rucks hydraulic press used for sale

Two hydraulic valves from Rexroth, two hydraulic pumps and 5 hydraulic cylinders are offered, all new and indispensable as spare parts 1. 2 Stueck Rexroth Valves MNR: R900912485 DBW 10 B2-52/315-6EW230N9K4 FD: 48121 2. Voac Parker Hydraulics made in Sweden Part No. 3708719 Type F11-058-M8-CF-K-000 Ser No. 2000180541 3. Brueninghaus Hydromatik D-72160 Horb A10VSO 71 DR / 31R PPA12N00 FabrNr: 1117486 Bauj. 04/96 DR = 280 bar Vo =71 cm3 n=1500 min 4. 5 unused, two-sided hydraulic cylinders with bearings Type 70/50-280-625 Length from middle hole to middle hole approx. 625mm Total length approx. 750mm Piston diameter 70mm Rod diameter 50mm Piston path 280mm Special price

Hydraulic power pack, hydraulic unit BOSCH REXROTH Order No: 983885 Year of construction 1982 Tank capacity: 150 litres Operating pressure: 60 bar nominal pressure / max. 100 bar Volume flow: 20 litres /min. Motor power pump: 3 kW Mains connection: 380 volts, 50 Hz. - 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63 - 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid, type 4WE10D10OFLG24NZ4 - 1 piece pressure accumulator - various throttle valves, pressure regulators and pressure gauges - return line filter with indicator - hydraulic tank with maintenance cover Space requirement L x W x H: 950 x 750 x 1100 mm Weight: 400 kg good condition; used

Hydraulic unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic unit Year of construction approx. 1985 Operating pressure: max. 65 bar Volume flow: 20 litres/min. Tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece Hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and extending a double-acting hydraulic cylinder) - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 Net weight: 142 kg good condition; used

Hydraulic unit with hydraulic pump RACINE / VICKERS Hydraulic unit Operating pressure: max. 44 bar Volume flow: 13 litres/min. Tank capacity: 40 litres Engine speed: 950 rpm. Motor power: 0,75 kW Mains connection: 380 Volt, 50 Hz - 1 piece Hydraulic vane pump PVQ-PSS=-06CR-J11 - Hydraulic tank with maintenance cover and oil level sight glass - 2 pieces hydraulic hoses with 12L connections, length = 950 mm Space requirement L x W x H:: 700 x 400 x 750 mm Weight: 97 kg (without oil content); used

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump,, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic hose, hydraulic hose extension -Manufacturer: Enerpac, hydraulic hose type WP 700 -Length: 6m -Pressure range: up to 700 bar -Connectors: quick release coupling see photos -Transport dimension: Ø 430 x 50 mm -Weight: 2.4 kg/pc.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump,, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic hose, hydraulic hose extension -Hand hydraulic pump: hydraulic hose hydraulic hose extension -Length: 4m -Pressure range: 700 bar -Connectors: quick release coupling see photos -Transport dimension: Ø 350 x 50 mm -Weight: 1.9 kg/pc.

Single column hydraulic press, straightening press, punching bar ECKOLD press frame with hydraulic cylinder, mobile press, punching unit type RSD 1500 - 125 Masch. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Projection 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface 125 mm Installation height (tappet to table) max. 265 mm Table height above corridor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit tappet surface with 4 threads M16 and 20 mm guide groove, in the middle a centering hole 15 mm- 1 piece high-pressure hydraulic hose with male thread M30x1.5 mm , Hose length 4 meters - 1 piece High pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg good condition; used

Hydraulic C-frame press Tool testing press / straightening press Pressure power hydraulic unit approx. 400kg/cm2 Printing capacity of the press approx. 270to Partially overhauled! Hydraulic cylinder sour overhauled, recoat Table clamping area 1.300x500mm Flat of the printing plate 700x400mm Number of T-slots 2 pcs with width 22mm Piston rod diameter 290mm maximum installation height 750mm Piston path 350mm Extension C-frame to center piston 270mm Extension C-frame to front edge pressure plate 480mm Width C-frame 500mm Aeussere Dimensions Depth 1,800mm Width 1,300mm Rxvukelzy Height approx. 3,000mm Weight approx. 5to Rest according to photos Special price

Hydraulic Press 400 ton Nominal Power 400 ton Slide Stroke 800 mm Slide dimension 1300 x 1600 mm Table dimension 1300 x 1600 mm Cushion Stroke 350 mm . ELECTRICAL SYSTEM COMPLETELY REBUILT IN 2020

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

pressure:60 t passage width:800 x 700 mm stroke:200 mm total power requirement:11 kW control:Automatik über Zweihandbedienung :2 / Durchmesser 40 x 25 mm Stück :28,5 Lt./min. :700 mm :800 mm pre-running speed:121 mm/sec :13 mm/sec return speed:160 mm/sec :0 bis 60 sec :2 bis 121 mm/sec. :max. 9,5 mm/sec Capacity:20T Leistung 200 mm feed down:70 mm/sec

