ruderer press machine used for sale

pressure: 160 t stroke: 400 mm dayligth: 900 mm Heads: 225x135 mm feed down: 6,2 mm/sec feed up: 9,8 mm/sec total power requirement: 6 kW weight of the machine ca.: 1.300 kg dimensions of the machine ca.: 1640x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t stroke: 400 mm total power requirement: 4,0 kW : 7,4 mm/s : 11,5 mm/s Heads: 160x95 mm weight of the machine ca.: 725 kg dimensions of the machine ca.: 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm dayligth: 900 mm distance between columns: 300 mm Heads: 175x115 mm feed down: 7,6 mm/sec feed up: 13,4 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 350 mm stroke: 130 mm stroke of worktool slide: 3070 Hub/min ram adjustment: 100 mm ram surface: 500x300 mm table surface area: 1000x600 mm feed - rapid adjustment: total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

Continuous veneer press panel size 3200/1400mm External and inner hydraulic cylinders Press pressure can be adjusted separately Panel heating steam and electricity

HL 60 ton Capacity: 60 ton Passage between uprights: 410 mm Distance between table -- ram: 670 mm

HL 60 ton Capacity: 60 ton Passage between uprights: 410 mm Distance between table -- ram: 670 mm

Weingarten AR 63 ton Capacity: 63 ton Max adjustable stroke: 8 > 100 mm Drawning speed: 56/84 str/min Dimension of the table: 620 x 500 mm Dia table hole: 250 mm Punchholder dia: 40 mm Course adjustment: 63 mm Weight: 4 ton

Orma LS/ECO/CA 30/13 self-loading press Working length 3000mm Working width 1300mm Automatic material loading Adhesive Application System Shelves heated with oil up to 130C Upper clamping force 57t Side clamping force 9t Year of production 2001 CE Certified

Vacuum diaphragm press Wemhöner type VARIOPRESS model Basic 1000 S Specifications: Heating plate format (mm): 2850 x 1550 Electric heating plate design: aluminium top heating plate Total pressing force (kN): 2400 Chamber pressure max. (bar): 6 Operating temperature max.: 180 degrees Celsius Batch or workpiece size max. (mm): approx. 2460 x 1180 Thermoplastic film as roll goods: Width of the film: approx. 1430 mm Thickness of the foil (mm): approx. 0.25 - 1 Hyperbaric chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

various pressure zones IMA - from stock - price on request

Briquet press Make: Reinbold Type: RB 30 SV New machine Technische Daten: Reserve container approx. 1044 x 1044 x 1010 mm Hydraulic motor: 5,5 kW Briquett-Ø 50mm Oil quantity: 100 l Weight: Approx. 700 kg The max. material moisture should not exceed 18% Description The whole briquet unit consist of an easy-maintenance hydraulic, a powerful drive for the agitator as well as the the fill and press cylinders. The unit is compact placed on the machine. The accessable construction makes the service easy. Hydraulic unit consists of: motor, pressure switch, valve block, manometer, oil filter Switch box mounted on container, with SPS-Control Automatic Star-Delta-start Low oil switch Screw conveyor channel, screw conveyor Manual cylinder control Automatic end positioning of all cylinders Safety switch for oil temperature Connection for transport hose or c ...

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 15 mm V-RING   nominal force: 75 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm   distance between columns (H-frame): 560 mm   passline opening (free passage in side columns): 270 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step max.: 999.99 mm   sheet length min: 1900 mm   pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into indivi ...

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   height above floor level: 700 mm SLIDE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 400 mm/s   working velocity min.: 5 mm/s   working velocity max.: 160 mm/s   return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm   distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 370 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 81000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system ...

CONTROLS   PLC SIEMENS S7-400 PRESS DESIGN   drive system: hydraulic   number of suspensions: 1   slide ejectors / cushion: no   table cushion: no   opening in table: no   feedstock transport direction: back-front PRESS FORCES   total force (nominal): 1000 to PRESS TABLE   table surface (left-right): 2066 mm   table surface (front-back): 2000 mm   height above floor level: 630 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 600 mm/s   working velocity min.: 15 mm/s   working velocity max.: 40 mm/s   return velocity max.: 390 mm/s   return force: 100 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1710 mm   distance table - slide max.: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 160 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   height abov ...

PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 60 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 470 mm   lower table (front-back): 470 mm   upper table (left-right): 500 mm   upper table (front-back): 470 mm   shut height max.: 277 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 180 mm ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1950 mm   space requiremen ...

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Type 210 standard 13 Shear: 13 mm Flat steel: 150 x 16 mm Punching:nbsp; example: dia 25 in 16 mm Stroke: 27 mm 50 ton Notching: 12 mm L/T steel: 80 x 10 mm U steel: 140 mm I steel: 160 mm round bar steel: 42 mm square bar steel: 38 mm L-profile 90°: 110 x 10 mm L-profile 45°: 90 x 9 mm Punching pressure: 50 ton Power needed: 3 kW Length: 1270 mm Depth: 800 mm Height: 2180 mm Weight: 2 ton

Frame press Hess Type VARIANT Machine No. 2182 Built in 1979 Pneumatic Frame Press Workspace 3700 mm x Height 2300 mm 4 bars with pressure cylinders from above Stop side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke 110 mm Compressive force per cylinder 1100 kp (1kp = 1kg) Compressed air connection max. 15 bar Weight approx. 550 kg Exterior Dimensions 4400 mm x 700 mm x H 2800 mm Loading dimensions 4400 mm x 600 mm x H 2300 mm + Pallet with pressure beam 2800 mm x 800 mm x H approx. 700 mm

Machine data: Press force: 3,000kN Roller diameter: 850mm Working width: 400mm Briquette dimension: 38 x 32 x 16mm Briquette volume with 4mm gap: approx. 16cm³ Briquette weight: approx. 38g Throughput capacity: 30,000kg/h Rated speed: 17.9/min Circumferential speed: 0.79m/s

General Manufacturer: Transmatic Type: TS-3M Year of Make: 2007 Plate size: 38 x 38 cm Maximum pressure: 600 g/cm2 Temperature setting: 50 – 305°C Condition Condition: Used Functional: Tested and fully functional

with 63 filling valves and 16 head crown corker 26 mm with double pre-evacuation system Work direction: from right to left Product: beer and other products with CO2 Capacity: approx. 25.000 bph - by 500 ml bottles approx. 30.000 bph - by 350 ml bottles More technical details you can see on the technical data sheet. Complete documentation, manual, spare part list, electrical documentation are available. The filler was in production in a Germany brewery and can be inspected on side.

