sütron electronic used for sale

Sybermat Denester for "Hypacks" of 100 Syringes - Tubs of nested syringes arriving for example from a filling line, are denested by a robotic arm with suction cups into denesting combs. The syringes are then dispensed from the combs into the inspection machines or any other machine. Suitable for pre-filled syringes 10.85 mm diameter, max. 105mm long, output up to 20.000/hour. Year 12/2002.

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

MECHANIC SYSTEM GM6VW industrial air filtration system was built in 2014 in Poland by Mechanic System Sp. z o.o. The machine is used in air filtration from dry impurities generated during various technological processes. Thanks to the use of patron filters with a large filtration area, the machine achieves an efficiency of up to 99.999% in class M, enabling recirculation of cleaned air back to the production hall. Dust accumulated on the surface of the patron filters is cleaned automatically by pulses of compressed air during machine operation. Moreover, the vertical positioning of the filters increases their vitality and significantly reduces operating costs. The MECHANIC SYSTEM GM 6VW dust collector has a fan installed directly on the filter chamber and is offered together with a controller and existing piping. Technical specifications of the MECHANIC SYSTEM GM6VW dust extraction un ...

SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 μm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample Types: Supports SBS standard plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes, and microscope slides Throughput: Can expose up to 250 plates per day Automation: Fully automated with options for integration into robot systems Voltage (U): 100 – 240 V AC 50/60 Hz Power (P): 295 VA max Created: 01/2011 More items - new and used - can be found in our shop! International shipping costs on request!

2019 WK Systemtechnik ILS 600 – HTL – Ionline Lubrication System Dickschickt preservation system. The oil is applied via nozzles The spray system is a minimum quantity spray system for high-precision dosing of preservative oil. With the spray system you can be coated or oiled reproducibly. By spraying using two-substance nozzles, the finest layer thicknesses can be applied without contact and a wide viscosity range can be covered. The forming medium is in a closed circuit; the excess pressure created by the spray air in the chamber is sucked off at the inlet and outlet using a vacuum lock, so there is no environmental pollution. General data Dimensions (WxHxD) without conveyor units 2486mmx2080mmx2722mm Dimensions with open doors 3265mmx3510mmx2722mm Weight approx. 2500 KG Electrical connection Supply voltage 400 Volt / 50 Hz Power 15kVA Fuse protection 35 A Control v ...

Plant for the production of caustic soda PROMINENT SYSTEMS Tank and dosing system for cleaning systems in the food sector, such as bottling plants - Storage tank DVS 2205 made of PE-100 - Fall arrester - Dosing system - Container diameter: 1,640 mm - Container height: 2,000 mm - Net volume: 4 m³ - Everything regularly maintained and TÜV tested - Condition: Mint Viewing by arrangement

Machine type TIG inverter welding system gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 4 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Original price 1.550,00 € + VAT Price kpl. from ...

Ref.-No. 00736 Name of the system extraction system + classifier Manufacturer sybrandy Model PF 4 L Spez Year of construction 07 - 2014 Kw 3KW Capacity 3.400m3/h Cartridge SYB325-1200 Operating hours 22 h

Manufacturer: Sonic Air Systems Year: 2007 Type: Sonic 70 Power: 5.5 kW Dimensions: - Total height: 2300 mm - Width: 1000 mm - Length: 1000 mm - Bottle inlet height: 1530 mm The machine has been renovated and is ready for installation.

Year of construction 2014

Loader-unloader system Was still in use until about 2 years ago and fully functional until the end. Type ISU210S and ISL175S Find more here - / Contact us at -

Turbo Systems LTD mobile dosing machine, type: UPG110512, machine number: D150P5709666, year of construction: 2011, tub dimensions: Ø 570 mm x 430 mm, total dimensions: 1200 mm x 940 mm x 1725 mm.

