133,942 used machines on RESALE, but how to find them? Machine Search
B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
Inv. Num. : 9027 Type: SE 520 - 1000 Producer: TRENS Created: 2017 Parameters: Control system: SIEMENS Sinumerik 840D Max. turning length: 1000 mm Maximum turning diameter: 520 mm Equipment: 3x bezel 15x quick-release bracket
turning diameter: 500 mm turning length: 1000 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Komptech Crambo 5200 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 5200 # 447202 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 5200 # 447211 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 5200 # 447248 Facilities Crambo 5200 D directT4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 5200 # 447221 Facilities Crambo 5200 D direct T4f/ StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Radial fan, conveying blower, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, press conveyor, pneumatic conveyor with injector, grain conveyor -Pressure blower: Pneumatic conveyor with filling hopper -Type: Ø 520 mm -Engine power: 4.0 kW / 2920 rpm -Volume flow rate: m³/min -Inlet: Ø 215 mm -Fan wheel: Ø 520 x 45 mm -Fusing funnel: Ø 415 mm -Dimensions: 1790/650/H880 mm -Weight: 119 kg
Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, exhaust fan -Manufacturer: Nedermann, radial fan pressure blower -Type: 520929 Ø 420 mm -Motor power: 1.5 kW / 2800 rpm -Volume flow rate: m³/min -Inlet connection: Ø 155 mm -Outlet connection: Ø 155 mm -Fan wheel: Ø 420 x 30 mm -Dimensions: 630/4300/H680 mm -Weight: 24 kg
Laminator Bagel Digifav 520 B2 automatic laminating machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Laminator Bagel Digifav 520 B2 automatic laminating machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Laminator Bagel Digifav 520 B2 automatic laminating machine Price: 16000 EUR Download PDF Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520 ...
- Optional chuck 1200 mm - 2 Axis RSF Digital read out - Conical turning attachment - Spindle bore 130 mm - Central lubrication
Discover the power of EST TICINO and its impressive ET-BM-CT 520 model. A used ET-BM-CT 520 is a prime example of the sturdiness and reliability of the brand. Boasting substantial swing over the bed (1040mm), cross slide (710mm), and insurmountable swing in the gap (1580mm), its prowess extends beyond the average. With an impressive 40 kW spindle power and 160mm spindle bore, your performance expectations will be commendably met. Its 3-guideway construction and double V Prima guideways add to the robustness of this model. The added features of a steady 600mm and 7800mm rest, a 4-chuck 800mm, and an Oil Country 160 spindle bore significantly enhance its operational capability. Additionally, the ET-BM-CT 520 offers an optional larger chuck up to 1500mm. These sought-after attributes present versatile applications, thus being ideal for heavy-duty metalworking, tool manufacturing and compone ...
used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.
Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details.
Key data: 520 mm, 250 mm, 5 kW
TECHNICAL DATA: Working width: 520 mm Working height: max. 250 mm 04 Knives Electric height adjustment 2-speed feed Installed power: 5.15 kW
SCM surface planer offered. Working width: 520mm, cutter block diameter: 120mm, knife dimensions X/Y/Z: 520mm/35mm/3mm, max. speed: 5000rpm, max. depth of cut: 8mm, total jointer table length: 2750mm, infeed table length: approx. 1550mm, dust extraction port diameter: 120mm, machine dimensions X/Y/Z: approx. 2750mm/1415mm/1200mm, weight: 875kg. Inspection by appointment possible.
KRAUSS MAFFEI 150 T type 150-520 C2 Force de fermeture : 150 T Année : 2003 31000 heures de fonctionnement Diamètre vis : 40 mm + 1 ensemble vis fourreau 50 mm Volume injectable : 217 cm3 / 340 cm3 Pression d’injection : 2377 bars Distance entre colonnes : 500 x 560 mm Dimensions des plateaux : 780 x 840 mm Epaisseur mini moule : 300 mm Course d'ouverture : 600 mm Interface euromap Noyaux hydrauliques Poids : 6 400 kg
table length: 630 mm table width: 630 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1400 mm turning diameter over slide rest: 1400 mm turning length: 5000 mm workpiece weight: 25 t turning speeds: 0,6-300 U/min : 4-jaw-chuck diameter: 800 mm control: Siemens transmission ratio: 3 total power requirement: 100 kW weight of the machine ca.: 70 t dimensions of the machine ca.: m Renishaw Probe Depth of profile with 80mm tool 355mm @ 1400mm dia. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment ...
turning diameter: . mm turning length: . mm control: . type: . CCUO turning diameter over slide rest: . mm cross movement: . mm spindle passage: . mm turning speeds: . U/min transmission ratio: . quill stroke: . mm rapid traverse: . m/min main drive motor: . kW 3-jaw-chuck diameter: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. ...
