136,461 used machines on RESALE, but how to find them? Machine Search
BALLER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Type: Konti 425C Year of manufacture: 1995 Klsdm Ajx Dk Ttsty Atel Feed opening: 102 x 175 cm Drive power: 170 kW Caedm Atyexx Su Uo Atsa Compression force: 85 t Settings: Horizontal, fully automatic Roll weight: 500-650 kg Press weight: 25 t PRICE ON REQUEST! ----- BALLER PAAL KONTI 425 C Technische Daten: Hersteller: Paal Typ: Konti 425C Herstellungsjahr: 1995 Bwsbjycfuqsmcbw Nveh Einfüllöffnung: 102 x 175 cm Antriebsleistung: 170 kW Kompressionskraft: 85 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 500-650 kg Pressgewicht: 25 t PREIS BEI ANFRAGE!
We are selling a BAUER 400 baler Technical specifications: Recycling press installation Manufacturer: BAUER Model: 401 Year of manufacture: 1994 Power: 22 kW Pressing force: 40-50 t Dimensions: 10300 x 2000 x 3000 mm Tipping weight: ~400 kg PRICE ON REQUEST! ----- Wir verkaufen Ballenpresse BAUER 400 Technische Daten: Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 401 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!
For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Kledex Dlanem Aty Atsl Pressing force: 115 t Settings: Horizontal, fully automatic Roll weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST! ----- Verkaufen horizontal Baller Paal Konti 425 D Technische Daten: Hersteller: Paal Typ: Konti 425D Baujahr: 2002 Einfüllöffnung: 102 x 200 cm Antriebsleistung: 2 x 45, 2 x 75 kW Druckkraft: 115 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 550-850 kg Pressgewicht: 36 t PREIS BEI ANFRAGE!
WE ARE SELLING A PRESSTATION WITH A SNECK SYSTEM WITH/WITHOUT ONE CAPACITY, SUITABLE FOR PRESSING RECYCLED RAW MATERIALS! MANUFACTURER - PRESTO GmbH (Germany) Type: SPN15 Year of Manufacture - 2006 CAPACITY - 30 m³ Power - 11 kW Can be sold unpainted or new painted. PRICE ON REQUEST!
Press container LM10 ASG Type – LM10 ASG Manufacturer – Ludden and Mennekes Year of production – 2012 Capacity – 10 m³ Power – 4kw
PRESSTATION KBW1593 WITH SCHOTT SYSTEM FOR SALE OR RENT! Technical data: Pressing force: 33 t/330 kN; Filling opening: 1,760 x 1,885 mm; Pressing chamber opening: 1,475 x 1,880 mm; Year of production: 2009 Electrical technical parameters: Power: 5.5 kW; Electrical connection: 5 x 2.5 mm² - CEE - plug 32 A; Duration of one working stroke: 55 sec. PRESSTATION CAN WE OFFER WITH 1 OR 2 BOXES.
: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 € : 436.8 € : 150 to : fix : 1520 mm : 300 mm : 1520 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 10 mm : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2450 mm : 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filter press Manufacturer Seitz Type 20 x 20 Technical specifications: 3 casting plates
Filter press stainless steel Manufacturer : Seitz Type: A20 Z Technical specifications : Stainless Steel Filter Press 4x filter plates 2x End Plates
Stainless Steel Filter Press Manufacturer : Seitz Type: 40x40 Technical specifications : Stainless Steel Filter Press 40x40 4 filter plates 2 end plates VA Length 1,200 mm (for 12 plates) Wheel-to-wheel width 720 mm
Feindie Press Feintool Ostenwalder Cutting force 100 ton Total force 160ton Hydr. back pressure 0-40 yon Hydr. Hold-down 0-50 ton Stroke rate 18-72
Battery-powered hydraulic crimping tool KLAUKE EK 22-plus 6 – 300 mm² for press connectors and tubular cable lugs. Inserts: KL-Cu D 22/50 + KL-Cu 95+ KL-Cu 120+ KL-Cu 185. Pressing range 6 – 300 mm² Cu. Pressing force: 60 kN. Crimping head can be rotated 330° Areas of application & details: The device is ideal for the professional crimping of crimp connectors and tubular cable lugs in the electrical trade. Cable Lug Press for Klauke Narrow Crimp Inserts (Series 22), Crimping Pliers, Crimping Device, Hydraulic Cordless Press, Crimping Tool, Cable Tool, Electrohydraulic Press, Klauke EK22, Cordless Press for Electricians.
