rösen robbert used for sale

A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.

A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible.

Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.

A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

Planscheibein little used condition Manufacturer TG Diameter approx.610mm Body bearing traces (can be easily removed!) Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Planscheibein little used condition Manufacturer TG Diameter approx.500mm Body bearing traces (can be easily removed!) Through hole, approx. 90 mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

This 3-axis Röders TEC RHP 500 was manufactured in 2006. It features a high spindle speed of 42,000 rpm and a tool magazine capacity of 42 slots. The machine is equipped with hydrostatic X, Y & Z axes and includes a coordinate grinding package. If you are looking to get high-quality machining capabilities, consider the Röders TEC RHP 500 vertical machining centre we have for sale. Contact us for further details.

A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible.

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: Röhm / unknown, revolving center points 2 pieces -Type: Röhm 102N MK2 / without type designation -Intake: MK2 -Price/delivery: complete -Transport dimension: 160/100/H50 mm -Weight total: 2 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Röhm / unknown, revolving center points 5 pieces -Type: Röhm 108H MK4 / 108HVL MK4 / 3x without type designation -Recording: MK4 -Price/Delivery: complete -Transport dimensions: 290/230/H80 mm -Weight: 9.6 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Röhm / unknown, rotating centering points 3 pieces -Type: Röhm 110HVL MK5 / 2x without type designation -Recording: MK5 -Price/Delivery: complete -Transport dimensions: 280/270/H95 mm -Total weight: 14.3 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, rotating centering points 3 pieces -Type: Röhm 114H MK6 / 2x without type designation -Recording: MK6 -Price/Delivery: complete -Transport dimensions: 390/360/H120 mm -Total weight: 33.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, revolving centering points 4 pieces -Type: Röhm 158 MK4 / Bokö Perfekt 4P / 2x without type designation -Recording: MK4 -Price/Delivery: complete -Transport dimensions: 230/210/H70 mm -Total weight: 8.2 kg

RÖHM NC Doppelspanner RKD-M 125 NC Double Vise Manufacturer RÖHM Model NC Doppelspanner RKD-M 125 Condition untested Location 63843 Niedernberg DE Lot 77

RÖHM NC Doppelspanner RKD-M 125 NC Double Vise Manufacturer RÖHM Model NC Doppelspanner RKD-M 125 Condition untested Location 63843 Niedernberg DE Lot 80

RÖHM NC Doppelspanner RKD-M 125 NC Double Vise Manufacturer RÖHM Model NC Doppelspanner RKD-M 125 Condition untested Location 63843 Niedernberg DE Lot 94

RÖHM NC Doppelspanner RKD-M 125 NC Double Vise Manufacturer RÖHM Model NC Doppelspanner RKD-M 125 Condition untested Location 63843 Niedernberg DE Lot 93

RÖHM NC Doppelspanner RKD-M 125 NC Double Vise Manufacturer RÖHM Model NC Doppelspanner RKD-M 125 Condition untested Location 63843 Niedernberg DE Lot 81

RÖHM NC Doppelspanner RKD-M 125 NC Double Vise Manufacturer RÖHM Model NC Doppelspanner RKD-M 125 Condition untested Location 63843 Niedernberg DE Lot 76

RÖHM NC Doppelspanner RKD-M 125 NC Double Vise Manufacturer RÖHM Model NC Doppelspanner RKD-M 125 Condition untested Location 63843 Niedernberg DE Lot 79

RÖHM NC Doppelspanner RKD-M 125 NC Double Vise Manufacturer RÖHM Model NC Doppelspanner RKD-M 125 Condition untested Location 63843 Niedernberg DE Lot 78

Double chamber vacuum packaging machine Röschermatic VM-42/2/C, MC control, all stainless steel, high performance vacuum pump, electronic control, inlet plates for height adjustment. You are very welcome to test the machine in our facility in Koblenz, Germany.