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

-Hobbing press -Make: Sack & Kiesselbach -Type: 500 Mp -Mach.No: 30407 -Capacity: 500 tons -Width between uprights : 420 -Daylight: 370 -Stroke: 340 -Clamping surface : Ø 500 -Closing speed: 100 mm/s -Pressing speed : 1.8 mm/s -Opening speed: 200 mm/s -Power -Dimension: -Weight 3.25 + .330 -L x W x H: 2.245 x 1.8 x 1.17

Brand NN Model: hydr hose press 8 - 63mm Year of construction: 2022, Unused Dimensions LxWxH (mm) 850 x 600 x 1320 Number of stucco in stock multiple Made in China Ø Diameter (mm) 8 to 63 Comments. Crimp from 8 to 63mm 2. Maximum opening: 120mm 3. Operating mode: manual transmission, automatic pedal 4. Largest Press Force: 600 tons 5. Oil Pump Pressure: 31.5 Mpa. 6. Electric Motor Power: 3 kw 7. Standard Voltage: 380v 8. 11 sets (8, 15, 19, 23, 26, 31, 36, 41, 47, 55, 63) 9. Weight: 300kg 10. Dimensions LxWxH: 680mm X 750mm X 1000mm 11. Press precision: 0.01mm 12.Tank: 60L 13. Oil pressure: 5ml/wheel 14. Noise: 65dB Conditions of sale As / is, no guarantee from seller

cast iron rupture disc for Favrin folding press gietijzer breekplaten voor Favrin vouwbank dem-rondelles de sécurité en fonte pour plieuse Favrin

Qty. 1 Second-hand extrusion press line Mfc.: SMS Schloeman, Junker, Allen Bradley Type: Direct press Built: 1987 Force: 2800 MT Billet dia.: 228 mm – 9” Length: 250-1000 mm Consist of: Logs Loading Table Logs Furnace Hot Shear Induction Heater Extrusion Press Pullers (2) Quenching Unit Hot Saw Run-out Table Stretcher Finishing Saw Aging Oven

Key data: 1250 t

For sale is a sinking press Sack + Kiesselbach pressure 1250 tons.

Hydraulic Straight Side Press P 313 Manufacturer: Russian Maker Model: P 313 Year of manufacture: 1985 Very good condition, after general overhaul in 2011! Machine with new electrics! our stock Rudniki Technical details : Max.Force: 250T Table: 1400x1700mm Slider stroke: 600mm Distance between table and slider: 1060mm Table thickness: 160mm Slider idle stroke: 290mm/sec. Slider working feed: 12mm/sec. Slider return: 150mm/sec. Daylight between columns: 1700mm Ejectror’s speed: 100mm/sec. Main motor: 40kW Press dimensions: 3665x2890x5200mm Press weight: 28.000kg

table 500/600 mm

Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.

Used hydraulic press HK 7

Used hydraulic press PHW 12

Hydraulic cylinder filter press Chamber filter press New, used and refurbished Ask us.

pressure:1000 t stroke:800 mm total power requirement:45 kW weight of the machine ca.:97 t dimensions of the machine ca.:4500 x 4400 x 5300 m Return Capacity:40 t Main Cylinder:(d=500mm) 2 Stück :(140 x 80mm) 2 Stück speed of forward flow:40 - 110 mm/sec Return Speed:150 mm/sec Press speed (infinitely variable via PLC):3 - 12 mm/s Table size:3000 x 2300 x 200 mm Ram plate:3000 x 2300 x 1000 mm demand for oil:ca. 1300 l :210 l/min :600 sec :1500 x 150 mm Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure  ...

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

pressure:20 t passage width:600 mm stroke:400 mm Weight of machine approx.:2,8 t dimensions:1960 x 900 x 2500 mm power capacity:5,5 kW table plate:600x600 mm pestle plate:500x500 mm daylight:400 mm table height over floor:850 mm :1000-20000 kg :400 mm Approach Speed:max. 100 mm/sec Pressure Speed:1-15 mm/sec :100 mm/sec :1-15 mm :S7 1200 Oil Tank Capacity:250 l

pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

pressure:20 t distance between columns:200 mm stroke:200 mm weight of the machine ca.:1,5 t dimensions of the machine ca.:2000 x 1420 x 760 m heating plates :660 x 220 mm :200 mm :200 mm Oil Tank Capacity:70 l Table Height:1100 mm :125 mm Ram Height:250 mm

