rubber press used for sale

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 1.0 kp/cm² (0 - 1.0 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New !' Dimensions(Single Pressure Gauge): 138 x 100 x 48 mm Dimensions(Packing): 140 x 105 x 105 mm

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Contact pressure gauge, pressure gauge with switching contacts MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 4 kp/cm² (0 - 4 bar) ) Switch Type: 2/Z102-1 Switching Capacity: 220V AC/DC 30W(VA) Housing Diameter: Ø 160mm Accuracy Class: 2,2,000V AC/DC 5 flange diameter: Ø 160 mm with protective membrane ! New ! Dimensions: 220 x 210 mm

Contact pressure gauge, pressure gauge with switching contacts MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 16 kp/cm² (0 - 16 bar) Switch Type: 2/Z112-1 Switching Capacity: 220 V AC / DC 30 W (VA) Housing Diameter: Ø 160 mm Accuracy Class: 1 Connection Thread: M20 x 1.5 New ! Dimensions: 210 x 205 x 150 mm

Test manometer with test valve MESSGERÄTEWERK BEIERFELD 1/FM20/2 0 - 1,0 - 1,0 6 kp/cm² (0 - 1.6 bar) TGL16374 accuracy class: 0.6 housing diameter: Ø 160 mm test valve with test connection M20 x 1.5 TGL16401 in wooden case New !' Dimensions: 330 x 195 x 145 mm

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

Test manometer with test valve MEASURING INSTRUMENT PLANT BEIERFELD 1/FM20/2 0 - 2,0 - 2,0 5 kp/cm² (0 - 2.5 bar) TGL16374 accuracy class: 0.6 housing diameter: Ø 160 mm test valve with test connection M20 x 1.5 TGL16401 in wooden case New !' Dimensions: 330 x 195 x 145 mm

Pressure gauge MEASURING INSTRUMENT PLANT BEIERFELD 1/FM20/2 0 - 16 kp/cm² (0 - 16 bar) TGL16374 Accuracy class: 0,6 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Manufacturer: Wemhöner Membranenpresse, Year: 1996, Type: KT-VP 28, Number of tables: 1, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Elektro, Nutzfläche : 2500 X 1300, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10--60, Working widht max mm: 1300, Press length mm: 2500, Pressing width mm: 1350, Kw Heizleistung obere Heizplatte: yes, Max. temperature °C: 220, Foil magazin spaces: 8, Veneer/ foil thickness max mm: möglich, Through running machine: yes, Folienpaternoster: yes, Through running machine: yes, Year :1996

Contact pressure gauge, pressure gauge with switching contacts MANOMETERWERK WITTGENSDORF 0 - 600 kPa (0 - 6 bar) Switch type: 2/Z112-1 Switching capacity: 220 V AC / DC 30 W (VA) Housing diameter: Ø 160 mm Accuracy class: 1 Connection thread: M20 x 1,1,01 5 New !' Dimensions: 210 x 205 x 150 mm

1:1 Pressure Converter, Pressure Converter VDO MESS- UND REGELTECNIK GmbH Type: 21 / 16 Best: No. 055834 Supply air pressure: 1.4 - 4.4 bar to Measured value: 4 mbar - 4.0 bar with accessories New ! Dimensions: 78 x 78 x 45 mm

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

Manufacturer: Bermantingen, Type: DIXI 30 S, Hydraulical/pneumatical: Hydraulisch, Presskraft max.kN : 300, Zykluszeit Sekunden: 29, Presszeit Sekunden: 14, Höhe vom Boden cm: 94, Geteilte Einfüllöffnung B x H cm: 107 X 26, Höhe vom Boden cm: 94, Breite cm: 160, Höhe cm: 317, Ballen ausgeworfen B x H x T: 120 x 80 x 80 x 110, Ballengewicht Kg: 270-360, Weight approx. kg: 2180,

Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990

Contact pressure gauge, pressure gauge with switching contact WIKA 212.20.100 Cont. 821.111 0 to 250 bar Ø 100 mm with diaphragm seal (approx. 1500 mm cable) New! Dimensions: 120 x 60 x 55 mm

Manufacturer: Italpresse, Year: 2000, Type: Lock Form SS AIR , Control: 1330, Number of tables: 2680, Automatisches Rüsten: 55, Work piece width min-max mm: elektrisch, Min.-max. workpiece height in mm: 150, Press length mm: 2, Membrane: 1450 x 2800, Foil magazin spaces: no, Foil types: yes, Brushing machine: yes, Year :2000

Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Manufacturer: Himmel Hochfrquenz Presse, Year: ca.1993, Work piece width min-max mm: 20-150, Min.-max. workpiece length in mm: egal, Min.-max. workpiece height in mm: 6-40, High / low pressure: yes, Vertikaldruckzylinder: yes, Horizontaldruckzylinder: yes, Haltezylinder zum Fixieren der Hölzer: yes, FREE TEXT: Hofrequenz für Rahmenteile, Year :ca.1993

Pressure transmitter REXROTH HM20-20/250 R901342027 Measuring range: 0 - 250 bar U(signal): 0.1 - 10 V DC U(supply): 18 - 36 V DC used, tested ! Dimensions: 130 x 22 x 20 mm

Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

Pressure transmitter HYDROTECHNIK HT-PD 3403-53-NO.54 Measuring range: 0 - 210 bar U(signal): 0.1 - 10 V DC U(supply): 12 - 32 V DC used, tested ! Dimensions: 100 x 40 x 22 mm

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

Pressure Transmitter, Piezoresistive Pressure Transmitter PMA P21R/120 51863 0413.0250 Measuring range: 0 - 120 bar I(signal): 4 - 20 mA DC U(supply): 8 - 28 V DC used, tested ! Dimensions: 100 x 40 x 22 mm

Manufacturer: Limatech, Type: MPS 20, Year: 1998, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding speed max m/min: ca. 30, Feeding speed continous adjustable: yes, Machine rigging: automatisch, Compressed air bar: 6, Wight approx. kg: 3000, Year :1998

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

Pressure transmitter, level transmitter HENGESBACH KERAMESS G1/2B 30mbar4/2LF Measuring range: 0 - 100 bar < br /> Pmax: 4 bar I(signal): 4 - 20 mA DC U(supply): 13 - 36 V DC stainless steel ! used, tested ! Dimensions: 160 x 90 x 70 mm

Manufacturer: Igomak, Year: ca. 1970, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Stück/Durchmesser 100 ca, FREE TEXT: Heizplatte Oben/Veröängerte Tisch jede Seite 1000 mm, Year :ca. 1970

Pressure regulator manually adjustable, ultrapure gas regulator DRUVA type: LMD-500-01 inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Manufacturer: Bürkle, Year: 1997, Type: BTF 1426, Work piece width min-max mm: 1100, Min.-max. workpiece length in mm: 2350, Min.-max. workpiece height in mm: 6-35, Working widht max mm: 1180 X 2430, Heating system: Thermoöl, Heating power in kW: 25, Foil magazin spaces: 10, Placing table: 3, Through running machine: yes, Folienschneideeinrichtung: yes, Through running machine: yes, Year :1997

pressure: 1 t Stroke: 315 mm table surface area: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure regulator hand-adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262-242H283 inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

Used press in top condition Bj. 2011 New solid core plate with vacuum holes Press width 1700 mm Press length 3700 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2260-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor

Pressure reducer, pressure regulating valve MANKENBERG 652 G1 6570036TA-EM Temp.: 130°C 2 to 5 bar PN 40/10 stainless steel !' New !' Dimensions: 310 x 145 x 115 mm

Pressure relief valve, relief valve LESER TUEV-SV 95-425 5394.2302 D0 10 D/G 0.36 F 0.26 10 bar G1/2 Material: stainless steel 1.4408 New ! Dimensions: 182 x 72 x 55 mm

- With 20 plates - With 20 canvases - Machine in perfect condition Dimensions : - Length: 2000 mm - Width: 700 mm - Height: 1500 mm

Pressure Switch MERTIK 612.01 0.1 to 1.85 kp/cm² Switching Capacity(AC): 2.5 A 380 V 50 / 60 Hz Switching Capacity(DC): 0.16 A 220 V IP55 New ! Dimensions: 180 x 55 x 135 mm

- Membrane: PVC, 2019. - Stainless steel cage, semi-perforated - Frame: Made of steel, on castors - Mesh size: Stainless steel, Friedrich connection no. 2 40 - Central filling Dimensions: - Length: 3400 mm - Width: 1750 mm - Height: 2300 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2262-242-009 inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

LVD brand press - type TPI 80/25 - 80 ton

Operating pressure: 2800 bar, Flow rate: 27 l/min, Drive: Volvo Diesel, 160 kW, Operating hours: approx: 350h Trailer, incl. accessories,

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2261-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm

pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 t, 160 mm

Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T