Key data: 250 t, 55 mm
Punching Press Minster Clutch Control Diameter 250 ton Stroke 55mm incl. Decoiler Perfecto type 28-12-7
Key data: 160 t, 1000 mm, 600 mm
STROKE 500 mm TABLE AREA 1000x850 DISTANCE BETWEEN COLUMN 1010mm DAYLIGHT 350 mm Approx speed 400 mm/s Motor: 40 kw
Key data: 250 t
Hydraulic press SCHULER Pressure 250 ton
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 30 to PRESS TABLE table surface (left-right): 580 mm table surface (front-back): 360 mm thickness of bolster plate: 60 mm opening in bed (diameter): 110 mm SLIDE table surface (left-right): 350 mm table surface (front-back): 250 mm spigot hole diameter: 40 mm SLIDE (MECHAN. PRESS) slide adjustment: 60 mm stroke min.: 9 mm stroke max.: 76 mm stroke rate (max.): 140 /min main drive power: 2.2 kW TOOL ASSEMBLY DIMENSIONS distance table - slide max.: 214 mm ELECTRICAL SPECIFICATIONS total power consumption: 2.25 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 1.08 mm space requirements -front/back-: 1.05 mm total height: 2.1 mm total weight approx.: 1800 kg ATTACHMENTS (PRESSES) 2-hand engagement: yes European CE st ...
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 34500 € : 658.95 € : 100 to : fix : 835 mm : 500 mm : 780 mm : 1050 mm : 25 mm/s : 10 mm/s : 4 mm/s : 800 x 600 mm : 700 x 350 mm : 1800 mm : 1000 mm : 2400 mm : 2050 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the ...
CONTROLS electronic controls PRESS DESIGN drive system: hydraulic frame design: 4 column number of suspensions: 1 slide ejectors / cushion: yes table cushion: yes PRESS FORCES total force (nominal): 200 to PRESS TABLE table surface (left-right): 1330 mm table surface (front-back): 1150 mm height above floor level: 850 mm opening in bed (diameter): 250 mm SLIDE slide force: 200 to table surface (left-right): 1200 mm table surface (front-back): 1200 mm stroke: 800 mm SLIDE (HYDR. PRESS) approximation velocity max.: 300 mm/s working velocity min.: 30 mm/s return velocity max.: 400 mm/s return force: 200 to SLIDE EJECTOR / CUSHION working principle: hydraulical nominal force: 30 to stroke: 130 mm DIE CUSHION (TABLE CUSHION) cushion force: 30 to stroke: 850 mm ELECTRICAL SPECIFICATIONS mains ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : fix : 1500 mm : 300 mm : 1520 mm : 680 mm : 10 mm/s : 5 mm/s : 6 mm : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2275 mm : 2500 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand operating panel Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 163 t
Hydraulic 4-column press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 t. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm and a stroke of 700 mm, making it suitable for forming, straightening, pressing, press-fitting and assembly work in industrial use. Technical data + information: Hydraulic 4-column press – 163 T – 2,000 × 1,400 mm General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4 160-K3 - Machine number: 1606.18 - Year of construction: 2015 - Press force: 163 t - Nominal force: 1,600 kN - Table size (usable area): 2,000 × 1,400 mm - Plunger plate size: 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,300 mm - Stroke: 700 mm - Front passage: 2,010 mm - Side passage: 900 mm - Total height ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 41200 € : 786.92 € : 40 to : 1550 mm : X und Y Achse : 160 mm : 1260 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 5.5 kW : 2000 mm : 1600 mm : 2235 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): laser safety device Fiessler NC controlled R axis manual crowning table motorized crowning table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combina ...
