rucks hydraulic press used for sale

pressure: 160 t stroke: 400 mm tank capacity: 51 l pressing speed: 2,40 mm/sec column daylight: 1500 mm feed speeds: 7,48 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar engine output: 3,0 kW speeds:: 2 : 280 mm range L-W-H: 2125 x 935 x 2270 mm weight of the machine ca.: 1430 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm tank capacity: 54 l pressing speed: 2,47 mm/sec column daylight: 750 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar engine output: 2,2 kW speeds:: 2 : 220 mm range L-W-H: 1665 x 865 x 2140 mm weight of the machine ca.: 970 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm tank capacity: 54 l pressing speed: 2,47 mm/sec column daylight: 1500 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar engine output: 2,2 kW speeds:: 2 : 220 mm range L-W-H: 2065 x 865 x 2080 mm weight of the machine ca.: 1145 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t stroke: 500 mm tank capacity: 70 l pressing speed: 1,74 mm/sec column daylight: 1750 mm feed speeds: 4,9 mm/sec return speed: 5,67 mm/sec Pressure power: 260 bar engine output: 5,5 kW speeds:: 2 : 325 mm range L-W-H: 1925 x 975 x 2270 mm weight of the machine ca.: 2320 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t : 490,5 kN Pressure power: 399,5 bar : 140 mm working width: 1100 mm Dimensions (HxWxD): 2050 x 760x 1100 mm column daylight: 750 mm distance between columns: 300 mm piston stroke: 160 mm weight of the machine ca.: 309 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t stroke: 160 mm table surface area: 560 x 255 mm table length: 695 mm table width: 230 mm Pressure power: 374,6 bar piston stroke: 160 mm tank capacity: 1,5 l column daylight: 560 mm diameter of piston: 110 mm weight of the machine ca.: 175 t dimensions of the machine ca.: 830 x 640 x 2030 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 400 mm tank capacity: 51 l pressing speed: 1,84 mm/sec column daylight: 1300 mm feed speeds: 5,73 mm/sec return speed: 7,08 mm/sec Pressure power: 243 bar engine output: 3,0 kW speeds:: 2 : 325 mm range L-W-H: 1925 x 975 x 2270 mm weight of the machine ca.: 1690 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t stroke: 400 mm tank capacity: 51 l pressing speed: 2,40 mm/sec column daylight: 1100 mm feed speeds: 7,48 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar engine output: 3,0 kW speeds:: 2 : 280 mm range L-W-H: 1725 x 935 x 2200 mm weight of the machine ca.: 1195 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t stroke: 380 mm tank capacity: 51 l column daylight: 750 mm feed speeds: 15 mm/sec return speed: 18,11 mm/sec turning speeds: 3000 U/min Pressure power: 221 bar engine output: 1,5 kW speeds:: 2 : 130 mm weight of the machine ca.: 385 kg dimensions of the machine ca.: 2120 x 695 x 1315 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 180 to Total stroke: 150 mm Rapide stroke Execution: 4 columns Table surface: Length: 800 mm Width: 500 mm Distance from table to slide-nose: min.: 540 mm max: 690 mm Passage between columns: longitudinal: 460 mm Lateral: 260 mm Min. stroke: 16.6 mm/s Max. stroke: 83.3 mm/s Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Necessary air quantity Machine´s weight about: 5000 kg Overall dimensions machine: Length: 2000 mm Width: 1800 mm Height: 3500 mm Various accessories: Lower extractor

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 25 to Total stroke: 150 mm Execution: 4 columns Table surface: Length: 450 mm Width: 400 mm Slide diameter: 120 mm slide bore diameter: 38 mm Distance from table to slide-nose: min.: 120 mm max: 270 mm Passage between columns: longitudinal: 500 mm Lateral: 200 mm Voltage 50 Hz 3x: 380 Volt Total power required: 10.20 HP Machine´s weight about: 1750 kg Overall dimensions machine: Length: 1500 mm Width: 1100 mm Height: 2700 mm Various accessories: Security/savety device Foot pedal