pressure:400 t passage width:600 mm stroke:400 mm Weight of machine approx.:14 t dimensions:2380 x 1680 x 3580 mm Engine Output:36 kW Max Working height:750 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec column diameter:230 mm Return Capacity:40 t speed rapid traverse:25 mm/sec Travel:500 mm Oil Tank Capacity:600 l Oil Cooling:1,5 kW :6 m Monitor:WEG 12 Zoll :6800 ? :4200 ? Speed increase to 80 mm/sec.:19000 ? every additional meter conveyor belt:850 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t :1 Stück Column-Diameter:150 mm dayligth:1200 mm Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch

pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

pressure:2x 75 / 150 t passage width:2050 x 965 mm stroke:800 mm total power requirement:Hauptmotor 22 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:1500 x 1025 m :150 mm :150 mm :72 mm :2 kW :870 x 350 x 150 mm :1500 x 600 x 150 mm :1500 x 1025 x 75 mm :1500 x 1025 x 150 mm :120 mm :80 mm :350 l demand for oil:320 l :350 mm max. open height:1600 mm :15-0 mm/sec :100 mm/sec :2050 x 965 mm :6 mm :0,5 mm

pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung ...

pressure:150 t passage width:1200 mm stroke:700 mm total power requirement:35 kW weight of the machine ca.:13,5 t dimensions:ca. 3600 x 1900 x 5200 mm return capacity:15 t column diameter:160 mm table height over floor:1000 mm ejector stroke:250 mm pressure of ejector:50 t ejector speed:150 mm/sec dayligth:ca. 1000 mm table clamping surface LxW:ca. 1200 x 800 mm clamping area of ram:ca. 1200 x 800 mm :inkl. Ram Height:800 mm :min. 350 mm/sec feed under pressure:min. 60 mm/sec feed under pressure:min. 20 mm/sec return speed:min. 300 mm/sec weight of upper tool min.:1000 kg weight of bottom tool min.:1000 kg weight of tools min.:2000 kg material thickness:0,1 - 0,5 (1.4301 / 1.4828) mm :0,2 mm pro m :10 - 100 % :inkl. Oil cooling (electric):inkl. SIEMENS Controller S7 1200:inkl. :inkl. :inkl. USB interface for data transfer:inkl. Monitor SIEMENS:12 Zoll :inkl. :inkl. tool clamping:24.000,- ...

pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Mot ...

pressure:100 t passage width:700 mm stroke:450 mm weight of the machine ca.:6 t dimensions:ca. 3000 x 1210 x 3100 mm return capacity:10 t :22 kW Max Working height:850 mm :1 - 100 mm speed of return flow:1 - 100 mm/sec :1 - 10 mm/sec. pestle plate:1090 x 600 mm table plate:1090 x 600 mm positioning accuracy:0,1 mm table height over floor:800 mm :300 l Oil cooling (electric):1,5 kW (max) ejector:d=100 mm ejector stroke:210 mm pressure of ejector:100 t no. of ejector pins:1 Stück Monitor WEG:15 Zoll :2.000,-- ? :2.400,-- ? :3.000,-- ? :2.400,-- ? :5.800,-- ?

pressure:300 t passage width:600 mm stroke:500 mm Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Return Capacity:30 t Engine Output:30 kW Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist avai ...

pressure:150 t stroke:500 mm Weight of machine approx.:ca. 8,5 t dimensions:1200x1800x3100 mm Engine Output:10 kW Max Working height:1000 mm Approaching Speed max. :9,9 mm/sec Pressure Speed:100t = 9,9 bis 0 mm/sec Table height above ground level (approx.):1000 mm :Schmiernippel column diameter:230 verchromt mm Return Speed:25 mm/sec :500 l demand for oil:ca 400 l Maintenance Balcony:5800 ? :3900 ? :2800 ? :4800 ? :29000 ? :8200 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

pressure:20 t passage width:400 mm stroke:300 mm Weight of machine approx.:3 t dimensions:2200 x 650 x 2540 mm power capacity:ca. 4,5 kW table plate:400 x 400 mm pestle plate:400 x 400 mm daylight:300 mm table height over floor:950 mm :2 - 20 t :S7 1500

pressure:10 t distance between columns:200 mm stroke:200 mm weight of the machine ca.:1,5 t dimensions of the machine ca.:2000 x 1420 x 760 m heating plates :660 x 210 mm :200 mm :200 mm Oil Tank Capacity:70 l Table Height:1100 mm :125 mm Ram Height:250 mm

pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

pressure:125 t passage width:1000 mm stroke:500 mm Weight of machine approx.:6 t dimensions:2540 x 933 x 3000 mm return capacity:12 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:600 x 1300 mm table plate:600 x 1300 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) Engine Output:11 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:250 l speed rapid traverse:10 mm/sec column diameter:120 mm

pressure:125 t passage width:1000 mm stroke:500 mm Weight of machine approx.:6,4 t dimensions:2540 x 933 x 2900 mm return capacity:12 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:600 x 1300 mm table plate:600 x 1300 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) Engine Output:11 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:250 l speed rapid traverse:10 mm/sec column diameter:120 mm