Hydro-pneumatic corner jointing presses with support arms and new foot switches Profile height max. 140 mm Punching height max. 93 mm Punching stroke: 15 mm Press force 45 kN Weight approx. 280 kg
: neu : 2025 : 080091 : prompt, Zwischenverkauf v : Türkei : 51120 € : 966.17 € : 1 : 60 to : 2550 mm : Y1 / Y2 und X Achse : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 120 mm/s : 9 mm/s : 70 mm/s : 620 (mit optionaler R-Ach mm : 250 mm/s : 813 mm : 104 mm : 100 l : 5.5 kW : 3250 mm : 1200 mm : 2350 mm : 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table interm ...
Offer 26226 Technical data: - Pressure capacity 220 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table height 950 mm - Projection 450 mm - Installation height 550 mm - Drive 400 V / 18.5 kW - Floor recess - Space requirement approx. W 3500 x H 2950 x D 2000 mm - Weight machine approx. 17500 kg - Two-hand control panel with foot switch - Back gauge adjustable from the front by handwheel - Various bending tools
Centrisys decanter centrifuge set including: - a centrifuge -complete electrical cabinet -polymer preparation -eccentric pump All in perfect condition Currently in operation until the end of August 2026
The technical specifications of the Elektror HRD 16T FU-115/4.0 fan include: Volume flow: Up to 97 m³/min Pressure: 21,000 Pa
Key data: 300 t
Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine Type: Hydraulic Press Year of Make: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table surface: 2,000 × 1,550 mm Plunger area: 2,000 × 1,540 mm Passage at the front: 2,000 mm Side passage: 1,050 mm Table height: 800 mm Fast forward: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Throw pillow: no Equipment: Complete DREHER conveyor system DREHER Belt Unwinder DREHER Belt Feed DREHER belt conveyor system Hydraulic cut impact damping with parallel hold Hydraulic Rolling Blocks Tool change consoles Siemens SIMATIC control ...
Manufacturer: Müller Stanz- und Umformtechnik GmbH & Co. KG Type: PMLE250x1700 R-HK Engine No.: A05036-02 Year of Make: 2006 Machine Type: Eccentric Press Press force: 2500 kN Press force: 250 t Stroke rate: 20–120 min⁻¹ Stroke: 25–125 mm Plunger adjustment: 100 mm Voltage: 400 V Motor power: 55 kW Connected load: 100 kW Weight: 47,000 kg Throw cushion: No Condition: Used Machine loses hydraulic oil Several leaks present in the hydraulic area Clamping pins for plunger adjustment deactivated due to hydraulic leaks Sale without conveyor system Videos available on request Location: Freiburg
CONTROLS conventional PRESS FORCES total force (nominal): 800 to Safety distance 141 mm, maximum overrun 39 mm, rapid lowering speed 400 mm/s
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 252800 € : 600 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3100 mm : 410 mm : 700 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 280 l : 5750 mm : 2500 mm : 4000 mm : 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transp ...
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 69320 € : 1310.15 € : 100 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 900 mm : 104 mm : 11 kW : 4200 mm : 1670 mm : 2850 mm : 8500 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC CONTROLLED CROWNING TABLE ...
