rubber press used for sale

Horizontal 4 column design full hydraulic clamping system Rubber Injection moulding machine A machine that used very little.very clean .There is no problem in the machine.The machine has a brush Clamping force : 1979 KN Injection volume : 1500-3500 mm Heating plate dimension : 710 x 800

Rubber Spring Buffer, Crash Buffer, Crane Rubber Buffer PAGUS TGL 35268 ( TGL35268 ) Diameter: 160 mm Mounting screws: M16 New ! Dimensions: 160 x 160 x 160 mm

Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel

Rubber expansion joint, pipe connector TUBOFLEX HAMBURG Model 5B DN 100 width: 100 mm flange: Ø 220 mm Material flange: Aluminum New ! Dimensions: 220 x 220 x 210 mm

Rubber expansion joint, pipe connector TUBOFLEX Type 5 B DN 100 width 100 mm flange: Ø 220 mm Alufflange ! Dimensions: 220 x 220 x 100 mm

Rubber bladder for membrane accumulator HYDAC 2122978 Capacity: 50 liter Length: 1550 mm Diameter: Ø 205 mm Material: NBR with gasket assortment New ! Dimensions (packaging): 1650 x 220 x 220 mm

L/D=20.7 External dimensions 2700×1000×1400(LxWxH) Screw stiffness HRC65-68 Screw diameter 90mm Engine power 30KW/1470rpm SCREW LENGTH 1860 mm Heating section number/power 6kw×2

General SKU408U1286 LocationBarneveld MakeScan-Vibro VAV TypeSRS 1250x3200 No.40459 Year of construction2009 Main Features MaterialStainless steel Surface4 m2 Size length3200 mm Sizes width1250 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface4 m² Number of sieve decks:2 Sieve sizes1250x3200 mm With covercheck (3x)1250x600 mm InletDia. 250 mm OutletDia. 250 mm (2x) Drive vibro motor2x Motor2.2 kW, 680Volt (ATEX II2G/D EExe IIT4) (2x) Sieve perforation2x2mm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Total height2,20 m Weight2000 kg CEcheck Floor space4,20x1,6 m ATEX compatiblecheckPlastic & rubberPlastic & polymersOther feedOther chemicalOrganicsConsumer wasteVibro sievesVAV Scan-VibroIndustries > Recycling > Plastic & rubberIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Other fe ...

Tyre retreading plant Complete production plant retreading plant for cold-retreaded truck tyres Output: up to 200 pcs/day Equipment: Pos.1 Rail System "Helm 500" Frame/Supports Manufacturer TRM Rail length approx. 110m, rail height approx. 2m 76 hooks with rollers 3 processing stations incl. extraction connections Spray tunnel for rubber solution incl. extraction Year of construction: 2008 Pos. 2. Roughening machine Matteuzzi RAS 90 DC 4 defect (drive shaft defective) Manufacturer: Matteuzzi Type: RAS 90 DC4 Machine number: 522 Year of construction: 2004 Pos. 3. Roughener Matteuzzi RAS 98 E ULTRA (as good as new) / Training device from training center Manufacturer: Matteuzzi Type: RAS 98 E Ultra Machine number: 522 Year of construction: 2013 Pos. 4 Roughening machine Bandag EHRD 23 X Machine number: 1031 Year of construction: 1993 Pos. ...

Key data: 120 mm, 18 , 45 1/min

Screw with vacuum zone, output approx. 255 - 400 kg/h, straight head

Key data: 90 mm, 12

Extruding height 1010 mm, Mailefer screw,

Description: Lot composed of approximately 100 anti-vibration rubbers for YANMAR radiators - art 119255-44660 ITEMS NEVER USED STILL IN ORIGINAL PACKAGING Approx. Onsite Dimension. (l x w x h): 400 x 400 x 300 mm, weight approx.: 10 kg

Key data: 90 mm, 16

available Triplex Extruder- Cold Feed with head and feeder. Description attached!

Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10

VF600 MK3 Shadow Graph Manufacturer: Starrett Horizontal Travel 8" (200mm) Vertical Travel 4" (100mm) Focus Travel 4" (100mm) Top Plate 16" x 9" (400 x 230mm) Glass Insert 9-1/4" x 5-1/2" (235 x 140mm) Image: erect and reversed With new screen, curtains & wiper brackets Fully operational / functioning optimally

Betol PVC Extrusion Line Type BC50 0-100rpm 4x Eurotherm barrel controllers Start / Stop Stainless Steel Water trough Width 200mm x 36” Comes out hot and goes through tunnel which cools it down and turns it rigid and into a Haul Off

Reinforced air bag generally used for long and short necked bottles.  - Quick fixing nut, - Threaded stud, - twin feeding tube on request,- for measurements see the data sheet. Different versions of air bag / depaltizer gripper / inflatable rubber / gripper for bottle / bottle neck gripper All variants available on customers requestPlease specify the variant or measurements when ordering Tolerance: +/-2,5mm More then 300 machines new and second hand on our seema .de

Fine trainer system from UTH, type Roll-Ex 70 TRF

cold feed pin extruder, EEK 125.10 M, piebald speed 10 to 60 rpm, drive 135 KW AC,

Description: JPC rubber skid model HT320, lifting height 2450 mm, equipped with auxiliary systems for hammer and accessories Approx. Onsite Dimension. (l x w x h): 2,100 x 1,050 x 1,200 mm, weight approx.: 320 kg

Description: JPC rubber skid model HT320, lifting height 2450 mm, equipped with auxiliary systems for hammer and accessories Approx. Onsite Dimension. (l x w x h): 2,100 x 1,050 x 1,200 mm, weight approx.: 320 kg

Description: JPC rubber skid model HT320, lifting height 2450 mm, equipped with auxiliary systems for hammer and accessories Approx. Onsite Dimension. (l x w x h): 2,100 x 1,050 x 1,200 mm, weight approx.: 320 kg

Description: Please download the PDF with all the information about the company and the industrial equipment for sale , Plant OF A RECYCLED POLYMERS – CRUM RUBBER GRANULES The installed technology employs the cryogenic process. This technology is rare in Europe on an industrial scale Provides superior cryogenic rubber granules for both raw material and end product applications. Cryogenic granules have as their main applications: Infill for football pitches and golf courses in synthetic turf, Ecological road pavements of high resistance and durability (crumb rubber modified bitumen), Shock-absorbing and anti-compacting floors for horse riding rings and arenas, Raw material for the polymer manufacturing industry (rubber and plastic). This factory is currently the most notorious European producer offering cryogenic rubber granules. Exported is production to countries r ...

Single column hydraulic press, straightening press, punching bar ECKOLD press frame with hydraulic cylinder, mobile press, punching unit type RSD 1500 - 125 Masch. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Projection 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface 125 mm Installation height (tappet to table) max. 265 mm Table height above corridor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit tappet surface with 4 threads M16 and 20 mm guide groove, in the middle a centering hole 15 mm- 1 piece high-pressure hydraulic hose with male thread M30x1.5 mm , Hose length 4 meters - 1 piece High pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg good condition; used

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

Cat-Nr 09-2070 in a very good condition! Apex 1500 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red currents. Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt:1500 mm Speed of belt:0-11 m/min Air pressure min:>4 bar Air pressure max:8 bar More Information and photos upon request! Manual Instructions available! Subject to prior sale. All prices are valid Ex-Works, excl.VAT. The mentioned price is valid inly for 1 Pressing Station 1500. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

used membrane chamber filter press / filter press Passavant Noggerath 1200 x 1200 frame size: K1200 / 110 format of the filter records: 1200x1200 execution: unanimously (filtrate derivation by a collective management) material of the filter records: PP material of the membrane records: PP number of the filter chambers: 100 max. / 33 strength of the filter cake: 30 mms mix pack filtration surface: 230 max. / 76m? filtration volumes: 2985 max. / 985 litres filtration pressure in the chambers: 8 cash max. pressure under the membrane: 15 cash max. temperature with filtration: 20 °C max. material of the filter cloth: PP working pressure in the hydraulic cylinder: 400 cash max. dimension of the chamber filter press: Length: 9,786 mms, width: 2,550 mms, height 2,100 mms weight of the chamber filter press without mud: 18,210 kg of MAX hydraulic oil: OH-HM 32  ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800 x 800 Plate size: 800 x 800 mm Chamber number: 100 pieces Filter pressure: 15 bar