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 6044 Technical data Pressure: 40 to Pressure: 400 kN Pressure: 260 bar Total stroke: 300 mm Execution: 4 columns Table surface: Length: 650 mm Width: 650 mm Min. stroke: 33 mm/s Max. stroke: 120 mm/s up: 450 mm/s Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Motor power: 15 kW Machine´s weight about: 5200 kg Overall dimensions machine: Length: 1750 mm Width: 1200 mm Height: 3500 mm Various accessories: Security/savety device Ziehkissen pneumatisch: number (steps): 2 Force du cylindre: 30 kN Total stroke: 100 mm

Key data: 25

Capacity: 25 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm Technical data Pressure: 25 to Total stroke: 100 mm Execution: 4 columns Table surface: Length: 640 mm Width: 430 mm Passage between columns: longitudinal: 450 mm Lateral: 240 mm Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Total power required: 10.00 HP Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1400 mm Width: 1400 mm Height: 2200 mm

pressure: 40 t distance between columns: 600 mm stroke: 160 mm dayligth: 360 mm table-size: 560 x 400 mm ram hole: 40 H 7 DIN 810 mm oil volume: 500 l return speed: 200 mm/sec die cushion hydr. pressure/stroke: 60 capacity of ejector: 25 t total power requirement: 15 kW dimensions of the machine ca.: 1.44 x 0.95 x 2.54 m pressing speed: 27 mm/sec return speed: 200 mm/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t distance between columns: - mm stroke: 350 mm table size: 1150 x 700 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t stroke: 400 mm feed down: 200 mm/sec feed up: 450 mm/sec max. distance table - ram: 630 mm total power requirement: 8,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRESS brake OLEOTECNICA 125 tons Length 4000

LVD PP 50/21 Capacity: 50 Ton x 2500 mm Backgauge: no Passage between uprights: 2050 mm Max stroke: 100 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 5,5 HP Weight: 3,8 ton

Hydraulic pressure filter, 200bar, 34P-0014, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0014 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude  ...

Hydraulic pressure filter, 200bar, 34P-0016, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0016 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclud ...

Dresan 11 hot plate hydraulic press. Four pistons and 6 kg/cm2, automatic opening with timer or manual opening using a lever. Includes thermal and hydraulic oil. Circulation pump and thermometer. It works perfectly and can be viewed at any time.

Ras 3200 x 4 mm CNC Max worklength: 3200 mm Max tickness: 4 mm Distance between clampblock -- ram: 400 mm Max displacement back gauge: 1550 mm Eletric motor (power): 7,5 kW

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 S Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 t Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1991 Operating hours: 13.296 h Condition: Not tested, Disassembled from a working factory

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 ton Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1992 Operating hours: 19.470 h

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Total stroke: ca 300 mm Execution: 4 columns Table surface: Length: 530 mm Width: 380 mm Passage between supports: longitudinal: 550 mm Voltage 50 Hz 3x: 380 Volt Motor output: 7.5 HP Machine´s weight about: 2700 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 3200 mm

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Total stroke: 200 mm Execution: 1 support Table surface: Length: 290 mm Width: 230 mm Slide pressure: 4000 kg Distance from table to slide-nose: min.: 0 mm max: 250 mm Depth of throat: 118 mm Voltage 50 Hz 3x: 380 Volt Total power required: 3 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 900 mm Width: 700 mm Height: 1800 mm

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Shearing force: 20 / 300 kN Total stroke: 100 / 70 mm Power stroke: 22 / 6 mm Execution: 2 supports Slide diameter: 30 / 63 mm Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 bar Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2400 mm Various accessories: Déclanchement à deux mains

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Shearing force: 20 / 300 kN Total stroke: 100 / 70 mm Power stroke: 22 / 6 mm Execution: 2 supports Slide diameter: 30 / 63 mm Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 bar Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2400 mm Various accessories: Déclanchement à deux mains

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 4220 Technical data Pressure: 6.3 to Total stroke: 400 mm Mounting height max.: 500 mm Execution: 1 support Table surface: Length: 500 mm Width: 300 mm T-channel width: 14 mm Voltage 50 Hz 3x: 380 Volt Motor output: 7.5 HP Machine´s weight about: 900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2200 mm Various accessories: Déclanchement à deux mains

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 600 to Total stroke: 0 - 305 mm Table surface: Length: 3070 mm Width: 1530 mm Distance from table to max: 950 mm Passage between supports: Lateral: 1220 mm Slide clamping surface: Width: 3070 mm depth: 1530 mm Close traverse speeds: Rapid traverse: 296 mm/s Press stroke: 10 mm/s Return traverse speeds: 380 mm/s Motor power: 150 kW Overall dimensions machine: Length: 4250 mm Width: 2100 mm Height: (5700+900) mm

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 120 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11,0 kW weight: 8.650 kg range L-W-H: 4.250 x 2.050 x 2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles  ...