Key data: 45 t, 2000 mm
Manufacturer: Gasparini Model No.: PBS 045 Year: 2000 Condition: Used Stock number: 9391 Compressive force: 45 t Maximum bending length: 2000 mm Machine weight: 3450 kg
pressure: 100 t Working width max.: 300 mm serial number: 55505 voltage: 380 V weight: 5000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 € : 455.04 € : 40 to : 800 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Features Volume 6000 L Material No. V2A Operating pressure 8 bar Total height 1600 mm Cylinder height 1300 mm Outer diameter 1400 mm Depth 4600 mm Description Tank crest: Flange connection for pressure fitting with piping pulled forward Front: Clapper bottom Pressure fitting Flanges with sample tap Manhole 410 x 320 Clarification drain with pressure fitting Franz Vogel Rear: Clapper bottom Underbody: Residual drain pipe with angled seat valve DN50 2 bearing cups
: neu : ca. 4 Monate ab Auftragse : Italien : 70000 € : 1323 € : 300 to : fix : 500 mm : 1500 mm : 20 mm/s : 2 mm/s : 2800 mm : 1500 mm : 3200 mm : 6000 kg table with integrated cylinder to lift the workpiece control by levers as well as control panel (2- hand) regulable maximum pressure Manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty. 1 Second-hand Extruion Press Mfc.: UBE Force: 2750 MT Type: Horizontal, Oil hydr., Built: 2017 Stopped: 2025 Billet size: Ø 254 × 1000 mm Length Speed press go out: 20 ㎜/sec Empty vehicle forward one cycle: 20 sec Output-theoretical cycle time: 160 sec
pressure: 100 t chamfer lenght: 3050 mm distance between columns: 2550 mm total power requirement: 20 kW weight of the machine ca.: 7.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 t no. of strokes: ca 72 Hub/min dayligth: 195 mm total power requirement: 1,5 kW weight of the machine ca.: 330-400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 € : 504.24 € : 1 : 40 to : 1500 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2000 mm : 950 mm : 1900 mm : 1800 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 202100 € : 3869.08 € : 320 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 1100 mm : 154 mm : 160 l : 7500 mm : 1910 mm : 3350 mm : 29000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and ...
A valve for regulating the flow and pressure of a hydraulic system. Model A: max flow rate of 60l/min, factory set pressure at 140 bar. The set pressure can be increased up to 220 bar.
Hydraulic Flow and Pressure Control Valve14 Model B: max flow rate of 114 l/min, pressure set at the factory at 140 bar. The set pressure can be increased up to 220 bar.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 € : 982.8 € : 150 to : fix : 1250 mm : 500 mm : 700 mm : 1500 mm : 20 mm/s : 10 mm/s : 3 mm/s : 1200x700 mm : 1250x400 mm : 2400 mm : 1200 mm : 2800 mm : 5200 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...
: neu : ca. 4 Monate ab Auftragse : Italien : 160000 € : 3024 € : 300 to : 500 mm : 4.000 x 2.550 mm : 700 mm : 20 mm/s : 2 mm/s : 3550 mm : 4000 mm : 2600 mm : 15000 kg : horizontal verschiebbar : 2550 mm : 1.800 mm : 2.800 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...
: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 38000 € : 725.8 € : 100 to : fix : 1250 mm : 500 mm : 780 mm : 1500 mm : 25 mm/s : 10 mm/s : 4 mm/s : 1300x600 mm : 1250x400 mm : 2400 mm : 1200 mm : 2450 mm : 2450 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...
Features Volume 10600 L Material No. V2A Working pressure 2 bar Operating temperature range 2 C Total height 3900 mm Diameter 2000 mm Description Topsoil: Clapper bottom/ curved back Threaded connection DN32 Ladder hooks Cylinder: Level indicator with DN20 hose Manhole oval 440 x 340 Sample tap DN15 CIP line with airflow valve with pressure relief valve and pressure gauge with Disc Valve DN20 with T-Piece with Disc Valve DN32 Underbody: Clapper bottom/ curved back Central outlet with residual drain pipe pulled forward with disc valve DN65 flush with the tank wall 4 profile feet with calottes - height adjustable
maximum number of results exceeded
please refine your search