Manufacturer: Jung Year of Manufacture: 1981 Model: JF 520 (JF520 series) Type of Machine: Flat and profile grinding machine Condition: Fully functional Technical Specifications - Phases: 3 - Frequency: 50 Hz - Rated Current: 30 A - Supply Fuses: 35 A - Control Voltage: 220 V Find more here - .ucymachines/ Contact us at - sales@ucymachines
planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution - ...
Qty. 1 Second-hand extrusion press Mfc.: TBA Force: 85 MN Type: Loading Single action short stroke Built: 2026 – Never used! Billet dia.: 520 mm x 900 - 1800 mm L Ready for painting according to buyer’s requirement. Ready for shipment! All missing parts of the complete line can be also quoted, if requested. SCOPE OF SUPPLY 85 MN short stroke single action direct extrusion press Hydraulic type loader Billet-transfer loader Scrap-transfer device Billet lubrication device Extrusion tool Scrap Knocker Die shuffle Die Pusher Hydraulic System Electric System Spare parts
General SKU261Y309 MakeFryma Koruma Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume5200 Ltr. Motor48.5 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity5200 l. (5345 l.) Conical bottomcheck Manholeø 500 mm Top connectionscheck OutletDisho S230 With jacket145/32 l. Max. temperature151 °C, jacket 180 °C With propellor stirrercheck Motor30 kW, ± 18,5 kW, 400 V 1470 rpm Speed mixing shaft31 rpm MaterialStainless steel 1.4404 (316L) With jacketcheck General Serial5882 TypeDisho S230/5200 Year of construction1999 Mounted on legsOn frame With switchgear(as is) Floor space6 x 4 m Extra SpecificationsHermann Waldner tank, volume 5345 L: pressure −1 / +2.5 bar: allowable temperature 151 °C: jacket volume 145 / 32 L: jacket pressure 3 / 6 bar: al ...
General SKU261Y310 MakeFryma Koruma Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume5200 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity5200 l. (5345 l.) Conical bottomcheck Manholeø 500 mm OutletV230 With jacketDouble jacket 145/32 l. Max. temperature151 °C, jacket 180 °C With propellor stirrercheck Motor30 kW 400 V 1470 rpm Speed mixing shaft21 rpm MaterialStainless steel 1.4404 (316L) With jacketcheck General Serial5378 TypeV230/5200 Year of construction1995 With switchgearcheck Floor space9,0 x 4,0 m Extra SpecificationsTank volume 5345 L: pressure −1 / +2.5 bar: allowable temperature 151 °C: jacket volume 145 / 32 L: jacket pressure 3 / 6 bar: allowable temperature 180 °C: material 1.4404.Wit ...
General SKU261Y311 MakeFryma Koruma Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume5200 Ltr. Motor48.5 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity5345 l., (5200 l.) Conical bottomcheck Manholedia. 500mm Top connectionscheck OutletV230 With jacketvolume 210 l. Max. temperature130 °C, jacket 180 °C With propellor stirrercheck Motor30 kW, ± 18,5 kW 400 V. 1480 rpm Speed mixing shaft27 rpm MaterialStainless steel 1.4404 (316L) With jacketcheck General Serial5358 TypeV230/5200 Year of construction1995 With switchgear(as is) Floor space8,0 x 4,0 m Extra SpecificationsTank volume 5345 L: pressure −1 / +2.5 bar: allowable temperature 130 °C: jacket volume 210 L: jacket pressure 3 bar: allowable temperature 180 °C: material 1.4404.With a ...
General SKU261Y312 MakeFryma Koruma Serial5357 Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume5200 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity5200 l. (5345 l.) Conical bottomcheck Manholeø 500 mm Top connectionscheck OutletV230 With jacket210 l. Max. temperature130 °C, jacket 180 °C With propellor stirrercheck Motor30 kW, 400 V 1480 rpm Speed mixing shaft27 rpm MaterialStainless steel 1.4404 (316L) With jacketcheck General TypeV230/5200 Year of construction1995 With switchgear(as is) Floor space10 x 4 m Extra SpecificationsTank Hermann Waldner, volume 5345 l., pressure -1/2,5 bar, allowable temperature 130°C, jacket volume 210 l., pressure 3 bar, allowable temperature 180°C, with agitator and scra ...