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEHIS /1200 x 1200 Plate size: 1200 x 1200 mm Useful length: 2500 mm Chamber number: 44 pieces Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: min. 380 bar / max. 440 bar Total filter area: 110.5 m2 Cake volume totalling: 1504 litres

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500 x 1500 Useful length: 9000 mm Chamber number: 129 Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: 380 bar Test pressure: 440 bar Operating temperature: 50 C Total filter area: 460 m2 Cake volume totalling: 6.2 m3 Motor voltage: 380 volts Plate material: PP Operation page: Right and left Plate transport: fully automatic

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 (Mix) Plate size: 1200 x 1200 mm Membrane plates: 54 pieces Chamber plates: 55 pieces Membrane pressure: 15 mm Filter pressure: 10 bar Closing pressure: min. 350 bar, max. 380 bar Total filter area: 242 m2 Cake volume totalling: 4320 litres Number of filter presses: 2 pieces

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEH 800 x 800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 20 mm Filter pressure: 15 bar Closing pressure: Min. 240 bar / max. 300 bar Total filter area: 64 m2 Cake volume totalling: 640 litres

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 80 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 30 mm Useful length: 3500 mm Chamber number: 58 pieces Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Total filter area: approx. 1.8 m3 Expiration: closed Plate material: PP Filter cloth cleaning system: optional Filter cloths: optional

Hydraulic C-frame press Tool testing press / straightening press Pressure power hydraulic unit approx. 400kg/cm2 Printing capacity of the press approx. 270to Partially overhauled! Hydraulic cylinder sour overhauled, recoat Table clamping area 1.300x500mm Flat of the printing plate 700x400mm Number of T-slots 2 pcs with width 22mm Piston rod diameter 290mm maximum installation height 750mm Piston path 350mm Extension C-frame to center piston 270mm Extension C-frame to front edge pressure plate 480mm Width C-frame 500mm Aeussere Dimensions Depth 1,800mm Width 1,300mm Rxvukelzy Height approx. 3,000mm Weight approx. 5to Rest according to photos Special price

used chamber filter press / filter press Passavant A 1500 record size: 1500 x 1,500 mms benefit length: 10,510 mms chamber number: 160 pieces cake thickness: 30 mms cake contents: 8.4 m3 filter pressure: 16 cash Schliessdruck: 380 volts expiry: unanimously whole filter surface: 614.5 m² engine tension: 380 volts / 50 hertz

Used chamber filter press / filter press Rittershaus & Blecher / R & B 500 x 500 Side holm guided Plate size: 500x500mm Cake thickness: 25 mm Useful length: 2200 mm Chamber number: 47 pieces Filter pressure: 15 bar Closing pressure: min. 220 bar / max. 260 bar Cake volume: approx. 3.9 m3 Total filter area: approx. 17.4 m2 Expiration: closed Plate material: PP Plate transport: manual Filter cloths: optional Pump: Abel diaphragm pump optional

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Useful length: 5300 mm Number of plates: 71 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: automatic Filter cloth cleaning system: yes Filter cloths: optional Membrane mix package incl. control cabinet, filling pumps, membrane pressure pumps The facility is in very good condition.

used chamber filter press / filter press Netzsch 1200 x 1200 record size: 1200x1200mm cake thickness: 30 mms benefit length: 8,200 mms chamber number: 120piece filter pressure: 15 bars record transport: at the side automatically

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 30 mm Useful length: 5300 mm Number of plates: 72 pieces Filter pressure: 15 bar Expiration: closed Plate material: PP Filter cloth cleaning system: optional Filter cloths: optional

Used chamber filter press / filter press Rittershaus & Blecher / R & B 2000 x 2000 Plate size: 2000x2000mm Cake thickness: 20 mm / 30 mm Useful length: 12000 mm Chamber number: 121 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 320 bar Cake volume: approx. 8.1 m3 Expiration: closed Plate material: PP

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 90 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used membrane chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Number of plates: 35 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: automatic Filter cloths: optional Product-contacting stainless steel contactee ropes ! The facility is in very good condition.

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Useful length: 5300 mm Number of plates: 40 pieces expandable to 51 Filter pressure: 8 bar Expiration: closed Plate transport: automatic Filter cloths: optional

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800x800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 30 mm Filter pressure: 15 bar Closing pressure: min. 380 bar / max. 440 bar

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 128 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used membrane chamber filter press / filter press Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 15 times !