127,247 used machines on RESALE, but how to find them? Machine Search
Key data: 22 t, 900 mm, 850 mm
Bending cell RoboCone RC9 CoastOne - Made in Finland Complete bending cell with a Cone C9 electric press brake and a Yaskawa / Motoman GP25 (25kg) robot. Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
automatic baler Manufacturer: PAAL Type: KONTI 600 G/S/K with cross-binding Year of construction 2012 Operating hours: approx. 44,700 hours specifications: Press force: 1,546 kN System pressure: 315 bar Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW Pump capacity: 3 x 420 Ltr. Oil tank volume: 3,100 ltr. Throughput:approx. 780 m³/h Capacity at idle: approx. 1,220 m³/h Capacity at 35 kg/m³: approx. 26.5 t/h Output at 60 kg/m³: approx. 44.0 t/h Output at 100 kg/m³: approx. 69.0 t/h Control: Siemens S7 Setting: 5-fold vertical Additional 4-fold automatic horizontal tying Bale weight: approx. 800 - 1,250 kg depending on the material to be pressed and bale length Machine weight: up to approx. 42 t Includes a top pressure plate slot cover Printing plate was renewe ...
Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg
automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t
automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg
Fortuna semi-automatic bread roll press size A4 Bakery condition Ball knob repaired with duct tape two press plates as good as new Knife in very good condition, as not used for sourdough absolutely neat and smooth running Video about test run and more pictures available
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extr ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinu ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for simulation and processing - 17″ high-resoluti ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 programmes consisting of 25 steps and 99 repetition ...
LWB Steinl Injection Machine Type VCE -T 500/160 T Clamp power 500 KN Injection volume 160 cm3 Year 2006 6 Bar 400 v 50 hz 26 KW
LWB Steinl Injection Machine Type VREFE 1600/1000/170 Heating platen size 500 X 510 X 63 mm Sliding platens Top and bottom ejectors Clamping force 1600kN Opening force clamp 100kN Clamping stroke 395mm Injection volume E 1000 ccm Max. Injection Pressure E 2200 bar Injection volume EF 170 ccm Max. Injection Pressure EF 1800 bar Hours: 700 since new Year 2009 Weight 6000kg
Heated Bonding Press Manuf.: Paul OTT Model JU3013 415v 51kW (Tech data attached)
T15 - used approx. 45 m³ / 45,000 L steel tank, pressure tank, coated inside, lying on steel bases. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Steel tank with inner coating Manufacturer: Tank- u. Stahlbau Abersfelder Dimensions: approx. Ø 2.30 m × L 11.00 m / H total 2.50 m Other: Used steel tank with Poxitar inner coating (2-component polyester resin), professionally cleaned and in good condition. Pressure tank 10 bar. Horizontal storage container on 2 steel bases, several inlets and outlets. Can be used as an above-ground tank or as an underground tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., o ...
Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die
Suitable for mixing powdery and liquid media Parts in contact with the product made of stainless steel 1.4435 (AISI 316 L) Useful volume 8-32 litres Operating pressure -1.0 to +10 bar Temperature range 0-130°C Max. Product viscosity approx. 10,000 mPas Agitator tank 75 litres with double jacket 5 litres Feed vessel 3.3 litres, operating pressure 0-10 bar, operating temperature max. 150°C, manufactured by Jentec, year of manufacture 2015 Centrally arranged anchor agitator, power 0.37 kW, speed range 10-50 rpm, additional conveying elements on agitator shaft and outer anchor (product lowering), PTFE scraper elements for tank wall and base, double-acting mechanical seal, silicone oil sealing liquid Eccentrically mounted propeller agitator with 2 blades Operated with external circulating homogeniser for emulsifying and pumping over and out (not in ...
Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 – 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German.
Used Feintool HFA 4000 equipped with Feeder Line Saronni total force 2500-4000 kN blank holder force 200-2000 kN back pressure force 100-1000 kN shearing force 1000-3700 kN safety distance 14 mm FEEDER LINE brand SARONNI year 2006 - completely overhauled in 2012
Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg
Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800
Drive gear for hot forging press K8548 6300T Weight, kg 15 700
Driven gear for hot forging press 6300T Weight, kg 1300
Clutch hub for hot forging press K8548 6300T Weight, kg 7100
with the following standard equipment: Chromed cylinder, welded steel frame, oil pressure gauge, pressure adjustment Optional equipment possible for an extra charge: Pressure Regulator, V-Block, Automatic Control, Hydraulically Moving Cylinder Pressure: 80 t Stroke: 400 mm Total power requirement: 3 kW Machine weight: 725 kg Dimensions: 900 x 1560 x 2400 mm Passage in the table: 900 mm Working speed: 5.4 mm/sec Return speed: 8.3 mm/sec
SMC Pressure Sensor ISE40A-01-T 0.1-1.0MPa
Key data: 220 t, 4000 mm
with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.
horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater or above ground with brackets, e.g. for molasses, AHL, ASL, water, corn mixture Volume: 32,000 L Dimensions: Ø 2.50 × 7.0 m long
Silo 20 m³ volume with hook holder Payload 28 to, dead weight 2500 kg Diameter 2500 mm, height 6600 mm, outlet height 1100 mm Outlet NW 250 Blow-in line, vent line, inspection cover NW 500 Silo butterfly valve Footprints 2400 x 2500 mm Next Pressure Test 07/28
Pressure silo 29 m³ volume, payload 46 to, dead weight 3000 kg Diameter 2500 mm, height 8600 mm Spout height 1250 mm / 900 Ball valve DN 65 Inspection Cover NW 500 Blow-in line, vent line
Pressure silo 34 m³ volume, payload 48 to, dead weight 3000 kg Diameter 2500 mm, height approx. 9000 mm Cone with air loosening Spout with ball valve DN 80 Inspection Cover NW 500 Silo Back Protection Ladder Blow-in line, vent line Pressure test book not available
Pressure silo 3 m³ volume, payload 4800 kg, dead weight approx. 1200 kg Diameter 1750 mm, stand dimensions 1700 x 1720 mm, Spout height 1200 mm / 900 mm Outlet flap NW 250, silo tip with ball valve DN 65 Filling lid NW 450 in the silo roof, Inspection cover NW 450 in silo cylinder Crane eyelets, forklift pick-up shoes Vertical ladder + platform
Pressure test book not available - sold as a free-fall silo Silo 34 m³ volume, payload 50 to, dead weight approx. 4000 kg Diameter 2500 mm, height approx. 9000 mm Outlet with silo butterfly valve NW 250 Inspection Cover NW 500 Blow-in line, vent line
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000
Bipel Tiltmaster 120 Press Closing force 120ton Platen size 458 x 458 Opening force 180KN Ram stroke 100mm With vacuum Max. Daylight between platens 200mm Overall dims: 1195mm wide x 1000mm deep x 2000mm high Weight: 3000kgs
If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for a custom quote HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 20T PHC Pellet Press Machine Type: Hydraulic Single Column Press Year of construction: 2023 Location: Gelsenkirchen, Germany Specifications: - Press force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Print build-up time: max. 2 seconds (Closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20°C - Deflection:
# Description text for the press If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Mold opener-closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Specifications: - Pressing force: 40 tons - Maximum open height: 1800 mm - Tappet travel: 1500 mm - Oil Temperature Monitoring: Electric Air Cooling - Lubrication: Manual via grease fitting - Extending table travel: 1200 mm - Extending table speed: 30 mm/sec - Electrically infinitely variable ram: 180 degrees - T-slots: According to customer requirements - Pressure setting: From 10 tons to 40 tons - Monitor: 10" on the control cabinet for pressure adjustment and warning ...
Specifications Maximum pressure: 56 tons Year of Make: 2016 Press force: 3.8 kg/cm² Number of bindings: 5 Channel cross-section: 1100 × 750 × 600÷1200 mm Dimensions of the tailgate: 990 × 1250 mm Bale weight: 250 - 500 kg Weight: approx. 15.5 - 17.5 t Power connection: 3 × 400 V250 - 500 kg Bale tying: automatic Drive power of the main motor 75 kW Nominal current of the main motor 125.22 A Pump capacity 438 l/min Oil cooler 4kW Oil heating 1 kW Theoretical throughput 535 m3/hour Theoretical flow rate to density 20 kg/m - 10.70 tons/hour Theoretical throughput to density 50 kg/m - 26.75 tons/hour Machine in operational condition, in continuous operation. Courtesy, please contact the seller directly regarding this machine tel. 508 115 007
Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 3-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 25 to 80 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package More dough dividers in stock!
Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-14 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 130 to 400 grams/piece Pitch 14 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Many more dough dividers in stock!
Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Subrange 40 to 120 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Option: other knitting plates Maintenance contract Many more TOP roll presses in stock!
The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000
used
Used Hermetic Press - Plate Press for Concrete Slabs, Terrazzo Slabs, etc. Manufacturer: OCEM Type: OPA850 Year of Make: 1994 with washout system for exposed concrete, flat storage and steel pallets Used hermetic press - slab press for concrete slabs, terrazzo slabs, etc. Manufacturer: OCEM Type: OPA850 Year of construction: 1994 with washing system for exposed aggregate concrete, flat cycle and steel pallets
Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg
SPECIFICATIONS: Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 Diameter Ø 90 mm Piston stroke mm: 470 Complete with intermediate plate Operation with water
maximum number of results exceeded
please refine your search