Key data: 6 Meter

Machine Type: Plasma Inverter Cutting Machine Make EP-Systems Type M 40.60 Connection voltage: 1 x 230 volts, setting range: 15 – 40 amps, duty cycle: 60 % ED at 40 amps 100% ED at 30 amps Current adjustment infinitely variable max. quality cut 2 mm max. cut-off cut 5 mm Cooling inverter through built-in fan Cooling burners by compressed air Portable assembly system design Fuse 16 amps Dimensions L x W x H 470 x 250 x 250 mm Weight 10 kg Age 5 years Condition workshop-tested new incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece plasma torch PH-70, 6 mtr. long 1 piece ground cable 1 piece compressed air hose 1 Piece Instruction Manual Warranty 12 months from the date of delivery Original price €1,750.00 + VAT Price kpl. with the above accessories €159.00 + VAT _____________________________ ...

1. Process Engineering Equipment - VA VA-02. Glycol Regeneration System (C 612) 2 double-tank systems, type DPC160-27/5.0/35k/A, built in 1991 Fully functional, cleaned, skid-mounted system - complete unit Manufacturer: Klöpper Therm Dortmund Unterste Wilms Str. 21 44143 Dortmund Tanks: Dillinger Steel Construction Technical Data: Each system consists of 2 tanks – sheet steel construction, diameter approx. 0.88m; length approx. 5.60m; weight per tank approx. 2.80 t; volume per system approx. 4700 l; Motors: SCHORCH KE 9132 M BA014-7; 6.8 kW; 380/660 V; 13.6A; 14400/min; SCHORCH KE3160C-HB012-Z; 5.5/7.5 kW; built in 1991; 380 V; 13.4/14.4 A; 720/14400/min; Find more here - / Contact us at -

Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system with its small dimensions of 188 x 80 x 98 mm can be easily installed in or on production plants. The print head reaches top speeds of more than 180 m/min and has IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is via an i-Logic button. In addition, maintenance statuses can be shown on the display. The Integra One is particularly compact with dimensions of 188 x 80 x 98 mm and was specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard Cartridge Monitoring identifies the current ink type and autom ...

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately

1 of used dryig system, consisting of main assembly (hood with Tetra conveyor frame) with hood, Sonic Air Systems blower with Leroy Somer motor type 256TC / 3x 400 V / 50 Hz, 20 HP / 27.6 Amp. (with Danfoss VLT 5000 VFD in separate panel), and 3x Sonic Air Systems airknives each 3" body diameter and 610 mm slot length With manifold from 1 to 3 hoses. Hoses not available. Control panel not available (was switched from combined line conveyor control panel).

Pallet handling system manufactured in 1992. This FL SYSTEME F05.10 FLG features 42 rows with 4 levels, each accommodating 2 pallet spaces. The frame height is approximately 7m, with a total length of about 90m. The crane is essentially included free of charge, and the price includes dismantling. If you are looking to get high-quality pallet handling capabilities, consider the FL SYSTEME F05.10 FLG machine we have for sale. Contact us for further details.

A complete cut-off grinding system is available. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking device. 4) Bar rotating drive and measuring station. 5) Weighing station with section sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic power unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible.

Complete low caloric gasifier with CHP (New technology!) Input; 800-1500kg/h - Chicken manure, ricehusk, reed, hay. roadside grass. Output; 750kWe, 1400kWt en 300-500kg/h biochar. +280kg/h amporpheus SiO2 Output; 300-400m3 Syngas Scope of supply; -Complete Guascor CHP System & syn gas engine -Gas analyse lab -SynvaTor Reactor -Elevator -Redler -Ash disposal screws -Syngas filters -Syngas cleaners -Heat exchangers -Rotary valves -Screws -Oxiburner -Control cabinets -Operator room -Gasbuffers -Heat buffers -All fans -All compensators The site is currently open for visits and inspection!