Memory rotary table, used rotary storage table Manufacturer: RÖSLER Oberflächentechnik GmbH Type: R 1540 ST Table diameter approx. 1500 mm Built: 2003 Total dimensions: approx. 2600 x 2100 x 1000 mm Memory rotary tables are used for storing, buffering, separation and single feeding of rotational symmetrical parts. They are often enrolled in sliding grinding systems. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Prism jaw, 125mm wide for clamping round parts, type 1, D4-20mm, and 2x D6-40mm, Type 2, D4-20mm and D9-62mm

Rösen & Robbert Bread Slicer Type: Spa Bayern analog control Cutting width adjustable from: 3 – 15mm for cutting round and elongated breads with lubrication system can be driven on castors External dimensions width 104cm depth: 75cm height:107cm

5x RÖHM machine vices For sale are a total of 5 high-quality machine vices of the RÖHM brand from professional industrial use. Ideal for CNC milling machines, machining centers and toolmaking. Scope of Delivery • 5x RÖHM RB4 incl. Crank Preferably sold completely as a set. ⸻ Technical data – RÖHM RB4 • Jaw width: 160 mm • Max. wingspan: approx. 310 mm • Clamping system: mechanical-hydraulic • High clamping force due to force amplification • Quick adjustment via stake-out bolts • Hardened and ground guides • Weight: approx. 57–60 kg per piece • Application: Milling machines / CNC machining Condition • Used • Optical signs of wear (paint chips, see photos) • Technically flawless and fully functional • Robust industrial quality from RÖHM

Copy lathe Brand: Röhrsdorfer model: 83 199 Year of construction: 1987 Workpiece length 100 - 460 mm Kantel dimensions: 20 x 60 mm Equipment: Workpiece magazine Turning knives Template-controlled rotary blade knife, 3x

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg

live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.

Stock Number: 3805 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 983 004 N Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 Kg

Stock Number: 3806 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 151953 0004 P, Year of manufacture: 0 Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Röhm, three-jaw chuck with clamping plate -Mouth size: Ø 250 mm -Passage: Ø 76 mm -Mounting plate: 500 x 310 mm -Overall dimensions: 500/310/H300 mm -Weight: 72 kg

Precision four-jaw chuck, chuck, face plate, 4-jaw chuck -Manufacturer: Rohm, precision four-jaw chuck O 260 mm -Throughout: Ø 70 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Beeks: individually and completely adjustable -Weight: 39 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg

Drill chuck, keyed drill chuck -Manufacturer: Röhm, drill chuck Gear ring drill chuck MK2 -Type: S 1.5-13 1/16-1/2 J2 S2 -Clamping range: 1.5-13 mm 1/16-1/2 -Dimension: Ø 44 x 150 mm -Weight: 0.5 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm -Hole circle: Ø 220 mm -Weight: 18 kg

Inv. Num. : 7256 Type: RFM 600/2 Producer: Röders TEC Created: 2000 Parameters: Work table length: 700 mm Work table width: 550 mm X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck holder MK4 -Chuck size: Ø 100 mm -Passage: Ø 20 mm -Dimensions: Ø 100 x 200 mm -Weight: 3.8 kg

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer:Röhm, two-jaw tapping chuck MK3 -Type: MK3 B24 -Tool holder: square up to 24 mm see photos -Dimensions: Ø 85 x 245 mm -Weight: 4.4 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 250 mm -Bolt circle: Ø 225 mm -Passage: Ø 76 mm -Dimensions: Ø 250 x 110 mm -Weight: 25 kg

Block cylinder RÖHMHELD 1546 - 100 ( 1546-100 ) 901 Dimensions: 120 x 75 x 135 mm

Pull cylinder, hydraulic cylinder, single acting, with spring retraction RÖHMHELD, HILMA 1578-105 810R tractive force: 151,000 8 kN (at 500 bar) piston diameter: Ø 80 mm rod diameter Ø 50 mm stroke: 12 mm pmax: 500 bar New ! Dimensions: 160 x 120 x 165 mm

One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible.

Machine vise with quick adjustment and force reinforcement RÖHM 160 mm jaw width: 160 mm jaw height: 54 mm span: 0...110 / 210 / 310 mm span in 3 steps ! used, tested ! Dimensions: 550 x 250 x 135 mm

Hydraulic Full Clamping Cylinder RÖHM OVS 105 452-25 ( OVS105452-25 ) max 40 bar max 8000 rpm Piston stroke 32 mm Piston diameter: Ø 105 mm Piston rod diameter: Ø 25 / 35 mm New !' Dimensions: 340 x 310 x 150 mm

Hydraulic Full Clamping Cylinder RÖHM OVS 85 ( OVS85 ) p: 75 bar n: 8000 rpm piston stroke: 32 mm piston rod diameter: Ø 30 mm New ! Dimensions: 340 x 210 x 120 mm