General SKU261Y313 MakeFryma Koruma Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume5200 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity5200 l. (5345 l.) Conical bottomcheck Manholeø 500 mm Top connectionscheck OutletV230 With jacket210 l. Max. temperature130 °C, jacket 180 °C With propellor stirrercheck Motor30 kW 400 V 1480 rpm Speed mixing shaft27 rpm MaterialStainless steel 1.4404 (316L) With jacketcheck General Serial5302 TypeV230/5200 Year of construction1995 With switchgear(as is) Extra SpecificationsTank Hermann Waldner, volume 5,345 l, pressure -1 / 2.5 bar, allowable temperature 130 °C: jacket volume 210 l, pressure 3 bar, allowable temperature 180 °C: with agitator and scraper, 1,480 / 27 ...
CONTROLS electronic controls WORKING RANGE SURFACE GRINDING grinding length: 600 mm grinding width: 200 mm TABLE (SURFACE GRINDING) magnetic table: yes MAGNETIC TABLE length: 600 mm width: 200 mm weight: 100 kg SPINDLESTOCK GRINDING SPINDLE spindle revolutions (max): 4200 /min GRINDING TOOL type of grinding tool: wheel diameter (max): 250 mm borehole: diameter: 51 mm width: 25 mm ELECTRICAL SPECIFICATIONS total power consumption: 7.5 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3000 mm space requirements -front/back-: 2540 mm total height: 1850 mm total weight approx.: 2000 kg
JUNG JF 520 ist eine Flachschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Tisch 600×200 mm, Schleiflänge 600 mm, Schleifbreite 230 mm, Schleifhöhe 400 mm; Abstand Tisch–Spindelmitte 500 mm; Verfahrwege X 700 mm, Y 200 mm. Technische Daten: Schleifscheibe Ø225×25 mm (Bohrung 50 mm), Drehzahlen 1000–4000 t/min (stufenlos), Tischgeschwindigkeit 1–24 m/min, Kriechgang 100–450 mm/min, Vertikalvorschub 1–400 mm; Anschluss 3×380 V 50 Hz; Schleifspindelmotor 1.1/3.6 CV; Gesamtleistung 8 kVA; Gewicht ~1850 kg; Abmessungen 2250×1500×1850 mm. Zubehör: Teilapparat, Kühlmitteleinrichtung, Papierfilter, Elektro-Magnetspannplatte 500×200 mm, schwenkbare Magnetplatte 250×150 mm, Diamant-Abrichtvorrichtung, Abrichter auf Tisch, Profilabrichter DIAFORM, Digitalanzeige 2 Achsen HEIDEHAIN, Öl-Kühlaggregat. Erreicht enge Toleranzen; ...
Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009
Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
Size: 520 mm Equipments: Exchangeable casettes format change system Perforation unit for Business forms Remaliner 3 finishing options: Folded, Sheet and Reel 6 Offset units 6 x 24 Inch printing unit inserts 2x UV R/V dryer
Striebig vertical panelsaw Compact 5207 C – 2005 Manufacturer: Striebig Type: 5207 Compact TRK M-Nr.: 30215 Year: 2005 Motor: 3.0 kW – 3 400V 50Hz Diameter: 250mm (ID 30 mm) Bore: 30 mm RPM: 5.250 rpm Dimensions: Max. saw length: 4.600 mm Max. saw width: 2.070 mm Max. saw depth: 1.958 mm Saw dept: 60 mm Machine length: 5.826 mm m Machine height: 2.838 mm Machine dept: 1.428 mm Product support bottom: Rolls Product support small work pieces: Yes Length measuring system: analog Saw turning: manuel Saw movement: manuel Machine support: Self-supporting A-frame Dust extraction: ø100 mm Saw position fixation: manual Equipped with: Emergency stop Motor brake
Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs
Plasma Cutting Machine SAF nertaZIP 520 04808 - 2300 Cutting capacity: max 20 mm 3~ 220 / 380 V Cutting gun with 5 m cable Dimensions: 500 x 750 x 1000 mm
Division 4x90° Auction-ID: A1-48552-67
NEW, Width: 200 cm, Dead weight: 493 kg, Capacity: 1.75 m³, suitable for JCB 520-50 mount
NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment
NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment
NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment
Plant has already been partially dismantled Incl. 4 grinding wheels and magnetic table Auction-ID: A1-49674-59
maximum number of results exceeded
please refine your search
150 € 