Used Used Microfiltration System Cadalpe 2012: Year: 2012 Condition: Good Used Microfiltration System Cadalpe: Model: C41-24 SA Year: 2012 Speed: From 7200 a 19.200 litres/hour 24 Filter modules with polymer membranes a hollow fiber, each with a surface area of 10 m? Code: P 22 More details: https://bottlingscout.com

Chiller Make: SYSTEMAIR Type: SYSCROLL 170 AIR EVO PH Power: 170 kW – cooling and heating Electrical. Power: 77 kW/150A Refrigerant: R410A Weight: 1,385 kg Year of Make: 2014 4 pcs compressor Make: Copeland Scroll Type: ZP182KCE-TFD-455 Volume: 35.1 m³/h Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible.

Aircooled chiller Systemair SYSCREW 440 AIR EVO HSE CO 443 kW Cooling capacity: 443 kW / 125.97 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH7593-90Y-40P (screw) + 1 pcs. Bitzer CSVH24-125Y-40A (screw, inverter) Type of refrigerant: R513a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.7x2.25x2.5 m. Weight: 4759 kg. Working hours: 3/3 h. Condition: New

Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good

Aircooled chiller SYSTEMAIR SYSCROLL 420 AIR CO E COAT 414.2 KW Cooling capacity: 414.2 kW / 117.78 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. Bitzer GSD80485VAB4-2 (scroll) Type of refrigerant: R410а Number of fans: 8 pcs. Dimensions: 4.55x2.15x2.5 m. Weight: 2441 kg. Working hours: 5588/5528/7735/2825 h. Condition: Good

Used Used Bottle inspector FT SYSTEM CL 600 ? HF: Year: 2006 Condition: Good Used Bottle inspector FT SYSTEM CL 600 ? HF: Model: CL 600 ? HF Year: 2006 Speed: 25,000 BPH with 0.5 l bottles Direction: from left to right Type of inspection: x-ray Type of control: full bottles ? filling level; ? presence of cap Possibility of connecting by encoder to filler and capper to identify the filling valve or the malfunctioning capping head Code: ZZ 46 More details: https://bottlingscout.com

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed build material less than 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400, ...

On behalf of a customer, we are selling a 3D Systems MultiJetPrinter type ProJet 2500Plus in very good condition. The machine was used as a dealer demo machine., The machine has been equipped with new drive belts and new filters. All materials have been removed according to the manufacturers instructions. The machine is empty. The printing time is approx. 1400 hours, 181,000 layers were printed with approx. 24KG of building material and approx. 33KG of support material., Equipment:, - 3D Sprint Basic Complimentary Software (on-line activation), Installation: 2016, Print modes: HD - High Definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on printing parameters, ...

Power supply unit, converter, power supply, switching power supply -Synaccess: NP-05B -Sockets: 5 -Connection: 110/220 V 15/10 A -Price: per piece -Number: 2 pieces -Dimensions: 480/45/H60 mm -Weight: 1.1 kg

2015 Laem System VIS100-800 1. General Characteristics The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. 2. Web materials to be handled - The doctoring machine can unwind, process and rewind APET/PE materials The thickness range to be considered is 50 � ...

table length: 1000 mm table width: 1000 mm table height: 100 mm bore: 16 mm weight: 200 kg Special offer: Exhibition use – slight scratches on the surface Features: - Surface holes in a 50x50 mm grid - Holes in the side panels in a diagonal grid - 4 feet – standard configuration 750 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 – 13 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 16 mm - Corners, edges and holes rounded - Side panel height 100 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm Special item: Hardness not achieved and a blemish on the surface Specifications: - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Surface hole pattern 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Hole spacing on side panel 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise setups - 6 feet - Standard configuration 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Machine type: Test mandrel Manafacture: System 3R Type: 3R-606 Year of construction: unbek. Condition: Used Offer will only be sent if a complete imprint is provided! Price 800 Euro incl. 19 % VAT and shipping within Germany Location Warstein , Germany Reference M-HIR-0623-1 DESCRIPTION We offer you to buy a used mandrel from the manufacturer System 3R, as shown in the pictures. Availability: Immediately Our offer is aimed at traders who are registered within the meaning of the trade regulations according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are excepted!

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.