Technical data Total stroke: 700 mm Slide diameter: 300 mm Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 2900 mm

Capacity: 1 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm MACH-id    5166 MAKE        Eckold TYPE          HA 510 _+ MVZ 11 YOP            1996 DIMENSIONS Length     800 mm Width       500 mm Height      1200 mm

Capacity: 50 t Folding length: 1200 mm CNC Brand: Delem MAKE  Trumpf TYPE    Trumabend V50 YEAR   2005 SPECIFICATIONS Controll    Delem Pressbrake / Folding / Mech. / Hydr.    Pressbrake Hydraulic / Mechanical    hydraulic Bending length    1200 mm Distance between column    800 mm Press force    50 Ton Stroke    215 mm DIMENSIONS Length    2500 mm Width     2000 mm Height    2100 mm

Capacity: 100 t Folding length: 3000 mm CNC Brand: Amada CNC Model: aMNC SPECIFICATIONS Controll   AMNC Pressbrake / Folding / Mech. / Hydr.   Hydraulic Bending length   3100 mm Distance between column   2705 mm Press force  100 Ton Throat  4 20 mm Stroke   200 mm Die height  470 mm Backgauge stroke X in mm   1000 mm Number off controlled axis   7 Power   17 kW DIMENSIONS Length   4500 mm Width   2450 mm Height  2700 mm  

Capacity: 220 t Table length: 4300 mm Table width: 2000 mm Stroke: 0 mm MACH-id  3415 MAKE   Comessa TYPE   PR 220 YEAR    1975 SPECIFICATIONS   Hydraulic / Mechanical Hydraulic   Press force   220 Ton Table Length x Width   4.300 x 2.000 mm Die height  1.000 mm Power5.5 kW Comessa Portal straightening  

Capacity: 80 t Folding length: 2550 mm CNC Brand: Cadman SPECIFICATIONS Controll  CADMAN Pressbrake / Folding / Mech. / Hydr.Pressbrake   Hydraulic / Mechanical  Hydraulic Bending length   2550 mm Distance between column  2050 mm Press force   80 Ton Throat   400 mm Stroke   200 mm Die height   400 mm Number off controlled axis  7 Power  12.5 kW  

Capacity: 150 t Folding length: 3600 mm CNC Brand: Robosoft SPECIFICATIES Besturing   Robosoft Soort kantbank / zetbank / Mech. / Hydr .PressbrakeWerking Hydraulisch / Servo / Mechanisch  Hydraulic Max. buig lengte   3600 mm Buig lengte tussen kolommen  3150 mm Max. tonnage T / of dikte in mm   150 Ton Uitlading   250 mm Slag lengte  120 mm Inbouwhoogte  325 mm Bereik achter aanlsag  X in mm 750 mm Aantal gestuurde assen  2/3Vermogen Kw  11.4 kW

Capacity: 80 t Folding length: 2505 mm CNC Brand: _Unknown / Other CNC Model: Operateur 8 Axis SPECIFICATIONS Controll    Operateur 8 Axis Pressbrake / Folding / Mech. / Hydr.   Pressbrake    Hydraulic / Mechanical   Hydraulic Bending length   2505 mm Distance between column  2050 mm Press force   80 Ton Throat  400 mm Stroke100 mm Die height   370 mm Backgauge stroke X in mm    600 mm Number off controlled axis   8 Power  7.5 kW  

pressure:2,5 t

pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden

pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden

pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden

Capacity: 100 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: Operateur 2 SPECIFICATIONS Controll  Operateur 2 Pressbrake / Folding / Mech. / Hydr.  Pressbrake Hydraulic / Mechanical   Hydraulic Bending length    3100 mm Distance between column   2550 mm Press force   100 Ton Throat  400 mm Stroke  100 mm Die height  370 mm Backgauge stroke X in mm  0 - 600 mm Power  9 kW    

pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary

pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m

pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W