-motor3,0 KW, 180 Volt With variable speed drivecheck Feeding with metering screwdia. 32mm Used ontoner Information LocationBarneveld Floorspace2,0 x 0,9 m Total height2,0 m Weight820 kg Technical specs Extra informationMoC: screw housing The material 1.0762 or 44SMn28 is an unalloyed quenched and tempered steel.Double screw extrudersBaker PerkinsExtruders > Double screw extrudersBrand > Baker Perkins What you can expect from Foeth: -- Machine is  ...

Vitap Sigma 2TAS Through Drill 4 vertical drilling units of two heads each 2 side spur spindles Spindle spacing 32mm Length of the processed material max 2500mm min 240mm Drilling depth up to 70mm Pneumatic Material Clamps Year of manufacture 2006 CE mark Machine Weight 1600kg Net price

A complete industrial sawmill production line( Year of Manufacture : 2000) is available for sale , it includes the following elements: 1 - Log Yard Manufacturer: Hobest AG / EWD / Microtec / Herzog Forsttechnik Includes: • 3x Feed conveyor type NQF Hobest • 3x Step conveyor type HSF Hobest • 2x Block conveyor type BZ 500 Hobest • Chain swing saw with log holder type DSH/EWD-Stihl • Block conveyor with rotating device type BZ 500/S Hobest • Metal detector with conveyor type MSG/120 EWD • Tapered roller track type RGK Hobest • Root end reducer type Hobest Primus • Debarker type ER 90 EWD • Tipping trough type RKW/500 Hobest • Cross conveyor type NQF Hobest • Block conveyor type BZ 500-1E Hobest • Log measurement system type Kemes Keba • Sorting block train type BE 500/SA Hobest • Central hydraulic unit Hobest • Electrical control system  ...

Electronic Scale, Fabr.Soehnle, Model 9055