133,955 used machines on RESALE, but how to find them? Machine Search
pressure:40 t throat:300 mm stroke:630 mm Distance table/ram, stroke up:900 mm Table surface area:620 x 520 mm Hole in the table:150 mm table height over floor:600 mm Ram surface:150 mm Power capacity:15,0 kW Weight:4,5 t Dimensions (WxDxH):1,0 x 1,9 x 3,0 m German Safety: permitted for manual loading:CE-sign
Pressure:080 t throat:345 mm stroke:20 - 160 mm no. of strokes:65 /min distance table/ram, max. stroke up, adjustment up:495 mm table surface area:920 x 610 mm table height over floor:800 mm Hole in the table:280 mm passage to the back:670 mm ram surface:650 x 400 mm ram adjustment:50 mm power capacity:10,0 kW weight:7,7 t Dimensions (WxDxH):1,5 x 2,2 x 3,15 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:hydraulic ram adjustment:motoric
pressure:800 t distance between columns:1050 mm stroke:200 mm no. of strokes:8 - 25 /min distance table/ram, max. stroke up, adjustment up:1300 mm Side window:550 mm table surface area:1030 x 900 mm Capacity of ejector in table:15 t Stroke of ejector in table:85 mm ram surface:1040 x 800 mm ram adjustment:120 mm Capacity of ejector in ram:12 t ejector stroke in ram :80 mm power requirement:36,0 - 112,6 kW weight:65,0 t Dimensions (WxDxH):3,0 x 3,1 x 6,07 m ejector in table:hydraulic ejector in ram:hydraulic
pressure:315 t distance between columns:2350 mm distance table/ram, max. stroke up, adjustment up:1200 mm distance between cutting impact cushioning:1600 mm Distance table/ram, stroke up:1200 mm stroke:800 mm table surface area:2060 x 1260 mm table height over floor:750 mm Die cushion pressure in table:100 t Die cushion stroke in table:400 mm die cushion area:1250 x 1000 mm side window:780 mm ram surface:2200 x 1500 mm Capacity of ejector in ram:63 t speed down:500 mm/s speed up:310 / 410 mm/s working speed:20 - 73 mm/s quantity of oil:3900 l power requirement:80,0 + 45,0 kW weight:55,0 t Dimensions (WxDxH):4,6 x 2,7 x 7,2 m Height above floor:6,0 m Height below floor:1,2 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:hydraulic cutting impact absorption:hydraulic
pressure:160 t throat:450 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:580 mm table surface area:1000 x 1000 mm die cushion capacity:20 t die cushion stroke:300 mm ram surface:700 x 750 mm feed down:400 mm/s feed up:400 mm/s table height over floor:1350 mm die cushion area:Ø 350 mm power capacity:55 + 11 kW weight:19,5 t Dimensions (WxDxH):1,5 x 3,5 x 4,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch depth stop:mechanisch
Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 8.0 kN Stroke 40 mm Projection 90 mm Working height from up to 50 - 200 mm Table surface 120 x 160 mm Machine weight approx. 22 kg Dimensions L x W x H 160 x 230 x 410 mm Condition: never used / new (5)
Toggle hand presses HK 1700 stroke 60 mm with crank with working height fine adjustment Height of the stand 450 mm Without additional effort, even more pressure in production. Maximum pressure output shortly before the end of the stroke thanks to toggle technology. Particularly stable design of spindle head and stand Pressure 17.0 kN Stroke 60 mm Projection 105 mm Working height from up to 75 -180 mm Table surface 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions L x W x H 260 x 130 x415 mm Condition: never used / new (5)
With patented MULTIFORCE hub connection system!, The punching press automatically adjusts the cutting force to the size of the punch tool., It does not matter how resistant or thick the material to be cut is., Cutting table: 1,000 x 500 mm, Reach: 370 mm, Maximum cutting capacity: 25 t – 245 kN, Dimensions: 1.000 x 1.140 x 1.710, Net weight (with oil): 1.020 kg
Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data Capacity: 1,500 kg/h (apples) Application: Juice extraction from crushed apples Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems
TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with
TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-
Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;
Working width: 600 mm; Working height: 5mm to 300mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex, diameter 210mm; Height adjustment: electric; Altitude display: digital; Feed speed: 4 - 14 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 700kg;
Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm;
Working width: 380 mm; Working height: 150 mm; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 210mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;
Multi-purpose machine rarity Circular saw, milling machine, slotted hole drilling machine in one machine Solid Casting Block Auction-ID: A1-46501-2596
Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...
Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)
Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.
A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...
FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser ...
Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table
Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m
La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...
Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm
Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available
The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...
The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...
Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...
TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250
TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340
Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001
End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.
Machine base soil tillage machine, floor cleaning machine, floor curing machine -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply -Voltage: 230V -Dimension: 600/440/H370 mm -Weight: 29 kg
Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...
Rubber balls as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 30mm Material: EPDM, NR/SBR, silicone, PUR, silicone (detectable), polyurtehane (detectable) Quantity: 1 pack (100pcs) possibly small quantities Price: On request (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)
Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)
Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)
Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly with minimum order quantity)
Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 996 7 1496 7 1996 Material: NBR/SBR 408 RED and NBR 60 HELL Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
Struts Tumble screening machine as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 25 by 6mm Material: NBR (FDA) Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)
maximum number of results exceeded
please refine your search