Manufacturer: Wemhöner, Year: 1994, Type: Membranepresse, Number of tables: 2, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Thermoöl, Max.Teilegrösse mm: 3.200 x 1.300, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 3.200, Min.-max. workpiece height in mm: 10 - 50, Membrane: yes, Durchmesser Presskolben: ca 180, Placing table: 2, Membrane: yes, Pressing cylinder: 5, Landing opening mm: 220, Automatische Entleerung: yes, Folienschneidmaschine Hersteller: yes, Folienkalander: 16 Rollen, Foil cutter: 2, Year :1994

Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998

Manufacturer: Sergiani Querdurchlaufpresse Warmwasser, Type: GSA, Year: 2009, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3500 X 1300, Number of storeys: 1, Cylinder stroke: 350, Charging side: Quer, Landing opening mm: ca.350, Steel heating plates: yes, Min-max temperature: 0-120, Heated by: Warmwasser, Overall pressure kN: ca.4 kg²cm, Press length mm: 3500, Pressing width mm: 1300, Transport roller conveyor: yes, Thermoilpumpenstattion: yes, Lateral press: yes, Belt conveyor: yes, Year :2009

Manufacturer: Kallesoe, Width mm: 1350, Length mm: 5000, FREE TEXT: With feeding KL20 and stacking line,

Manufacturer: Istel, Type: Korpussprese Nischen schränke, Year: 1992, Korpuspressen-Montagelinie: no, Work piece width min-max mm: 250-550, Min.-max. workpiece length in mm: 500-2500, Min.-max. workpiece height in mm: 150-350, Working widht max mm: 550, Working width min min mm: 250, Hydraulical/pneumatical: Hydraulisch, Floors and sides: 10 Böden wählbar, Year :1992

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Manufacturer: Hess , Type: Rahmenpresse, Year: ca.1995, Work piece width min-max mm: ca.1500, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-90, Working widht max mm: 2500, Hydraulical/pneumatical: elektrisch, Year :ca.1995

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

Manufacturer: Bürkle, Type: U110 , Year: 1990, Stages: 3, Lateral press: yes, Heizplattenmasse ca.mm: 3000x1300, Anzahl der Etagen: 3, Zylinderhub mm: ca.400, Beschickungsseite: längs, Landing opening mm: ca.100, Heizplatten aus Stahl: Stahl-Aluminium, Temperatur min-max: 150, Heated by: Warmwasser, Gesamtdruck KN: 1100, Anzahl der Presszylinder: 8, Time switch: yes, Press length mm: 3000, Pressing width mm: 1300, Year :1990

Manufacturer: Friz, Year: 1997, Type: MFP 22/14/11, Press length mm: 1100, Pressing width mm: 800, Work piece thickness max mm: 95, Year :1997

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Manufacturer: Wemhöner Membranenpresse, Year: 1996, Type: KT-VP 28, Number of tables: 1, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Elektro, Nutzfläche : 2500 X 1300, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10--60, Working widht max mm: 1300, Press length mm: 2500, Pressing width mm: 1350, Kw Heizleistung obere Heizplatte: yes, Max. temperature °C: 220, Foil magazin spaces: 8, Veneer/ foil thickness max mm: möglich, Through running machine: yes, Folienpaternoster: yes, Through running machine: yes, Year :1996

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

Manufacturer: Ocamc, Type: Kopp Elta, Year: 1990, Min.-max. pressing length in mm: 2500, Min.-max. pressing height in mm: 1200, Min.-max. pressing depth in mm: 600, Compressed air bar: 6, Year :1990

Manufacturer: Istel, Type: Eckschrankpresse, Bauyeshr : 1998, Hydraulical/pneumatical: motorisch/pneumatisch, Press hight mm: 1050/900/800, Press depth mm: 1050/900/800, Machine rigging: automatisch, Compressed air bar: 6, Gewicht ca. kg : 2000, Year :1998

Manufacturer: Itallpress, Type: GL 120, Stages: 1, Heizplattenmasse ca.mm: 500 X 1200, Anzahl der Etagen: 1, Zylinderhub mm: 310, Beschickungsseite: quer, Landing opening mm: 320, Heizplatten aus Stahl: yes, Temperatur min-max: ca.140, Heated by: Elektro, Spezifischer Druck: 400 Tonnen, Press length mm: 1200, Pressing width mm: 500, Number of cylinders: 4 /Durchmesser 150, Zykluszeit mm: 320, FREE TEXT: Verlademasse 1200 X 2100 X 2870 mit Ölbehälter 24000 ohne Behälter/Hydraulik Kw 5,5,

Manufacturer: Sergiani, Type: LAS 230, Year: 1999, Stages: 10, Heizplattenmasse ca.mm: 2500x1300, Anzahl der Etagen: 10, Heated by: Warmwasser, Press length mm: 2500, Pressing width mm: 1300, Press power kg /cm²: 7,69, Electrically heated kW: 21, Work piece thickness max mm: 80, Year :1999