General SKU203W028 LocationBarneveld MakePowder System TypePSL Mach.No.C74522 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel/Coated Surface0.3 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface0,3 m² Capacity130 l. Vessel sizesDia. 800x800 mm Plate sizes800 mm Top connectionscheck With jacketVolume 10 l. Max. temperature-25°C/+150°C With pumpGrundfos DMH 213-10 B-SS-L/T/SS-X-41A1A1X Capacity213 l/hr Motor230/400 V (Ex) MaterialPFA coating Information Year of construction2014 Mounted on wheelscheck Total height2,00 m CEcheck Floorspace1,15x1,05 m Weight1000 kg Extra SpecificationsWith agitator manually operatedNutsche filtersPowder Systems PSLFilters > Nutsche filtersBrand > Powder Systems PSL What you can expect from Foeth: ...

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm Special item: The holes in the bottom row of the side panel do not fit or fit only partially. This affects approx. 45 holes. Signs of wear in the plasma nitriding Features: - Holes in the surface in a diagonal pattern - Holes in the side panel in a diagonal pattern - 6 feet – standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Corners, edges and holes rounded - Side panel height 200 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used aseptic line for tretra pack fino 1 L - 3600 PPHTechnical Specifications & Performance DataThis complete Tetra Fino Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling.Production speed: up to 3,600 packages/hourContainer type: Carton-based aseptic packages (Tetra Fino Aseptic family)Supported volumes: 1.0LPrimary product currently run: MilkMain filler year: 2006Additional module: SOCO System unit, year 2014Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyorAdvanced Automation & Control SystemsThe line incorporates an industrial control  ...

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

We have about 50 rolls of Sylomer fleece rolls in stock Role Dimensions: Width: 1.90 m Length: 34.00 m Thickness: 10 mm These nonwoven rollers are suitable for e.g. : - track construction - the interception of vibrations - for footfall sound insulation - for a wide range of use in the construction sector - and much more Price on a negotiation basis!

3D-SYSTEMS ProJet 660 Pro 3D Printer Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. This means that even large models can be produced without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one printing process. 3D color printers with tremendous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and detailed printouts, these 3D printers do not require dedicated support structures. The non-solidified powder supports the components during printing and is then recycled semi-automatically. Applications Communication of form and design, installation analyses, first fun ...

Description Microjet height-adjustable, frequency-controlled suction belt table for addressing Length approx. 1600m inlet width approx. 85.cm

Matthews Matthews Marking Systems Marking Printer or Marking Printer Type144907.01 Lite Controller MPERIA Control Supplied with ink and thinner The device was used to print bags in a mill CE compliant Very good condition

SYNTEGON CARTRIDGE FILLING LINE Year of construction: 2023 Complete line, never installed. Composed of Washing Machine Type RRU 2053 C Before the cartridges can be safely filled and closed, they need to undergo a thorough external cleaning to remove product residues and other contaminants, preventing harmful substances from compromising operator and patient safety. The designed solutions allow to externally clean a wide variety of containers, with special emphasis on fast and easy operations. PRODUCTION CHARACTERISTICS Range containers: max. 10 ml Output/h: up to 21,600 Hot Air Laminar Flow Tunnel Type HQL 3320 This tunnel, highly flexible and cost-effective thanks to their modular set-up and high level of automation, uses dry heat to sterilize a wide range of containers safely and reliably, including pre-cleaned ampoules, cartridges, and syringes using ...

Properties: Condition: fully functional, with traces of use Ideal for fast material transport Expertly dismantled and packed Manufacturer: Soco System Condition: Used Model/Type: Roles Drive type: Gravity System consisting of: 7 segments (5 x 1,980 mm, 2 x 960 mm) Total length: approx. 11,820 mm Total width: approx. 470 mm Conveying width/roll width: approx. 410 mm Segment length: approx. 1,980 mm Roll diameter: approx. 50 mm/plastic rolls Axle distance: approx. 90 mm (adjustable) Material: Steel/plastic Information about the frame: Height: approx. 100 mm Width: approx. 25 mm Stock: 11.82 meters Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined co ...